Question about Cars & Trucks

Open Question

Changing alternator in my 2006 300 - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset warning after changing regulator and rectifier on Lexus 2008 GS300 alternator


Need to check the schematic to see just what it is that triggers that light to go on - maybe stuck relay. Till you find it I would just disconnect it. Your charging voltage looks good.

Mar 18, 2016 | Lexus Cars & Trucks

1 Answer

Help changing alternator on 1998 honda civic. how do you remove the belt or is there a belt?


The alternator has a bolt that is adjustable to keep tension on the belt. There should be a single bolt that is fixed, and probably another that sits in a slot in the bracket that allows adjustment. You'll loosen the bolt in the bracket slot and give the belt some slack, and it should come off the pulley. When replacing, you may have to have someone help pull the alternator so it puts tension on the belt, and then you can tighten it down. I have seen some vehicles that have a bolt that will turn in or out to either tighten the alternator or loosen it.

Mar 22, 2014 | 1998 Honda Civic

1 Answer

Can the regulator be changed without changing the alternator


Depends on the year make and model.
GM cars used an alternator with a built-in voltage regulator since the mid 1970s.

Feb 21, 2013 | Cadillac DeVille Cars & Trucks

1 Answer

I am changing to alternator belt on a 1983 mercedes 300d


undo the bolts that hold the alternator on its bracket there stoping you pulling the alternator off the belt
when you have the new belt on pull belt tight and nip up all the bolts again

Mar 14, 2010 | 1983 Mercedes-Benz 300-Class

1 Answer

Looking for an overview of changing power steering belt


Remove the 14mm bolt securing the alternator tensioner to the alternator. Then take the tensioner off and use a prybar to slide the alternator back enough to take off the belt. Then loosen the 14mm p/s tensioer bolt. slide the pump back and change the belt.

Installation is the reverse of removal.

Good luck.

Nov 24, 2009 | 2002 Hyundai Accent

1 Answer

I am changing the alternator in a 1998 dodge neon, need diagram


No diagram...
The pivot bolt is the long bolt that holds the alternator to the frame.
If you loosen it, the alternator can "swing" with the pivot bolt as its .... well, pivot, or swing center.

The long bolt must be removed completely in order to remove the alternator.

Be sure to doisconnect the negative cable from your battery.

Hope this hleps w/o a diagram.

Sep 14, 2009 | 1998 Dodge Neon

1 Answer

Changing the alternator belt


Google "changing alternator belt on 2000 Camry" and I think you will find what you need.

Mar 28, 2009 | 2000 Toyota Camry

2 Answers

Battery won't stay charged.


It sounds like either the alternator is bad, or you need to replace the battery...you can have both checked at Autozone for free..............

Jan 31, 2009 | 1990 Toyota 4Runner

1 Answer

Changing the alternator


By unscrewing the bolts off and push alternator down to take the belt off so you can pull out the alternator.



good luck

Nov 03, 2008 | 2002 Mitsubishi Montero

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...