Question about Cars & Trucks
Check the door sticker or the owner's manual for recommended tire sizes. If they differ from front to back, the reason it is because the chain in the transfer case has to maintain a tension on it. if you have 4 of the same tires then that tension is lost and slack on the chain will cause abnormal wear on the chain and some internal parts or the case itself. Very expensive to fix if ignored.
Posted on May 10, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
its your serpentine belt (thats what its called) and you will need a 3/8 ratchet and then find the belt tensioner. The tensioner has a spot where you need to put the ratchet into and pull or push depending on whatever way and that will releive the pressure off the belt so you can take it off.
Posted on Apr 17, 2009
you may have damaged the ABS sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the ABS sensor on the spindle
Posted on Jul 15, 2009
Tips for a great answer:
Sep 10, 2015 | 2008 Hyundai Santa Fe
on Oct 24, 2013 | Hyundai Cars & Trucks
Jan 13, 2015 | 2004 Hyundai Santa Fe
Oct 12, 2014 | 2008 Hyundai Santa Fe
Jul 29, 2012 | 2004 Hyundai Santa Fe
Basically the wiring of the large harness corresponds to the pins like this.
Starting in the upper right hand corner and working down the right side from A12 down to A1.
1=Left rear output-red
2=Left rear output-blue
3=Right rear output-black
4=Right rear output-yellow
6=Left front input-black
7=Left front input-yellow
8=Left rear input-orange
9=Left rear input-green
Back up to upper left hand corner on the large plug
13=Right front tweeter output-red
14=Right front tweeter output-blue
15=Left front tweet output-red
16=Left front tweeter output-blue
18=Right front input-red
19=Right front input-white
20=Right rear input-blue
21=Right rear input-red
23=Right front sub (+) output-yellow
24=Right front sub (-) output-black
The small harness is the same above with the upper right position being pin 1 going down to pin 4 then back up to the top for pin 5 down to pin 8.
1=Memory Power-Lrg White
2=Amp Ground- Lrg Black
3=Left front sub (+)output-yellow
4=Left front sub (-) output-black
5=Left front mid (+) output-white
6=Left front mid (-) output-brown
7=Right front mid (-)output-brown
8=Right front mid (+) output-white
Hope this will help you.
Jan 04, 2011 | 2002 Hyundai Santa Fe
May 08, 2010 | 2002 Hyundai Santa Fe
Jul 28, 2009 | 2002 Hyundai Santa Fe
May 20, 2009 | 2004 Hyundai Santa Fe
26 people viewed this question
Usually answered in minutes!