Question about Pontiac G5

Open Question

2009 pontiac g5 auto trans shifter light stays put in neutral won't show drive reverse etc runs great help please ps it's auto on floor console

Lights up orange always in neautral

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bunnydawg
  • 5158 Answers

SOURCE: reverse lights don't work

simple thing first... make sure the bulbs are not burnt out... check the fuse.... then there is a sensor/switch located either on the steering colunm or on the transmission. quick test... put it in reverse and jiggle the shifter... if they come on that takes care of the first two issues....

Robert

Posted on Sep 11, 2008

onyeredson
  • 404 Answers

SOURCE: reverse lights 89 volvo 240 sedan

Hi,
Your brief description doesn't state whether auto/manual? I would be looking at the reverse light switch on the gearbox.
Take the clip off and bridge the connection with a paper clip or similar, keep it away from the vehicle as you will blow a fuse, turn ignition on and bingo, hopefully Blackpool illuminations back of your 240?
Good Luck!
Please remember to rate my effort.
Paul 'W'
Onyer~EDson(:0) {#><U.K.

Posted on Jan 19, 2009

dealt_soul
  • 296 Answers

SOURCE: 2001 fronteer crew 4x4 dash lights

Check instrument panel fuse first. It would be labled on the fuse door or in manual. If not blown i would suspect the dimmer switch. There are to many bulbs in a instrument panel for them all to blow at one time.

Posted on Feb 15, 2009

  • 149 Answers

SOURCE: car will not shift into gear

Sounds like a linkage/cable to me. Disconnect the linkage at the transmission and move the shift actuator by hand to see if there is the same things happening. Don't try to do this with the engine running unless someone is holding the brake inside the car.

Posted on Jul 03, 2009

GARYca
  • 672 Answers

SOURCE: check engine light has come

You must get the error code read for the check engine light in order to get helped here. Bring your vehicle to a local autozone to have your vehicles computer scanned, its free or local shop (most charge for this). Post the codes on fixya for further assistance.

Posted on Jun 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find the backup light switch for a 2009 Pontiac g5 automatic transmission


The "back-up Reverse light switch I believe is incorporated in the gear shift selector Dash or console mounted?

Dec 14, 2014 | 2009 Pontiac G5

1 Answer

I have a acura mdx 2003 and the reverse lights stay on even when it's in drive what do I do?


Replace your reverse light switch . It's more than likely sticky or stuck. It is located on the transmission under the car. Inside the trans. Some cars have them in the shift linkage area in the shifter console . You didn't specify if auto or manual trans.

Aug 09, 2013 | Cars & Trucks

1 Answer

2009 Toyota Camry won't go in gear


only fix is to rebuild trans. or replace clutch packs are out or seal are out

Feb 15, 2013 | 2009 Toyota Camry

1 Answer

Adjusting transmission shift cable


on the cable there is a release on the cable lift up the lock put trans in park and the shifter in park then lock it into place

Mar 24, 2012 | 2005 Chevrolet Malibu Maxx

1 Answer

I have a 2007 Pontiac G5 which will not go completely into the park position (automatic) which will not allow the key to completely shut off and be removed, meaning the lights stay on. Will start and...


typically your problem is in the column. That's for cars that have the shifter on the column. What's happening is the gears aren't lining up to put the shifter in the park position. Unless mechanically inclined you'll have to take into a shop.

Kdog

Dec 29, 2010 | 2008 Pontiac G5

1 Answer

Top speed 20 mph


If this vehicle is a 2009/8 model then whatever is wrong with it will be under warranty.

Dec 20, 2009 | 2009 Chrysler Town and Country

1 Answer

Chrysler concorde car wont shift from reverse to park


it sounds like your gearshift cable is broken..if you can jack up vehicle and support it safely,get someone to move shifter and look on driver's side of transmission and see if linkage is moving on trans..linkage is up near top of trans..i have seen this problem before

Jul 30, 2009 | 2000 Chrysler Concorde

1 Answer

Car will not shift into gear


Sounds like a linkage/cable to me. Disconnect the linkage at the transmission and move the shift actuator by hand to see if there is the same things happening. Don't try to do this with the engine running unless someone is holding the brake inside the car.

Jul 03, 2009 | 1997 Mercury Cougar XR7

2 Answers

Need to locate backup light switch on 1988 chevy 1500


I had the same problem. My backup lights wouldn't come on in when I put the auto. trans. shifter into the Reverse position. They WOULD come on briefly as I moved the shifter from Park position into Reverse, but would go off again when the shifter reached the Reverse detent. I got the solution from the Haynes service manual, in which the relevant switch is referred to as something like the neutral safety switch. Check on top of the steering column close to the firewall. Set the parking brake, then move the auto. trans. shifter into Neutral position. Get under the dash and rotate the neutral safety switch clockwise as far as it will go. Then move the shifter into the Park position, and your switch should be set. If the backup lights don't come on now when the shifter is put into Reverse position with the ignition switch 'on', there may be another problem.

Feb 10, 2009 | 1988 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...