Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: rear suspension
Your problem is that you need to trade off the freestar and get yourself a cargo van. The Freestars use struts for their smoother ride (so Ford claims). Basically the Freestar suspention is the same as is used on small cars. It will never be able to carry the load your talking about.
Posted on Jun 08, 2009
IF THE AXEL IS THE TYPE THAT HAS THE BAR GOING RIGHT THROUGH FROM SIDE TO SIDE THEN YOU WILL HAVE TO BUY A COMPLETE UNIT.
Posted on Jun 23, 2012
Testimonial: "seems like I need to replace the axle or add leaf springs "
Tips for a great answer:
Nov 15, 2015 | Ford Cars & Trucks
Jun 21, 2012 | Cars & Trucks
Lexus Car ES, IS, LS 1998-06
Coil Spring Rear Suspension
Fig. Checking wheel bearings for excessive play
NOTE The rear wheel bearings are non-adjustable. If the wheel bearing is out of specifications, replace the wheel bearing.
Removal & Installation
Fig. Removing the oil seal (inner)-LS 430
Fig. Removing the oil seal (outer)-LS 430
Snapring from inside the axle housing Bearing from the axle housing
Fig. Installing the oil seal (outer)-LS 430
Backing plate to the axle housing. Do NOT install the bolts or nuts at this time. Inner race (inside) to the axle housing Axle hub to the axle housing Backing plate in position. Tighten the bolts and nuts to 43 ft. lbs. (59 Nm). New oil seal (inner) to the axle housing. Coat the oil seal lip with multipurpose grease.
Fig. Installing the oil seal (inner)-LS 430
New dust deflector. Be sure to align the hose for the ABS speed sensor in the dust deflector and axle carrier. Upper control arm to the axle carrier by installing the nut. Tighten the nut to 80 ft. lbs. (108 Nm). Axle carrier and upper control arm to the vehicle as an assembly 2 upper control arm set bolts and tighten the bolts to 121 ft. lbs. (164 Nm) Bolt and nut holding the strut to the axle carrier. Tighten to 101 ft. lbs. (137 Nm). Bolt and nut connecting the No. 2 lower control arm to the axle carrier. Tighten the bolt to 60 ft. lbs. (81 Nm). Nut and adjusting cam to hold the No. 2 lower control arm to the body. Align the adjusting cam marks and tighten the nut to 57 ft. lbs. (78 Nm). Stabilizer bar link to the No. 2 lower control arm and tighten the nut to 48 ft. lbs. (65 Nm) No. 1 lower control arm to the axle carrier and body. Install the nut to hold the No. 1 lower control arm to the axle carrier. Tighten the nut to 43 ft. lbs. (59 Nm). Nut and adjusting cam to hold the No. 1 lower control arm to the body. Align the matchmarks and tighten the nut to 57 ft. lbs. (78 Nm). Strut rod to the axle carrier and body. Install the bolt and nut to hold the strut rod to the body. Tighten to 57 ft. lbs. (78 Nm). Bolt and nut to hold the strut rod to the axle carrier. Tighten to 136 ft. lbs. (184 Nm) Parking brake shoes and cable Outboard joint side of the halfshaft and align the matchmarks on the side gear shaft and the halfshaft. Coat the threads with clean oil and install the hexagon bolts. Tighten bolts to 61 ft. lbs. (83 Nm). Suspension member brace with the 2 bolts. Tighten the 2 bolts to 37 ft. lbs. (50 Nm). Nut to hold the halfshaft to the rear axle. Tighten the nut to 213 ft. lbs. (289 Nm). Lock cap and cotter pin Brake disc to the axle hub with the matchmarks aligned. Install the 2 screws and tighten the screws to 48 inch lbs. (5 Nm). Brake caliper to the vehicle and install the 2 bolts. Tighten the bolts to 77 ft. lbs. (104 Nm). ABS speed sensor and wiring harness Height control sensor link with the matchmarks aligned. Tighten the nut to 48 inch lbs. (5 Nm). Rear wheel(s) Negative battery cable
Fig. Exploded view rear carrier assembly, hub and bearing-
Fig. Exploded view rear Axle carrier and hub assembly-ES 330
Removal & Installation
Strut & Coil Spring
Removal & Installation
Dec 26, 2011 | 1999 Lexus ES 300
Aug 05, 2011 | 1989 Chevrolet Astro Cargo
Jan 22, 2011 | 1999 Ford Econoline
Oct 15, 2010 | 2002 Mercury Mountaineer
May 21, 2010 | Cars & Trucks
Sep 29, 2009 | 2001 Dodge Neon
Apr 06, 2009 | 2005 Ford Freestar
Dec 30, 2008 | 1995 Ford Taurus
Nov 22, 2017 | Mazda Cars & Trucks
26 people viewed this question
Usually answered in minutes!