Question about Dodge Cars & Trucks

1 Answer

My 2004 dodge cranks but won't start. and the RPM gauge doesn't move. I changed fuel pump and checked wire harness.

Posted by on

  • 1 more comment 
  • Gene May 12, 2017

    Hi Jabriel Fernandez, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? Is this a car or truck?

  • Jabriel Fernandez
    Jabriel Fernandez May 12, 2017

    2004 dodge intrepid 2.7L

  • johnny rebel May 12, 2017

    crank position sensor

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 604 Answers

Start your car with the key fob that came with the car,if you dont have one,call the dodge dealer,your anti theft security is on and needs the chip in the key fob to fix it.

Posted on May 12, 2017

Testimonial: "I don't have anti theft on the car"

  • 2 more comments 
  • Jabriel Fernandez
    Jabriel Fernandez May 12, 2017

    My car doesn't have anti theft

  • johnny rebel May 12, 2017

    call your dealer if the crank position sensor is bad

  • Jabriel Fernandez
    Jabriel Fernandez May 12, 2017

    How can I test the crank position sensor?

  • johnny rebel May 13, 2017

    call dealer

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 75 Answers

SOURCE: New fuel pump now gas gauge does not work

remove the pump from the tank and your float should be going the sam direction as the tank not cross ways in the tank this will fix fuel guage

Posted on Aug 18, 2009

Testimonial: "Dude Thanks so much for your reply. I dropped the tank this weekend and there it was facing the wrong direction. Thanks for taking the time to respond"

  • 1 Answer

SOURCE: speedometer, gas gauge, odometer, rpm gauge not working

My gas guage, speed odometer and tempiture does not work
The speed odometre is reading 9999999 what should i do

Posted on Oct 21, 2009

lindsay836
  • 677 Answers

SOURCE: 2004 Ford 6.0 will crank but won't start.

These 6.0 diesels had bad injectors to start with, so I would definently have those checked, how many miles do you have on it ?

Posted on Feb 04, 2010

  • 635 Answers

SOURCE: 2006 dodge grand caravan-car won;t start.

Test at the spark plug if you are getting current there with a cheap spark plug tester, if not, it could be the spark box. ( it used to be an ignition coil on older cars ) double check the computer for codes which may lead to a cam sensor not giving the PCM information.

Posted on Mar 30, 2010

  • 594 Answers

SOURCE: THE FUEL GAUGE STAYS PAST FULL DOESN'T MOVE

USSUALLY WHEN GAGE GOES WAY OVERFULL IT'S A BAD GROUND
QUICK CHECK USE BOOSTER CABLE ONE END ON TANK OTHER END ON BATTERY NEGATIVE IF GAGE GOES OK MAKE UP SHORT WIRE FROM FRAME TO TANK SEEM LIP
AND ATTACH MAKE SURE METAL IS CLEAN

Posted on Apr 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Nissan Sentra SE-R Cranks but won't start!


It could be the fuel system.
It could either flooding or starving for fuel.
If injectors are fouled badly it will wet the plugs and not fire.
If plugs are pitted that makes it easier to flood. (check plug tip condition, check all plug wires and boots are good)

If it is starving -- fuel pump weak (going to fail).
Need to test fuel pump pressure.

Feb 17, 2015 | Nissan Cars & Trucks

1 Answer

03 dodge ram 1500 crew cab 4.7l v8 starts fine when cold but won't start after it is warm


First i would check the crank sensor by looking for rpm's on the tachometer or scan tool if you see any rpm's then crank sensor is good.Then check for leaking injectors and if they are not leaking then you will need to check the ECM it may have failed.

Oct 17, 2012 | Cars & Trucks

1 Answer

2000 Dodge neon starts and runs fine. But sometimes does want to start Engine cranks, but won't start


How many miles on the car? Have you checked the fuel pressure when it doesn't want to start? Do that first and then move on from there. To quickly test fuel pressure with no special equip get a can of starting fluid from the auto parts store, when it fails to start spray the fluid into the air intake of the engine well it is cranking, if it fires up then the fuel pump is likely not running on for some reason. This can be electrical in nature or just a failed electric fuel pump

Aug 07, 2012 | Toyota Camry Cars & Trucks

1 Answer

My aunts 1997 Jimmy was towed to my Dads .Cranks but no start,after batt. charged. They had been hitting bottom of fuel tank,and would start.But not anymore . Dad replaced pump.Had to rewire connectors for...


I would recommend checking the "re-wire job and make sure it is done correctly. Many GMs have had problems with the connectors at the fuel pumps. The fuel pump manufacturers have re-designed the connector to correct the problems they have been having. This is WHY the re-wire is required. The fuel pump kits usually come with the new connector to complete the job. However, some of the kits have wire colors that do not match the wire colors on the vehicle harness, Some of them also have "duplicate" colors, like two black wires. One will be a larger gauge than the other one. I had a couple where the white wire on the new connector had to be wired to the purple wire on the vehicle harness, etc. If your dad did not follow the directions EXACTLY then this could be the cause of your problem. (The pump MAY be running backwards)

Aug 03, 2011 | 1997 GMC Jimmy

3 Answers

2004 z71 tahoe when the gas gauge is at a quarter of a tank it won't crank. It acts like it is empty with gas.


Check your fuel filter if it needs replacement. Empty it out then connect it back. Try to start it again. Inspect the fuel filter if it filled with gasoline. Check if there is noise at the fuel tank to check if the pump is working. If it did not, inspect the fuse for your fuel pump and the relay. If both are good you may connect the fuel pump directly to the battery to see if it works. It may be a bad wiring.

May 08, 2011 | 2004 Chevrolet Tahoe

1 Answer

Bad wiring to fuel pump


don't know how you came to this conclusion but your fuel pump harness has four wires two for the gauge and two for the pump, if you dont know what they are you go over to a auto parts place have them show you one and look at the harness to see which go to the pump now go test the pump on your truck remember when you turn the key you will only recieve power to fuel pump for a few seconds to prime the fuel line after which once it starts the computer cintrols the rest. you might have a bad crank sensor causing it to not start.

May 18, 2010 | 1994 Dodge Ram 2500

1 Answer

My 2002 sedona xl will not supply gas to the engine is it the filter or the pump.the pump does not seem to run when ignition is on. Where is the pump or filter located and how repaired. Cy


If your sure its a fueling issue I would go to the wires that go to the fuel pump and check for power and ground. When the key is turned on the pump will run for about three seconds if you do not start the engine. If nothing happens then try cranking the engine and see if you have power. If you have power you will need a fuel pump. The pump is most likely in the fuel tank as is the filter. If you do not have power at the wires the you have a blown fuse of broken wire somewhere. Be aware the fuel pump is computer controlled and if the crank sensor is bad the fuel pump will not turn on. Easiest way to check for a bad crank sensor is crank the engine and check for a RPM signal. If you have a RPM gauge on the dash most of the time you cannot crank fast enough to get it ti move. Checking the RPM may need a timing light. Also a timing light will blink if the crank sensor is ok. If you have no RPM signal you most likely dont have fuel or spark., Easiest way to check for if you only have a fueling issue is spray a little brake clean into the throttle body. If it starts and stays running while adding very little spray of brake clean then you know its just a fuel issue. Also if the timing belt has stretched or jumped teeth this would cause a no start.

Jul 14, 2009 | 2002 Kia Sedona

4 Answers

2004 dodge ram 2500 5.9 diesel hard to start


The lift pump is bad Check the fuel pressure with a test gauge.

Jan 04, 2009 | 2004 Dodge Ram 2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...