Where do i place the jack to change a rear tire
Hello, When you look at the panel under the Rear and Front Doors you will see a Triangle mark under each door. The rear triangle is under the rear door and the front triangle is under the front door.
There is a body seam about 4 inches inward from the triangle mark and there is a notch in the body seam for the jack. You place the jack under the body seam where the notch is and catch the seam with the groove in the jack seat. Then it is in proper position to jack up your car.
Remember to break the tension off of the lugnuts before you lift the car. Lift the car and proceed to undo the lugnuts with a minimum of shaking on your car. With a flat, jack the car higher than the rim on the ground so the inflated tire will fit back on the vehicle.
Mar 06, 2011 |
1998 Ford Crown Victoria