Question about Nissan Quest
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: odometer doesnt work
Your speedometer works, your odometer quit.
Chances are, your drive gear has given up. The popular story is that you
hit the trip meter reset while the car was in motion. While it is entirely
possible that that particular event was the event that caused the actual
failure, the root cause lies at the VDO factory. The tiny, little, 15 tooth
planetary gear that drives the odometer and trip meter from the speedo
sensor has turned into a soft jello like rubber over the years due to excessive
heat and a corrosive oil lubricant that has turned that essential gear
into mush. The separation of a couple teeth from that gear has been inevitable. Now, if you have an electrical(led) displayed odometer, this could be a blown fuse or the sending unit is damaged. Either way, you will have to remove the cluster from the dash to access this problem spot.
please rate and god bless..
Posted on Mar 23, 2009
I had all my analog instrument panel gauges stop working after they did the state emissions test. I found the proper fuse in the fuse block located under the hood. Simply unplugged the fuse, noticed it was still good, and plugged the same fuse (10A) back in and all the gauges started working again. Guess it needed a reset atfer they plugged in for the emissions.
Posted on Aug 14, 2009
Yes the dealer is right. there are several places that rebuild these for less than a new one. The dealer should be able to send it out or get a rebuilt cluster. If the dealer doenst want to help you, find a good repair shop, they usually have a place they get clusters from.
Posted on Oct 14, 2009
there are 2 large terminal plugs with the wiring for all the instruments that are plugged into the back of that panel. make sure they are snug and in place. You reach in and under but it may easier to "simply" remove the cluster. 4 screws hold it in place accessible form underneath and with a long phillips screwdriver and lighting.
Posted on Oct 28, 2009
Tips for a great answer:
Feb 20, 2018 | Ford Cars & Trucks
Jul 25, 2017 | Saturn Cars & Trucks
Feb 14, 2015 | 2000 Jeep Cherokee
Sep 09, 2013 | 2006 Nissan Quest
Jul 11, 2013 | 2006 Nissan Quest
Apr 04, 2017 | 2002 Nissan Quest
Jun 22, 2009 | 2004 Oldsmobile Alero
Mar 24, 2009 | 1994 Mercury Cougar
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: