Question about Cars & Trucks

Open Question

Will not move in drive or reverse. Grinding coming from front left tire

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 60 Answers

SOURCE: Squeaky sound front left tire and 4Wheel Drive will not turn on

the squeak could be brakes or wheel hub/bearing. most likely it is the bearing and hub assembly, i would not drive it , take it to you local service station and have then replace or repair the hub assy.

Posted on Nov 22, 2008

dennymulford
  • 1055 Answers

SOURCE: in 4 wheel drive front wheels wobble bad

i had the same problem,i endend up changing the hub bearings and ball joints and front u joints the main problem was the hub bearings

Posted on Feb 24, 2009

shop242
  • 214 Answers

SOURCE: grinding rubbing noice turning right

If you have stock sized tires on it.. check the brakes.. also look for loose fender skirting near the wheel as a helper turns the wheel maxxed out to the right.. Lemmie know, Thanx

Posted on Mar 11, 2009

  • 51 Answers

SOURCE: grinding coming from the left front tire area

it sounds like a wheel bearing. if its grinding jack up the front end and see if the wheel is loose and also leave the car in nutral and hold the coil spring on the strut and spin the wheel if that bearing is bad you will feel the roughness in the spring. on a hyundai i would recomend checking all four wheels because this is a common problem.

Posted on Mar 16, 2009

  • 91 Answers

SOURCE: 2003 BMW 325i, Metal-on-metal grinding left turn only

This sounds like a wheel bering. If you turn left on a bad passengerside bering it growls louder because more pressure is shifted onto it.

Posted on Mar 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2000 ford expedition 4x4 the front right side makes a clicking noise while driving. Any ideas


Clicking Noise From Left Front Tire Area - F150online Forums

www.f150online.com/.../47713-clicking-noise-left-front-tire-area.html
Aug 11, 2001 - I have a clicking type noise comming from the left front tire. It does not ... I can really hear it when I'm driving beside a sound wall or the side of a building. ... the sound. (Yeah right!) ... Almost forgot: 1999 Ford F150 XLT Supercab 5.4 4X4. ... My 2000 4X4 had a ting ting noise coming from the left front wheel. Intermitent Grinding Noise on 2004 F150 4x4 - Page 5
Jan 15, 2010
Popping noise in front end.
Oct 26, 2009
Clicking noise at low speeds.
Aug 7, 2009
Annoying clicking sound in rear of truck?!?!
Jun 8, 2009
More results from www.f150online.com

Jan 05, 2016 | Ford Cars & Trucks

1 Answer

Grinding noise when in gear


Sad to say but you will be needing to get a new transmission ..

Sep 17, 2015 | 2004 Chrysler Town & Country

1 Answer

Noise from right front tire


jack up front left on level ground ,support and chock rear wheels and set park brake ---look and check the cv axle for leaks,tears or damage -put in neutral and watch axle should turn smoothly turn steering wheel to left and rotate tire again watching axle if their is binding or grinding or studder movement than axle is damaged and needs to be replaced

Apr 08, 2014 | 2005 Ford Freestar

1 Answer

Transmission


Your problem is a bad CV axle and outer carrier bearing failure. The grinding is coming from brake rotor on that side due to the bearing failure. the brake rotor and bearing is causing the lock down. Do not attempt to drive or further damage will occur. Transmission is probably OK. Replace both sides (CV axels and Carrier bearings, 150,000 is time) Check brake components for damage and replace pads while you are there.

May 20, 2017 | Hyundai XG350 Cars & Trucks

1 Answer

Thumping, grinding noise comes from right front side


most likely a front hub [wheel bearing ]going bad but jack up front side that is causing problem and try to move tire in and out with hands at top and bottom of tire and listen and feel for noise or excess movement it to much movement remove tire an check the upper and lower ball joints as well as the shock/strut but check brakes grinding can also mean pads are metal to rotor but usually grinding and thumping is related to a bad hub

Mar 31, 2013 | 2005 Chevrolet Cavalier

1 Answer

Front driverside tire hesitates when the vehicle starts moving


Sounds like you have a bad wheel bearing. These cars are known for that. It could also be a bad CV joint [axle] , but it won't usually make your wheel hop. Jack car up and try to move wheel top to bottom. There should be no play at all. Try spinning the wheel while it is off the ground, if it's a bearing, you will hear a grinding noise. If it's a bad CV joint, you will hear a clicking. Let me know if this was helpful to you, and until you get it looked at, I wouldn't drive it, as the wheel can fall right off if it's a bearing. Good luck

Jan 04, 2013 | 1997 Chevrolet Cavalier

1 Answer

I had a constant grinding coming from front passenger tire. Replaced Caliper and put the worn pads back on for a day, the constant grinding went away. It would still grind while braking,hitting a bump


It sounds like the brake pads are metal to metal, when you turn the flexing of the wheel makes them touch the rotor and grind. This can rarely be caused by a badly worn wheel bearing as well, have both brakes and wheel bearing inspected.

Mar 02, 2017 | 1999 Pontiac Grand Am GT

1 Answer

2000 Chevy Blazer 4x4...started making a horrible loud noise after my cruise control went out. I have recently replaced my hub and the brake pads and the CV axle. The noise comes and goes and only happens...


does it get louder above 45-60mph? and much quieter at low speeds. It could be wheel bearings, a rear differential or front differential. If its a grinding humming noise its wheel bearings, listenin to see if theyre coming from the front or rear, left or right, or both when your driving to know what wheel bearing are bad. If its a whinning noise, its probably a differential. check and listen to hear if its coming from the front or rear. Also, check for loose plastic around the wheels. Lastly check your tires for uneven or choppy wear. move your hands front to back on the top of the tire. does it feel really choppy and rough, maybe you just need new tires

May 04, 2011 | 2000 Chevrolet Blazer

1 Answer

Front end noise when turning. almost sounds like


There are a couple of things to cause metallic sounds when turning. First thing, is if it's a clicking sound when you turn, then you have a cv joint going bad. It's usually more prominent when moving in reverse, however it can happen just as well while moving forewards. Secondly, if it's more of a grinding or scraping noise, we have a couple of options. The sound could be coming from the brakes, if they're worn or have grit stuck in them, or it could be bad bearings in the front wheel hub. The wheel hub has a tendency to making a whining noise when driving; usually most easily heard when driving past buildings. They can also allow the tire/wheel to present the appearance of leaning when looking at it. If bad enough, it can even rub on the brake caliper, or cause the disc brake rotor to wear out the brake pads prematurely. So, to recap: Check:
CV joints, if a clicking sound brakes or wheel hub bearings if grinding or whining sound.

Oct 19, 2009 | 2000 Jeep Cherokee

1 Answer

Front grinding/rubbing sound when accelerating


if you slide under the truck and try moving the cv with your hands and there is any looseness in joint or noise the joint is indeed worn out, the cv joint if bad should not stop the truck from shifting into 4 wheel drive it could be stuck in 4wd and this would cause cv joints to break, if u have access to lift get all tires in air and try2 vs 4 drive and see if tires turn if not lift front tires off ground tires should turn freelyin 2wd, as u turn tires listen to wheel bearing and shaft noises for grinding clunking indicating bad parts, simple tricks that may help u find problems for cheap good luck!!

Jul 09, 2009 | 2005 Ford F-150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...