Question about Cars & Trucks

Open Question

How can I get my Liftmaster GDO and Clicker Model CLK1D to work with simultaneously?

I've programmed my Clicker and it worked. But now my auto remote won't work. When I reprogrammed the car, the Clicker doesn't work.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
eldorondo
  • 79 Answers

SOURCE: I have a 2008 ford

cycle your ignition 8 times on and off really fast then on the eight time you cycle the door locks should lock and unlock,then hit the lock and unlock button on your fob that should set it just for one car. if you try to reset the fusion key your dealer will charge you alot of money

Posted on Sep 26, 2010

Ad
  • 4044 Answers

SOURCE: I`ve replaced my steering column

Double check the wiring to the ignition unit and make sure everything is still lined up correctly.

Posted on Oct 28, 2010

  • 175 Answers

SOURCE: keyless remote and auto start does not work, how

You cannot since you don't possess the $35,000 piece of equipment that the dealer possesses. Take ALL of you remotes to the dealer for a one time reprogram of all of them for about 40 bucks total.

Posted on Feb 08, 2011

emissionwiz
  • 76691 Answers

SOURCE: one remote open two cars same time

No mystery they both have the same frequency.

Posted on Jun 01, 2012

suarezelec20
  • 259 Answers

SOURCE: 1999 toyota 4runner keyless remote doesn't work

Check with a Toyota dealer for your info

Posted on Aug 31, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

T & C 2001 REMOTE CONTROL PROGRAMMING


ATTENTION: You MUST HAVE one working remote to add one more to the system.
1. Press LOCK button 5 times at 2 second intervals to resynchronize remote.
2. Insert key into the ignition switch. Turn ignition to the RUN position (as far as you can
go without cranking engine). Wait for ignition chimes to stop.

3. Using the working remote, press and hold the UNLOCK button on the remote for 4 to 10
seconds.

4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then
press the PANIC button ( on the programmed remote ) for 1 second and release both
buttons. A chime will sound to indicate that the remote programming mode has been
entered ( allow 3 seconds for chime to sound ).

5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons
simultaneously then press and release just the UNLOCK button on the same remote.
A chime will sound indicating the remote has been programmed. Press and release
the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on
each new remote you wish to program at this time. A chime will sound afer each
additional remote is programmed.

6. Turn the ignition OFF and remove key.
7. Test Remotes.

Sep 17, 2012 | 2001 Chrysler Town & Country

1 Answer

Hello, I have a 1994 Xj6 Jaguar. I've purchases a new keyless entry clicker with directions to program it but after follwing them I've had no luck. My mechanic also tried and had no luck. Does anyone


i have the official jaguar manual and it doesnt even mention this procedure ,i will go to yard and get my alldata book ,Right it says they can only be programmed using diagnostic equipment so please dont blame the messenger

Nov 20, 2011 | Cars & Trucks

1 Answer

I have a 2003 dodge durango i dont have a working keyless remote how do i program the one I just bought from the dealership to work?


You must have one working remote to add one more to the system.
If you do not have one working remote right now then these instructions will not work.
You will have to have a Locksmith or dealership use a computer to program the first
remote for you.



1. Press LOCK button 5 times at 2 second intervals to resynchronize remote.
2. Insert key into the ignition switch. Turn ignition to the RUN position (as far as you can
go without cranking engine). Wait for ignition chimes to stop.

3. Using the working remote, press and hold the UNLOCK button on the remote for 4 to 10
seconds.

4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then
press the PANIC button ( on the programmed remote ) for 1 second and release both
buttons. A chime will sound to indicate that the remote programming mode has been
entered ( allow 3 seconds for chime to sound ).

5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons
simultaneously then press and release just the UNLOCK button on the same remote.
A chime will sound indicating the remote has been programmed. Press and release
the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on
each new remote you wish to program at this time. Locks will cycle after each additional
remote is programmed.

6. Turn the ignition OFF and remove key.
7. Test Remotes.

Mar 01, 2011 | 2003 Dodge Durango

1 Answer

How to program key fob 2003 durango


You must have one working remote to add one more to the system.
If you do not have one working remote right now then these instructions will not work.
You will have to have a Locksmith or dealership use a computer to program the first
remote for you.



1. Press LOCK button 5 times at 2 second intervals to resynchronize remote.
2. Insert key into the ignition switch. Turn ignition to the RUN position (as far as you can
go without cranking engine). Wait for ignition chimes to stop.

3. Using the working remote, press and hold the UNLOCK button on the remote for 4 to 10
seconds.

4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then
press the PANIC button ( on the programmed remote ) for 1 second and release both
buttons. A chime will sound to indicate that the remote programming mode has been
entered ( allow 3 seconds for chime to sound ).

5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons
simultaneously then press and release just the UNLOCK button on the same remote.
A chime will sound indicating the remote has been programmed. Press and release
the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on
each new remote you wish to program at this time. Locks will cycle after each additional
remote is programmed.

6. Turn the ignition OFF and remove key.
7. Test Remotes.




If I've helped you, please vote!

Feb 02, 2011 | 2003 Dodge Durango

1 Answer

How do i program 2003 dodge carvan key fob


ATTENTION: You MUST HAVE one working remote to add one more to the system.
If you do not have one working remote right now then these instructions will not work.
You will have to have a Locksmith or dealership use a computer to program the first
remote for you.

Click here to find an Automotive Locksmith in your area to program this remote.

1. Press LOCK button 5 times at 2 second intervals to resynchronize remote.
2. Insert key into the ignition switch. Turn ignition to the RUN position (as far as you can
go without cranking engine). Wait for ignition chimes to stop.

3. Using the working remote, press and hold the UNLOCK button on the remote for 4 to 10
seconds.

4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then
press the PANIC button ( on the programmed remote ) for 1 second and release both
buttons. A chime will sound to indicate that the remote programming mode has been
entered ( allow 3 seconds for chime to sound ).

5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons
simultaneously then press and release just the UNLOCK button on the same remote.
A chime will sound indicating the remote has been programmed. Press and release
the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on
each new remote you wish to program at this time. A chime will sound afer each
additional remote is programmed.

6. Turn the ignition OFF and remove key.
7. Test Remotes.

Feb 05, 2010 | 2003 Dodge Grand Caravan AWD

1 Answer

The remote alarm sytem doe'snot always work.have put new batteries in but still the same . I have had this problem from new the dealer said he could find nothing wrong, the trouble is it only does it in...


those factory clicker are pron to going bad i bet you its no good. you can try reprograming it, use manualy for directions on programing key remotes.

Oct 02, 2009 | 2003 Jeep Grand Cherokee

1 Answer

REPROGRAM THE FOB DODGE DURANGO 2004


ATTENTION: You MUST HAVE one working remote to add one more to the system.
If you do not have one working remote right now then these instructions will not work.
You will have to have a Locksmith or dealership use a computer to program the first
remote for you.



1. Press LOCK button 5 times at 2 second intervals to resynchronize remote.
2. Insert key into the ignition switch. Turn ignition to the RUN position (as far as you can
go without cranking engine). Wait for ignition chimes to stop.

3. Using the working remote, press and hold the UNLOCK button on the remote for 4 to 10
seconds.

4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then
press the PANIC button ( on the programmed remote ) for 1 second and release both
buttons. A chime will sound to indicate that the remote programming mode has been
entered ( allow 3 seconds for chime to sound ).

5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons
simultaneously then press and release just the UNLOCK button on the same remote.
A chime will sound indicating the remote has been programmed. Press and release
the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on
each new remote you wish to program at this time. Locks will cylce afer each additional
remote is programmed.

6. Turn the ignition OFF and remove key.
7. Test Remotes.

Thanks for using FixYa - a Very Helpful rating is appreciated for answering your FREE question.

Jul 09, 2009 | 2004 Dodge Durango

1 Answer

Programing garage door openers


Press the button on the garage door opener (red, green, or yellow) until the led starts to blink and within 10 seconds or so, ( I think it's actually 30 seconds) press the GDO control button on the remote and the opener should capture the signal and respond to it from then on. Any remotes that were set to control the opener will be wiped and the new one will be in control. There are instructions that came with the opener that show how to do this from the remote or the key-less entry. If you are talking about an in-car device then your vehicle manual may be needed too, but the main thing is to set the GDO to be looking for the code from the car remote and when you press the in-car remote the garage door should respond. If you have programmed a remote or key-less entry then it is about the same procedure.

Jun 12, 2009 | 2008 Subaru B9 Tribeca

1 Answer

In following the Chevrolet Tahoe instruction to program a garage door opener, I am having problems with the system working. The codes are the rolling key type.


Press the outer 2 buttons untill the bink rate changes then release.

Press the button you want to train at the same time you hold down an unused button on one of your factory GDO remotes, hold untill flash rate changes.

Press learn button on GDO, press the button you just programmed in the Tahoe, should be programmed.

(Info should be in users manual under HomeLink.)

May 28, 2009 | 2007 GMC Yukon Denali

1 Answer

2000 dodge neon alarm


This is what i found but you need one fob.

here is another way if you can get it done( i bevlieve) There is a box under the dash of your can it says keyless entry if you have the right box and the fab just plug and play.

Make sure you get the screws in the defrost vent there is some screws and then it there is snaps


http://shopping.msn.com/specs/keyless-entry-remote-fob-clicker-for-2004-dodge-neon-with-do-it-yourself-programming-requires-1-wor/itemid1124228415/?itemtext=itemname:keyless-entry-remote-fob-clicker-for-2004-dodge-neon-with-do-it-yourself-programming-requires-1-wor

Nov 15, 2008 | 2002 Dodge Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...