Question about 1991 Mercury Grand Marquis

1 Answer

WINDOW MOTOR I JUST WANT TO REMOVE THE MOTOR NOT THE WHOLE ASSEMBLEY ???

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

There should be 3 dimples on the door sheet metal by the motor. Drill the holes big enough to get a 5/16th socket in there and take the 3 bolts out and then the motor. Been awhile but i think it is 5/16 socket. Don

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to replace window motor in sedona and cant get window to go down to unscrew regulator from window. can you manually get window down to access screws.


You should be pulling the motor off to get the regulator out anyway, and when you do, it will come down. Remove all the bolts on the reg, then drop the whole unit to remove the motor, then remove the glass. This should work. Hope it helps.

Mar 27, 2010 | 2001 Kia Optima

1 Answer

How do I change the headlights for the 2009 acadia?


first are they HID
if just HALOGEN LIGHTS BULB
jack the vehicle up and remove the tire on the side you are replacing the light
remove the inner fender
you will see a round plug turn and remove then you will see the bulb
replace the bulb and reassemble

now if they are HID LIGHTS OR YOU ARE REPLACING THE WHOLE HEADLIGHT ASSEMBLEY
then the whole FRONT BUMPER FACIA HAS TO COME OFF
hope this helps let me know

Nov 15, 2009 | 2007 GMC Acadia SLE

1 Answer

How to do A 98 Tahoe Truck Headlight Replacement


If its just the bulb you can untwist from inside under hood and replace. If the whole light assembley needs to be changed I am pretty sure it is just like my 98 3500. Lift the hood and remove the screws holding the grill on, then at the bottom of the grill there are screws as well , if I am remembering right I removed my parking lights also. Then the whole grill just pops off, remove screws holding light assembley and replace. Its really easy just take your time and get all the screws out, DON"T snatch on the grill, it will come off easy once you get the all

May 24, 2009 | 1998 Chevrolet Tahoe

1 Answer

Power door is not delatching


there is a door lock actuator that has failed, it releases the latches so the door can open. you need to remove the door panel. unbolt the window and tape it as to hold the window up then remove the window regulator assembley then unbolt the lock actuator from the back side.

Apr 23, 2009 | 2004 Toyota Sienna

1 Answer

How to exchange rear tail light assembly on 2003 taures


open the trunk remove the scuff plate that is located on the back part of the trunk closest to you. then pull the carpet back on the side that you are trying to get to and remove the three or four nuts holding the light assembley in. pull the assembley away from the body then disconnect the bulbs from the assembley. thay should just turn and come out socket and all.

Jan 12, 2009 | 2003 Ford Taurus

1 Answer

1992 f150 power window


If the window motor runs then perhaps the window channels need lube, get a can of silicone spray lube and apply to both window channels until it drips out the door bottom and then retry, if no change replace the regulator.

Jul 25, 2008 | 1992 Ford F150 SuperCab

1 Answer

2001 ford exped


first remove the sail like cover at the right upper corner of door panel.remove the window switch assembley by prying upward, once you get this pryed out disconnect the electrical connectors from the switch assembley,remove the top panel screw whare you took the sail shaped cover off then remove the screw that can now be seen through the window switch hole,remove the curtesy lamp lens and the screw behind it.pull the door release handle outward and pop the trim cover off from around it and remove the handle by taking out the bolt. after all this get hold at bottom of panel and lift straight up then out.

Jul 09, 2008 | 2001 Ford Expedition

Not finding what you are looking for?
1991 Mercury Grand Marquis Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

fordexpert

Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...