Question about GMC Cars & Trucks

Open Question

1993 GMC 454 engine. What is RPM for max torque ?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

techbuster
  • 5081 Answers

SOURCE: 1993 gm 454 engine fan belt assembly

Go to www.autozone.com and click on repair info and enter in car info and then click on repair manuals and a manual for your vehicle will come up and it should be listed in that manual. Sometimes the diagram is on the hood of the vehichle rather than on the engine compartment but you probably already looked there... Hope this helps
please rate my answer

Posted on Jul 08, 2009

daves944
  • 1050 Answers

SOURCE: 1. How many degrees is the proper ignition timing

Awesome little car! I'm not sure where they want the timing at idle but if you have an advance style timing light, bring the engine up to 3500 rpm and twist the distributor so that you see 40 degress btdc. and you'll be good to go. I'll dig up the idle specs later if you like and post them.

http://en.wikipedia.org/wiki/Toyota_K_engine#4K

Posted on Feb 27, 2011

  • 1 Answer

SOURCE: rebuilt chevy 454 engine, now need distributor and

just put a new starter in my 1993 chevy 454 and now i'm not getting fire, the old starter solenoid was sticking and melted the neg battery cable. I'm wondering if that also burned something else out?

Posted on Apr 17, 2011

bonedivers
  • 1140 Answers

SOURCE: where is the computer located

most of the time its under drivers seat

Posted on May 27, 2011

  • 3640 Answers

SOURCE: I have no power to selanoid it is a 1993 gmc 3500

there could be a bad wire somewhere between the solenoid and battery. that is the only thing i can think of if you have done everything else. I will lean towards starter relay, it should be in fuse box. if not that I would check for a bad ignition switch. not letting power to go to starter. good- day !!

Posted on Jul 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing for a 1985 GMC 454 engine


timing is always before top dead centre . Check the specifics but generally 10-15 degrees bftdc

Mar 28, 2014 | 1985 GMC C2500

1 Answer

Installing a used engine in my boat


This is a random choice for your engine.
You would really need the model and probably the serial to get the correct specs.
The Perkins Model AD3.152 engine used in Massey Ferguson 135 tractors built between 1968 and 1975 had the following torque specs.
45 hp
1211 ft pounds of torque at 1300 RPM
Max RPM was 2000

Feb 16, 2013 | Cars & Trucks

1 Answer

Im looking for a spark plug wirng diagram for a 1966 corette 427


1966 - 1969 with 4 Barrel Carb (L36)
(Low Compression Model)
Max Brake Horsepower - 390 @ 5200 rpm
Max Torque - 470 @ 3600 rpm
Stroke - 3.76
Bore - 4.251
Compression - 10.25
Firing Order - 18436572

1966 with 4 Barrel Carb (L72)
(High Compression Model)
Max Brake Horsepower - 425 @ 5600 rpm
Max Torque - 460 @ 4000 rpm
Stroke - 3.76
Bore - 4.251
Compression - 11.0
Firing Order - 18436572


zjlimited_1418.jpg

283, 327, 396, 409 and 427 CID Engine 1965-1966
Firing Order 1-8-4-3-6-5-7-2


zjlimited_1417.jpg

350 CID Engine 1969-1974 Corvette, 427 CID Engine 1969 Corvette
Firing Order 1-8-4-3-6-5-7-2


Hope this helps (remember to rate this answer)

Jun 15, 2011 | Chevrolet Corvette Cars & Trucks

1 Answer

2002 Toyota Camry Engine Torque Specs 2.4 L. 16 V. 4 Cyl.


Petrol engine 2362 ccm
Max torq: 218 Nm at 3800 rpm
Max power: 152 hp at 5600 rpm
Compression 9.6:1

Nov 26, 2009 | 2002 Toyota Camry

1 Answer

Rebuilt chevy 454 engine, now need distributor and


just put a new starter in my 1993 chevy 454 and now i'm not getting fire, the old starter solenoid was sticking and melted the neg battery cable. I'm wondering if that also burned something else out?

Oct 27, 2009 | 1993 Chevrolet C/K 3500

1 Answer

Fuel tank capaity for a 1992 suzuki swift glx


diamond_9x9.gif Dimensions 999999_1x1.gif trans1x1.gif Exterior Length: 146.1 in. Width: 62.4 in. Height: 53.1 in. Wheel Base: 89.2 in. Curb Weight: 1870 lbs. Interior Front Head Room: 37.8 in. Front Shoulder Room: 51.6 in. Rear Head Room: 36.5 in. Rear Shoulder Room: 50.5 in. Front Leg Room: 42.5 in. Rear Leg Room: 29.8 in. Luggage Capacity: 10.4 cu. ft. Maximum Seating: 4 trans1x1.gif diamond_9x9.gif Performance Data 999999_1x1.gif trans1x1.gif Performance Base Number of Cylinders: 4 Base Engine Size: 1.3 liters Base Engine Type: Inline 4 Horsepower: 100 hp Max Horsepower: 6500 rpm Torque: 83 ft-lbs. Max Torque: 5000 rpm Drive Type: FWD diamond_9x9.gif Fuel Data 999999_1x1.gif Fuel Fuel Tank Capacity: 10.6 gal. EPA Mileage Estimates: (City/Highway/Combined) Manual: 24 mpg / 32 mpg / 27 mpg
Range in Miles: Manual: 254.4 mi. / 339.2 mi. / 286.2 mi.

Jul 10, 2009 | 1992 Suzuki Swift

1 Answer

1993 gm 454 engine fan belt assembly


Go to www.autozone.com and click on repair info and enter in car info and then click on repair manuals and a manual for your vehicle will come up and it should be listed in that manual. Sometimes the diagram is on the hood of the vehichle rather than on the engine compartment but you probably already looked there... Hope this helps
please rate my answer

Jul 08, 2009 | 1998 GMC Blazer

2 Answers

Transmission swap


yes but you may have to change output shafts, costs $85.00

Jun 24, 2009 | 1993 Chevrolet Suburban

1 Answer

'93 940 no turbo engine stuck at max RPM


YOU IDLE CONTROL VALVE IS GOING BAD ON YOU. TRY TO CLEAN IT BUT BEST TO JUST REPLACE. LOCATED UNDER INTAKE MANIFOLD

Dec 23, 2008 | 1993 Volvo 940

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...