Question about Nissan Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
2000 maxima is filled with R134, not freon. You don't need retro fit kit. Get couple of cans of R134 and pump it into the low side valve /small fiting, while A/C compressor is engaged. If your compressor is not coming on, jump the low side pressure switch to make the compressor come on and than the R134 will get sucked in to your system through the low side line. The proper way to do this is to put a/c system under vaccum for 15 minutes at least and watch for leak/gauges coming/loosing vaccum. Than pump R134 into the HIGH side valve with engine OFF.
Posted on Jul 17, 2008
SOURCE: 2004 Nissan Maxima
it is a cable that links you transmision to the dashboard
i am not sure what the name of the cable is
but if you hold the start position and switch the gears to neutral it will start.
Posted on Oct 24, 2008
jorgeva: on the driver's side to gain access, you must remove the air cleaner assembly. At that point, you can see the back of the light which has a plastic cap. Rotate this "counter clockwise" and you can pull it back from the back of the lamp housing. From there you will see how the bulb it self is plugged in, which is obvious. Unplug it. There is a "spring "like latch retainer to hold the bulb in place. Unlatch it, remove the bulb and install the new bulb.
CAUTION!!!!!!! DO NOT TOUCH THE GLASS AREA OF THE NEW BULB! Only handle the rear section. Reassemble in the reverse order.
The right side will require the removal of the windshield washer tank.
I trust this will have answered your question. If you would, let me or FIXYA know if I have solved your problem......
Posted on Apr 18, 2009
600 CCA and get a side terminal mount if possible and change out the lines if sold at napa. do not crimp your own connections on.
Posted on Jul 29, 2010
SOURCE: How do you bleed the
To bleed the power steering system on your 2004 Nissan Maxima, fill the power steering fluid reservoir to the cold mark. Turn the ignition to the "ON" position. Repeatedly turn the wheels to the left and then to the right, hitting the furthest left and right positions. This process will bleed out any air that has entered the power steering system so that it works consistently. Continue to check the level of the power steering fluid while the engine is hot until the fluid is all gone.
Posted on Dec 24, 2010
Tips for a great answer:
May 12, 2017 | Nissan Cars & Trucks
Oct 18, 2014 | 2006 Nissan Maxima
Dec 04, 2013 | 2004 Nissan Maxima
Oct 28, 2011 | 2004 Nissan Maxima
Jun 05, 2011 | 2004 Nissan Maxima
Dec 01, 2010 | 2004 Nissan Maxima
Jun 18, 2010 | 1990 Nissan Maxima
Mar 15, 2009 | 2004 Nissan Maxima
Jun 18, 2008 | 2004 Nissan Maxima
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: