Question about Cars & Trucks

Open Question

2FMDK4KCSDBA52489 i need factory door code for that car

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where do I find the code on my car


Factory Code was on a plastic card when new

To get that ,you need to give a dealer your Vin #
& proof of ownership.

I don't know if you can over ride your code with the
factory code

I have changed codes ,but not tried to enter the factory
one over mine

You vehicle comes with 2 keys & a valet key & you should have
a 3rd key bought & you program it.

What about the remote KeyFOB You should have 2 of those
to open the door

No reason to only have one key

Also the ignition is programmed for 2 keys or
it won't start

Nov 22, 2012 | 1999 Mercury Mountaineer

1 Answer

Code change on a 1996 Mercury Grand marquis


Sorry,but the factory code always works.Ford may be able to change it,though. don-ohio

Dec 27, 2011 | 1996 Mercury Grand Marquis

1 Answer

How do I find the acess code to the door? Theres like 6 numbers on the drivers door. Isnt the code located somewhere on the car?


Look for a sticker inside the trunk lid. Look for a note in the owner's manual. last resort ($$) go to dealer and have them look up the factory code. You can also add your own, easy to remember, code like your zip code, in addition to the factory code, but you will need the factory code to set your own.

Sep 11, 2011 | 1994 Mercury Grand Marquis

1 Answer

Just purchased a 2003 mountaineer from a used car dealer and they don't have the manual and the alarm doesn't work. How do I get the factory entry code?


the keyless entry code is on the module and in the module memory. A dealer can extract the code ( about $50). You can access the owner manual on line at motorcraft.com, pro center, tech info, owner manual. I have one for $7 plus postage. let me know. Also, look for a plastic credit card in teh glove box with the code on it. The module should be under the dash, driver side I think.


Programming/Erasing Personal Code
A unique personal five-digit code can be programmed by following these steps:
  1. Enter the factory set five-digit code (the keypad will illuminate when pressed).
  1. Press 1/2 within five seconds of Step 1.
  1. Enter the unique five-digit code.
The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it overwrites the previous personal code. To erase a personal code, carry out the following procedure:
  1. Enter factory set five-digit code.
  1. Press 1/2 within five seconds of Step 1.
  1. Press 7/8 and 9/0 at the same time within five seconds of Step 2.
The system now responds only to the factory set code.
Anti-Scan Feature
To provide added security, the keyless entry pad is disabled for one minute after 35 button presses without a valid entry code being entered. The keypad flashes during this one-minute mode with all functionality disabled except for 7/8 and 9/0 still being allowed to lock the vehicle.
Anti-Scan will be turned off after one minute of keypad inactivity.
Unlocking the Doors and Liftgate with the Keyless Entry Keypad System
To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will illuminate.
To unlock all doors, enter either the factory set code or the personal code (driver door unlocks) and press the 3/4 control within five seconds.
To open the liftgate window glass, enter the factory set code or the personal code (driver door unlocks) and press the 5/6 control within five seconds.
Locking the Doors with the Keyless Entry Keypad System
It is not necessary to enter the factory set or personal code prior to locking all doors. To lock all doors, press the 7/8 and 9/0 controls at the same time

Dec 21, 2010 | 2003 Mercury Mountaineer

1 Answer

I just bought a 2002 explorer and need the factory door codes so i can program the locks


you need to bring the car to any ford dealer and hook up the diagnostic computer to retrieve the original door code so u can program your desired combination.you cant erase the original factory code but you can add you own only.

Jan 31, 2010 | 2002 Ford Explorer

1 Answer

Factory code for 2006 exploer keyless door pad


if factory installed. take your title to show that you own the car to a ford dealership and they will contact ford to get the code. they will not give out the code unless you own the car.

Jun 10, 2009 | 2005 Ford Explorer

1 Answer

HOW TO OPEN THE DOOR USING THE NUMBER PAD ON THE DOOR


this from the owners manual
Programming your own personal entry code
To program your own code:
1. Enter factory set code (keypad will illuminate when pressed).
2. Press 1/2 control within five
seconds of step 1.
3. Enter your personal 5 digit code.
Enter each digit within five seconds
of previous one.
Do not set a code that includes five
of the same number or presents
them in sequential order. Thieves
can easily figure out these types of codes.
Your personal code does not replace the permanent code that the
dealership gave you. You can use either code to unlock your vehicle. If a
second personal code is entered, the module will erase it in favor of the
new code.
If you wish to erase your personal code, use the following instructions:
1. Enter factory set code.
1 2 3 4 5 6 7 8 9 0
Controls and features
90
2. Press 1/2 control within five
seconds of step one.
3. Press 7/8 control and 9/0 control
at the same time within five seconds
of step 2.
The system will now only respond
to the factory set code.
Unlocking the doors with the keyless entry system
To unlock the driver door, enter either the factory set code or the
personal code (each digit must be pressed within five seconds of the
prior digit). The interior lamps will also illuminate.
To unlock all doors, enter the factory set code or personal code (driver
door unlocks) and press the 3/4 control within five seconds.
Locking the doors with the keyless entry system
It is not necessary to enter the factory or personal code prior to locking
all doors. To lock the doors:
² Press the 7/8 control and the 9/0 control at the same time.
Activating/deactivating
.

May 19, 2009 | 2000 Ford Expedition

2 Answers

Need the factory keyless entry code to reprogram drivers door keypad. Owners manual insert is no longer available.


Check inside the trunk lid for a label with a 5 digit code. If unsuccessful, then any dealer would be able to help you by checking the VIN number.

May 11, 2009 | 1998 Lincoln Continental

1 Answer

I need help I changed the key door code on my 1996 Lincoln


1. Enter the original factory code, 2. within 5 seconds, press1/2 3. within 5 seconds enter your chosen new 5 digit code, pressing each digit within 5 seconds of the previous. 4. all of the doors will lock and then unlock to confirm programming of the new code. you can now use either factory or this new code. 6. To erase all of the personal entry codes and remote transmitters programmed - 1. Enter the factory code 2. press 1/2 within 5 seconds 3. press and hold 1/2 for two seconds

May 08, 2009 | 1996 Lincoln Town Car

1 Answer

Number pad on door


Yes, but you need the factory code also. First enter the factory code (5 digits), then press the 1/2 button, then enter your own 5 digit code. You can use either code now, but there is noo way to erase the factory code.

Mar 29, 2009 | 1998 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...