Question about Cars & Trucks

Open Question

We have a fairly new biosonic uc300 that is not vibrating. SN# 160506541

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Engine vibration

This is common on Hondas. If you want the vibration to go away you can adjust the idle to be higher. That's a fairly common fix. There's not really anything wrong though as long as it's not missing. Every engine has a speed it likes to vibrate at depending on how it was designed/built.

Feb 06, 2016 | Honda Cars & Trucks

1 Answer

Vibrates when hard braking

Sounds like your front brake rotors are warped. You will either need to have them turned back straight on a brake lathe or have them replaced.

Sep 03, 2015 | 2003 Honda Odyssey

1 Answer

Vibration in braking system on 530d checked out all good discs and pads replaced. DSC light coming on is this the problem?

generally vibration in the brakes is cause by warped rotors. The cause of warped rotors could be over tightening the lugnuts, or excess heat due to a currently stuck or previously stuck caliper.

Vibration can also be noted in the brakes due to faulty tie rod ends, ball joints and wheel bearings/hubs. Tires can also cause a vibration in the brakes, but normally you will feel it more when driving at certain speeds.

Finally in some unusual cases vibrations while braking have been traced back to the transmission and it's related components. This is fairly uncommon though.

Nov 09, 2012 | BMW Cars & Trucks

1 Answer

When I brake going downhill on the freeway, the car seems to vibrate including the steering wheel. Is this traction control problem?

nope,the rotors are in need of service.They get a thickness
variation from getting hot and cooling. New ones are fairly
cheap but they don't last. I would suggest finding a shop that
has a brake lathe and get them resurfaced for maybe 20 bucks

Aug 26, 2012 | 2000 Mazda Millenia

1 Answer

Vibrations, tranny slipping, and engine tick

Sounds like you may have a worn out CV joint and the clicking may stop with an oil change. Good Luck

Jun 21, 2009 | 2003 BMW 325

1 Answer

S2000 vibration when decelerating

Clutch would show different ugly symptoms - it is definately a warped/warn rotor and/or brake pads from high speed deceleration or "riding the brakes".

Fairly easy to fix, probably 2-3 hours of work for each corner

Apr 03, 2009 | 2004 Honda S2000

1 Answer

Engine vibrates at idle speed, has been involved in a front in crash, I have looked for vac leaks but found none yet.

I had the same problem and the vibration caused the clamp on my A/C to wear a hole in it. Replaced all four mounts will cost about $375 but well worth it and fairly easy to change. You will start loving your Rolla like it was new again.

Apr 03, 2009 | 2000 Toyota Corolla

1 Answer

2005 trailblazer fan motor vibrates whole dash

It is very likely that there is something in the squirrel cage fan blower wheel. It is fairly easy to pull it out and check.

Oct 15, 2008 | 2005 Chevrolet Trailblazer Ext

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14403 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides