Question about Cars & Trucks
I have not replaced the fuel filters, Glow plug light works as expected.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: misses and lots of white
first question is it smoke or steam ? if if ligers in the air behind you as you drive with little dissipation or if its steam it will dissapear more quickly . either way , head gasket is first . once saw a car do that excessive engine oil put in by owner . giant flumes of white smoke . if you ever want a true smoke scren to get away then adding about 2 to 4 quarts of oil extra . man it is something to see
Posted on Aug 01, 2008
The check valve is a small brass fitting where the return line attaches to the filter head. I believe it takes a 7/16" wrench. There is a 'duck bill' inside that prevents fuel from leaking back to the tank causing air in the system. It should allow flow in only on direction. Some times you can see light through it if it's bad enough. Also, the lines between the injectors can dry out and start to leak air. Air will leak in before fuel leaks out, and you won't see it. There are plastic, cup-shaped connectors for these hoses that press onto the top of each injector. They are sealed by two o-rings on each injector body where it meets the connector. These o-rings can dry out and also leak air and fuel. Your Ford dealer or diesel service professional should have the proper o-rings. Any other o-rings might not seal, as they won't be the exact size. You already changed the fuel solenoid when you replaced the pump. It is inside. There has to be battery cranking voltage to it while cranking, and battery voltage with key in 'on' position. The wire attaches to the top of the pump. This is not likely to be the problem, since it restarts every 2 hours.
Posted on Jan 11, 2009
this is an oil pressure problem, either a sensor is not sensing enough oil pressure, or the high pressure pump is not building enough pressure(possibly leaking or head is leaking). this engine requires 450 psi minimum oil pressure at the injectors to actuate the injectors.
Posted on Apr 30, 2009
Tips for a great answer:
May 17, 2017 | Cars & Trucks
Mar 20, 2015 | Cars & Trucks
Nov 12, 2014 | Cars & Trucks
Jun 11, 2012 | Cars & Trucks
Jul 30, 2011 | 1991 GMC C1500
Oct 07, 2009 | Chevrolet Suburban 1500 Cars & Trucks
Mar 05, 2009 | 1998 GMC Sierra
16 people viewed this question
Usually answered in minutes!