Question about Cars & Trucks

Open Question

Oem propreller for 1989 proline 25' walk around boat with 5.7 260 hp alpha one outdrive

Need propeller diameter and pitch

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6982 Answers

SOURCE: vibrations after propeller strike ???

chances are the prop has an unbalance condition...You can also check it for excessive runnout by simply referencing it against something and turning it. all blades should remain at the same distance from reference point as you turn it. You can do this to check the shaft as well.

Posted on Jun 07, 2009

  • 18 Answers

SOURCE: Boat outboard outdrive power lift only goes 1/3 way up then stops

There is a 'trailer' or some such labeled switch (usually on the side of the throttle) which you need to push in order for the motor to go all the way up. It stops at 1/3 because it thinks it's in the water. If you push that switch with no better result, then a related wire may be broken or disconnected.

Posted on Jun 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IACV screw came out. What can I do to fix this?


no photo , no joy.
which screw, a mounting screw, some have mounts and calibr. screws.
the mount ? remove the other screw, go to any hardware store or auto store and match it, hint its metric. as them for help.
diameter and pitch and lenght must match.
or any toy dealer. show screw, he matches it.

Dec 27, 2013 | 1989 Toyota Pickup SR5

1 Answer

Engine block numbers


SR = engine code
20 = 2.0 liters
Nissan motor made by "bullet", very high performance race engine, some producing over 1500 hp!!!!! Worth about $8500 (thats dollars) here is a sr block:f317699f-3f13-4aff-bfc7-d3d453d10c26.jpg
The Nissan SR engine is a 1.6 L, 1.8 L, or 2.0 L, straight-44-stroke internal combustion gasoline engine manufactured by Nissan Motors. It features an aluminum head and aluminum block with steel sleeves in selected models and features a DOHC 4-valve design, with variable valve timing on select models. The engine was used in many small to medium Nissan vehicles, including high-performance turbocharged variants. It was designed by Nissan as a replacement for the earlier CA series of engines.

The Nissan SR20DE engine was used in over 15 Nissan models. It first appeared in October 1989, and over time it was gradually phased out with the introduction of the QR (low-emissions) engine family. The SR20DE carried nominal power ratings between 130 to 169 Horsepower (96 to 126 kW) from the factory.
The breakdown of the engine code is as follows:
  • SR - Engine Code
  • 20 - 2.0 Litres
  • D - Dual Overhead Cam
  • E - Multi-port Fuel Injection

This engine has the following specifications (SAE, 1991)
The Specs Type: Water cooled, 4 cycle in-line 4 cylinder Combustion Chamber: Cross flow, pentroof type Valve mechanism: DOHC, 4 valves per cylinder, chain drive Displacement: 1998cc Bore x Stroke: 86.0 x 86.0mm Bore Pitch: 97.0mm Block Height: 211.3mm Compression ratio: Crankshaft journal diameter: 55.0mm Crankpin diameter: 48.0mm Con rod length: 136.3mm Valve diameters: Intake: 34.0mm, Exhaust: 30.0mm Dimensions: 685 x 610 x 615mm Maximum power: 140 hp-169 hp at 6400 rpm (SAE net) Maximum torque: 132 lb·ft at 4800 rpm (SAE net) It was used in the following vehicles:
Model
180SX 200SX SE-R Almera Avenir Bluebird Liberty Infiniti G20 NX2000 Prairie Joy Presea Primera Pulsar R'nessa Rasheen Sentra Serena Silvia Wingroad

Dec 04, 2013 | Nissan Cars & Trucks

1 Answer

Proxxon micromot spare collet set


metric pitch is in 3 types
1 , 1.5 ,1.75 so you will be looking at 1.75 for the pitch so it will be 8mm X 1.75
what do you call the stem diameter
is that the hole in the collets or the shaft diameter that the collets are fitted in under the nut

May 17, 2017 | Cars & Trucks

1 Answer

The camshaft seal from dealership is too small in diameter, allowing oil to sling out around the outside groove. The seal is "OEM". It is the 2.5 four cylinder, 1989 Dodge Spirit. Aftermarket...


May have to add some blue rtv to the seal, allowing to dry before assembling, but this seal, depending on whether metal rotates or moves around it, may need to have the adjacent parts replaced with new metal parts to make the oem or aftermarket seal work right.

Unfortunately, the metal may have a defect in it causing the camshaft seal to leak.

Good luck on this repair.

Oct 28, 2010 | 1989 Dodge Spirit

1 Answer

Chriscraft w/ Mercruiser I/O wont raise completely


there is an up and down button and then a seperate trailer button to raise it further. it uses the same system to continue to raise it so you may have an issue with the trailer button.

Jun 24, 2009 | 2008 Mercury Mariner

1 Answer

Vibrations after propeller strike ???


chances are the prop has an unbalance condition...You can also check it for excessive runnout by simply referencing it against something and turning it. all blades should remain at the same distance from reference point as you turn it. You can do this to check the shaft as well.

Jun 07, 2009 | 1994 Mercury Capri

3 Answers

Boat outboard outdrive power lift only goes 1/3 way up then stops


There is a 'trailer' or some such labeled switch (usually on the side of the throttle) which you need to push in order for the motor to go all the way up. It stops at 1/3 because it thinks it's in the water. If you push that switch with no better result, then a related wire may be broken or disconnected.

Apr 19, 2009 | 2008 Mercury Mariner

1 Answer

Boat not responsive


hi, thats a little motor for a big boat. how big is the boat? you can try changing the timing by loosening the distributor cap and turning it slightly to see if that helps or you can get a different prop that has less pitch on the blades which will spin the prop faster in the water and keep you up in powerband better. maybe call a marine boat shop and tell them your problem, maybe they have a trick or two. happy boating J

Aug 15, 2008 | 1989 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...