Question about 2002 Jeep Liberty

1 Answer

Noise in the rearend the dealership said that it was clutch packs and would cost $750.00 to repair. Is this really that hard to replace in the rearend??

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 322 Answers

Well you need some know how to do this, if the dealer told you the clutch packs are bad, you can try to replace them yourself, the only saving is the job cost. think about it.

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Grinding or scraping noise comin from rearend 1998 chevy Z71


Clutches in a diff only work when you are going around corners or when on wheel is slipping. so in normal straight ahead driving they are not working. I would be checking for a failed axle bearing of brake worn and failing

Mar 30, 2013 | 1998 Chevrolet K1500

1 Answer

2000 pathfinder will hardly back up shakes bad


either the reverse gear is binding up in the trnsmission, the differential has issues or if its a stick(manual shift) the clutch needs adjusted or replaced..repost findings...

Jan 21, 2013 | 1987 Ford Ranger

2 Answers

Best way to fix front rearend gears are striped


the ONLY way is to replace the carrier (gears) Are you sure it's gears and not the axle shafts? Gears are pretty "bullet proof" and usually the only way to harm them is to run low or out of gear lube.

Jan 04, 2011 | 1993 Dodge Dakota

1 Answer

My clutch went right to the floor a couple days ago in my '94 Isuzu Rodeo. Now, I am having a hard time getting into reverse and shifting, but I am not having any issues with RPMs or anything like that. Is...


If you can get the transmission down you can replace the clutch assembly on your own. I assume you have original clutch installed in the vehicle. This sounds like a clutch problem and if you have a Hydraulic Clutch assembly it could just need service. You could get a Haynes Repair manual on the vehicle from Auto Zone or most major Auto Repair stores and that would give you the steps involved in doing the repair. Other than getting the Transmission down it's not really that difficult of a job.

Sep 20, 2010 | 1995 Isuzu Rodeo

2 Answers

1998 ford expedition how to install rear spider gears


Find a PICK-your-PART auto salvage and go get a whole rearend for $150 or so. You will be way far ahead. Or submit to the BLUE OVAL (dealership). Sorry no easy fix.

Sep 03, 2009 | 2000 Ford Expedition

1 Answer

Fan clutch


THERE IS A PROGRAM UPDATE FOR THIS PROBLEM. IT WILL COST YOU AN HOUR LABOR CHARGE BUT IT SHOULD WORK.


Jul 01, 2009 | 2002 Chevrolet TrailBlazer

2 Answers

Rear end slipping?? 2001 dodge ram 1500


Some limited slips use an additive, available at the dealers parts department.Otherwise,it's a rebuild.Good luck. (Are you sure it's not the trans?)

Jun 10, 2009 | 2001 Dodge Ram 2500 Truck

2 Answers

2002 Honda civic makes rear end noise when going around corners.


well, differential repair can be costly but, the dealership will cost the most to be honest. about around $1200 at the least.

Mar 15, 2009 | 2002 Honda Civic

4 Answers

2004 Saturn Vue shifting problem


You should probably check the shifter cable. I had the same thing happen and then I couldn't shift into 2nd, 4th, and reverse gears. Then the cable snapped and I had to replace it. Be careful "man-handling" the shifter. If you break the shift linkage at the base of the shifter it's about $45 from the dealership. It's cheap plastic and doesn't take much to break. If you really want to know if it's the shift cable and not the gearbox crank the engine, have someone hold the clutch, disconnect the shift cables from the box, and manually shift the gears. If they move smooth, it's probably your cable which would mean there's a kink in it somewhere. You can't fix that. Depending on the VIN you're looking at anywhere from $189 (what mine cost with tax) to a little over $200 (from the dealership brand new). Talk to the parts desk at a Saturn dealership and they can tell you which one you need. Hope this helps

Jul 31, 2008 | 2004 Saturn VUE

Not finding what you are looking for?
2002 Jeep Liberty Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...