Question about Cars & Trucks

1 Answer

Fuel tank & pump, are they the same for a 2007 & 2011 model (Qubo)

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Cars & Trucks Expert
  • 252 Answers

I dont know what type of vehicle you have but with 40 years in the automotive repair business, I would say no. too many years between.

Posted on May 10, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to change the fuel pump on a 2007 saturn ion


You will need to drop the gas tank to get to the fuel pump just hope it's not full or it will b quite heavy

Jul 02, 2015 | 2007 Saturn Ion

2 Answers

Fuel pump replacement


Fuel Pump - Multi-Port Fuel Injection models REMOVAL & INSTALLATION 1984-95 Models Fig. 1: Loosen the hose clamps and tag the fuel hoses before disconnecting them . . . 91075p07.jpg
Fig. 2: . . . then detach the hoses from the fuel pump module/sending unit 91075p06.jpg
Fig. 3: Disengage the fuel pump module/sending unit wiring harness connector 91075p05.jpg
  1. Disconnect the negative battery cable.
  2. Remove the fuel tank filler cap.
  3. Relieve the fuel system pressure as outlined in this section.
  4. Drain the fuel from the fuel tank.
  5. Raise and support the rear end on jackstands.
  6. Remove the fuel inlet and outlet hoses from the sending unit. Be ready to catch any spilled fuel.
  7. Disengage the sending unit wires. Fig. 4: The fuel pump module/sending unit retaining ring must be rotated counterclockwise for removal 91075p01.jpg

  8. Using a brass punch and hammer, remove the sending unit retaining lockring by tapping it counterclockwise. Fig. 5: Carefully pull the fuel pump module/sending unit out of the fuel tank - step shown with the fuel tank mounted on the vehicle 91075p03.jpg
    Fig. 6: Remove and discard the fuel pump module O-ring gasket 91075p02.jpg

  9. Remove the sending unit, which incorporates the electric fuel pump, along with the O-ring seal from the fuel tank. Discard the O-ring.
  10. Remove and discard the pump inlet filter.
  11. Disengage the fuel pump terminal wires.
  12. Remove the pump outlet hose and clamp.
  13. Unfasten the pump top mounting bracket nut and remove the pump. To install:
  14. Install a new inlet filter on the pump. Fig. 7: This is the proper positioning of the fuel pump module assembly inside the fuel tank 86745g55.gif

  15. Assemble the pump and bracket. Connect the hose and wiring.
  16. Install the unit and new O-ring in the tank. The rubber stopper on the end of the fuel return tube must be inserted into the cup in the fuel tank reservoir.
  17. Install the lockring. Carefully tap it into place until it seats against the stop on the tank.
  18. Connect the hoses.
  19. Engage the wiring.
  20. Lower the vehicle, fill the tank, run the engine and check for leaks.
1996-98 Models Fig. 8: Fuel pump module location - 1996 model shown 86745g52.gif
  1. Drain and remove the fuel tank as outlined in this section.
  2. Using tool 6856 or its equivalent, remove the module locknut which is threaded onto the fuel tank. The module will spring up when the nut is removed.
  3. Remove the module. To install:
  4. Install a new gasket and place the module into the opening in the fuel tank.
  5. Position a new locknut on top of the module and tighten the nut using tool 6856 or its equivalent to 40 ft. lbs. (54 Nm).
  6. Install the fuel tank as outlined in this section. Fig. 9: Locknut removal using tool 6856 or its equivalent 86745g56.gif
    Fig. 10: Install a new gasket on the fuel tank opening 86745g57.gif
prev.gif next.gif

Jan 19, 2011 | 1993 Jeep Grand Cherokee

1 Answer

Ihave a 1991 honda civic hb and i think i"m having problems with my fuel pump .on this model can i get to the pump from the back seat of this vehicle or due i have to drop the gas tank. also whereis the...


you must remove the fuel tank. see procedure below.

The fuse and relay should be in the engine compartment relay box. Check fuses 2 and 14. The relay might be labeled PGM-FI

1988-91 MODELS

The fuel pump is located in the fuel tank.
  1. Disconnect the negative battery cable.
  2. Relieve the fuel system pressure.
  3. Raise and safely support the vehicle.
  4. Remove the fuel tank drain bolt and drain the fuel into a suitable container.
  5. On Civic models (except CRX and Wagon) unplug the fuel pump electrical connector in the trunk. On CRX, remove the storage compartment and unplug the fuel pump electrical connector. On Civic Wagon, remove the rear seat and carefully disengage the fuel pump electrical harness.
  6. On Civic Wagon with 4WD, remove the driveshaft from the rear differential and the exhaust pipe and muffler.
  7. Remove the 2-way valve cover and fuel hose protector.
  8. Unbolt the fuel lines.
  9. Place a suitable support under the fuel tank.
  10. Remove the fuel tank strap nuts and let the straps hang.
  11. Remove the fuel tank.
  12. Remove the fuel pump mounting nuts and the fuel pump.

To install:
  1. Install the pump assembly into the tank and make sure the unit is properly sealed.
  2. Install the tank into the vehicle and tighten the strap nuts. Connect the hoses and wiring.
  3. On 4WD vehicles, connect the driveshaft and the exhaust system.
  4. Put about three gallons of fuel into the tank and test the system.

402ec39.gif

Oct 26, 2010 | Honda Civic Cars & Trucks

3 Answers

Do I have to drop the fuel tank to replace the fuel pump on a 94 Buick le saber


Yes ,,instructions are below, Use eye protection for this procedure
Remove or Disconnect:

  1. Relieve Fuel Pressure
  2. Disconnect negative battery cable
  3. Raise vehicle on hoist
  4. Remove Fuel Tank
  5. Remove Fuel Gage sending and pump assembly by turning cam lock ring counterclockwise. Lift assembly from fuel tank and remove fuel pump from fuel gage sender unit.
  6. Disconnect pump wires, hose clamps, and clamp around pump body
  7. Pull pump assembly out of rubber connectors
  8. Inspect fuel pump attaching hose for any signs of deterioration. Replace as necessary.
Install or Connect:

  1. Push fuel pump assembly into attaching hose
  2. Connect pump wires, hose clamps at attaching hose and around pump body
  3. Place Fuel tank sending unit and pump assembly into tank using new O-ring
  4. Place cam lock over assembly and lock by turning clockwise
  5. Install Fuel Tank
  6. Start engine and check fuel pipe connector for visual leaks

Oct 20, 2010 | 1994 Buick LeSabre

3 Answers

Where is the fuel pump located


If you vehicle is fuel injected, it will be located in the fuel tank. Most fuel injected vehicles have an electronic fuel pump that require removal of the fuel tank to access it.

Oct 16, 2010 | Toyota Camry Cars & Trucks

1 Answer

How do you change the fuel pump on a 2002 saturn vue?


Determine which fuel pump your Saturn VUE will need. This depends not only on the make and model, but also the engine size. Models made before 2008 may have a 2.2 L L61, 2.4 L BAS hybrid, 3.0 L L81 or 3.5 L L66 engine. Current models are offered with a 2.4 L LE5, 3.5 L LZ4 and 3.6 L LY7 engine.

Prepare your vehicle for fuel pump servicing. Relieve the fuel system pressure and disconnect the negative battery cable with a socket wrench. Disconnect the fuel tank.

Disconnect the fuel pump's electrical connector, fuel lines and hoses. Remove the retaining ring for the fuel pump with wrench SA9156E and disconnect the retaining clip by pulling it toward the float arm and lifting up. Lift the fuel pump out of the fuel tank and discard the old fuel tank seal.

Install the new fuel pump using the items included in the kit and be sure to replace the fuel tank seal. Install the lock ring on the fuel pump with tool SA9156E and connect the fuel lines and hoses. Plug in the wiring harness, connect the fuel tank and negative battery cable.

Start your vehicle to check for leaks.

Oct 08, 2010 | 2002 Saturn VUE

2 Answers

Wheres the fuel pump located


the fuel pump is located inside the fuel tank, the tank must be pulled to replace the pump.

Mar 05, 2010 | 1996 Ford Crown Victoria

1 Answer

Where is the fuel pump located on 1988 Chrysler Conquest?


v
Fig. 1 Fuel pump mounting on sedan and hardtop models


8d46297.jpg


Fig. 2 Fuel pump mounting on station wagon models


1b98f55.jpg





Some early models and all turbocharged or fuel injected cars are equipped with an electric fuel pump. On the early models the fuel pump is mounted in the trunk on sedans and hardtops and in the left rear wheel housing on station wagons. On the turbocharged Colt and fuel injected Vista, the fuel pump is in the gas tank. On the Conquest, it is on the frame rail, behind the left rear wheel, and on later models is located on the fuel tank.

Fig. 4 Electric fuel pump used on Conquest models


0b5a430.jpg




On late Conquest models, the fuel pump is tank mounted. It is necessary to remove the fuel tank for fuel pump service. Refer to the Colt/Vista procedure.

Hope helped.

Mar 03, 2010 | 1988 Chrysler Conquest

1 Answer

I need to replace my puel pump for plymouth voyeger 1999.


The fuel pump in a Plymouth Voyager is electric so you should check the fuses and relays before inspecting the fuel pump itself. If you have fuel in your tank but your vehicle has difficulty getting fuel, you may need to clean your fuel pump or replace it entirely. The Plymouth Voyager comes in a variety of styles and this may affect your choice of fuel pump.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); });
Things You'll Need:
  • Fuel pump kit
  • Socket wrench set
  • Torque wrench
  1. Step 1 Determine the fuel pump that your Plymouth Voyager will require. This depends on the make and model and engine size of your vehicle. Models manufactured from 1991 to 1995 came with a 2.5 L K, 3.0 L Mitsubishi 6G72, 3.3L EGA or 3.8 L EGH engine. Models made after 1995 may have a 2.4 L EDZ, 3.0 L Mitsubishi 6G72, 3.3 L EGA or 3.8 L EGH engine.
  2. Step 2 Relieve the fuel2_bing.gif system pressure and drain the fuel tank. Disconnect the negative battery cable with a socket wrench.
  3. Step 3 Support the fuel tank and loosen the strap bolts with a socket wrench. Remove the fuel line and electrical harness for the fuel pump.
  4. Step 4 Lower the fuel tank so that you can remove the lock ring for the fuel pump. This will allow you to remove the fuel pump.
  5. Step 5 Install the new fuel pump using the items included in the kit. Use a torque wrench to tighten the lock ring and bolts for the main fuel tank straps to 40 ft. lbs. Torque the bolts on the T strap for the fuel tank to 250 in. lbs.
  6. Step 6 Complete the installation by reversing the removal procedure.

Feb 19, 2010 | 1999 Plymouth Voyager

2 Answers

Fuel pump 98 s10


Hi:
You must first drain and lower the fuel tank, as your pump is mounted inside. With the fuel tank supported, undo the tank mounting straps, and the filler hose, then slowly lower it until you can disconnect the fuel lines and electrical harness. The pump assembly is now accessable. Remove and replace the assembly , then reinstall the tank .

Dec 21, 2009 | 1998 Chevrolet S-10 Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...