Question about Cars & Trucks

Open Question

What is the reason my engineering won't rotate after I left off my oilpan overnight

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car has some white smoke by oil pan which happens after heat is turned on. Smoke is coming from under the oilpan maybe.


White smoke usually means coolant getting into engine and burning. The smoke will find the easiest place to come out. The reason it happens after heat is turned on is the coolant is active more

Mar 15, 2016 | 1997 Dodge Neon

1 Answer

2010. How do I replace oil pan and gasket?


1 drain oil
2 remove bolts retaining oilpan
3 clean mating surfaces on oilpan and engine block
4 check fit gasket to see if holes line up
5 reattach oilpan to engine block and tighten to specified torque
6 put required lube oil in motor to level and start to check for leaks

Aug 26, 2015 | Chevrolet Malibu Cars & Trucks

1 Answer

Why will my 1998 chevrolet cheyenne not start unless primed after sitting overnight


by primed are you supplying a fuel source if so then the car is not getting fuel to burn. this indicates your fuel pump is bad and needs replacing and change the fuel filter also. the reason the pump won`t work sitting overnight is that the pump can`t build up enough pressure possibly because the fuel pressure is not being held, but after the first start up the system can maintain enough pressure to start through out the day. you can have the fuel pressure and volume checked with a gage when the problem occours to verify.

Aug 25, 2014 | Cars & Trucks

1 Answer

HAVE FLATTENED BATTERY AND IT WON'T CHARGE


Search on Google its Wonderfull sarch Engine.

Jul 29, 2012 | 2008 Saab 9-3

2 Answers

Where is the oil pump on this car


you don't have to take the oil pan down its located if looking at the engine top view its to your far left under the alternator and I have a feeling your going to be replacing that a lot there's been problems with that type of oil pump

Mar 28, 2012 | 2004 Hyundai Elantra

1 Answer

Directions for changing the oil pump


THE OIL PUMP IS LOCATED INSIDE THE OILPAN ON THE BOTTOM OF THE ENGINE! YOU'LL HAVE TO DRAIN THE OIL, AND REMOVE THE OILPAN! ON SOME VEHICLES, YOU HAVE TO UNBOLT THE ENGINE MOUNTS, AND RAISE THE ENGINE ENOUGH TO REMOVE THE OIL PAN, SO YOU CAN GET INSIDE

Mar 01, 2011 | 2000 Chevrolet Blazer

1 Answer

2010 Ford fusion I left the parking lights on overnight and find battery dead the next morning. I charged battery overnight, but still could not start engine. When key is turned it displays the battery...


Well contact your dealer and tell them that your battery is gone bad for no reason and don't mention you let the light overnight because your battery is under warranty and they will put in a new one. Good luck

Jan 09, 2011 | 2009 Ford Fusion

1 Answer

Where's the oil filter located?


right next to the oilpan or on the side of the engine if its the cartridge type then itll be in the pan. look carefully it may be on the right or the left side of the engine i cant remember off hand.

Jul 14, 2009 | 2000 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...