Question about Mazda Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sounds like a wheel bearing maybe faulty from your text it sounds like it could be the osf you could try jacking vehicle up with engine off handbrake applied and in neutral spin the wheel and see if it makes noise or wiggle it to see if it has any play possibly take off greade cap and see if any grease in bearing /
Posted on Aug 20, 2009
if you have the regular headlights(not the HID) there is a TSB for that at the dealer and they will fix it for free as long as you are under the 36000 miles,,anyhow to get the headlight out you need to remove the front bumper cover,,pop the hood, remove all the pushpin that hold the plastic panel on near the front area then remove the plastic cover,,,,,then there are some phillips head screws along the front of the top of the bumper cover take these out,,,,now remove both front wheels,,remove the bolts that hold the inner fender liners inplace there are some in front and under the lower bumper cover take these out too,,,,then under the front bumper cover at about the middle there will be 2 bolts i think 10mm remove theses to,,,,now where the side of the bumper cover meets the fender inside there are 3 bolts on each side remove these i think they are 7 or 8mm and then pull the bumper cover off,,,if you have fog lights disconnect the plugs,,then you will see all the bolts holding the headlight in take them out and then it comes out,,,,i know its alot of work just for a headlight ,,,,
Posted on Oct 26, 2009
Buick says that the front bumper has to be removed in order to remove the headlight assembly. Crazy, I know.. I found that you can remove the air filter box on the drivers side and squeeze your hand in a small hole to replace that bulb. The passanger side is nearly impossible. You can remove to nuts holding the fuse block in place and move it over a little and squeeze your hand in a little hole and reach it. Plan on two to three hours to change one bulb.
Posted on Jan 12, 2010
There is a little aluminum stick in the assembly holding it in. On the top of the headlight twist the stick and remove it. It will look like a tent stake. Remove this stick and then the head light assembly will almost fall out.
Posted on Apr 28, 2010
Tips for a great answer:
Oct 31, 2015 | 2008 Mazda Cx 9
Dec 07, 2014 | 2008 Mazda Tribute
Aug 20, 2010 | 2008 Mazda MAZDASPEED3
Jun 23, 2010 | 2002 Mazda Tribute
Jun 17, 2010 | 2001 Mazda Tribute
May 22, 2010 | 2008 Mazda Tribute
Apr 16, 2010 | 2008 Mazda Mazda3 Hatchback
Aug 30, 2009 | 2008 Mazda Tribute Hybrid
15 people viewed this question
Usually answered in minutes!