Question about Cars & Trucks

Open Question

Hi i need to find out what is the aux port size of the chery QQ3 0.8TE 2011 MODLE. A normal 3.5 mm does not fit it is too large. Could you assist please.

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


the dimension to determine the size of the morse taper is taken at a distance back from the large end of the taper
from your large dimension (.434 " ) equates to 11.023 mm and the closest taper to that is morse taper number 1 which has a dimension of 12.065 mm at the measured distance from the taper end
the smallest morse taper size is number 0 which is 9.045 mm and the next size up is morse taper number 2 which is 17.780 mm
references are from page 74 of the engineers black book edition 2

Nov 25, 2017 | Morris Cars & Trucks

1 Answer

2011 Jeep Grand Cherokee front caliper socket. 3/8 & 10 is to small, 12 mm is to big , 55 torx fits but I need a Allen socket . What size....

so we find it is hex.
and not torx
and is not 12 and not 10
but is 11.
its 11mm allen hex.
i just did mine but my sets are complete and had no issues, but I do know the cheaper sets skip sizes.

Dec 12, 2016 | 2011 Jeep Grand Cherokee

1 Answer

Trying to take collent lines for transmission and can't figure out the size of the nut on the rear bottom where it goes into Trans mission .

1/2 or 5/8 inch. 13 or 16 mm. Watch as you loosen it, sometime the line doesn't loosen. but the fitting does. The fitting( which you have to hold in place) is 3/4 inch or 19 mm. Could be bigger. You didn't give year make and model. Or the transmission size.

Jul 19, 2015 | Cars & Trucks

1 Answer

The AUX button says SAT 1, SAT 2, AND SAT 3. It does NOT say AUX Line In and does not recognize anything plugged into the aux port. What can I do to get the AUX port working???

Make sure whatever is plugged into the Aux port is the proper size and configuration (2-lead, 3-lead; 3.5mm, etc) as far as the cable, is properly seated (not so big that it doesn't fit all the way in) and that the device is on. Most Aux inputs don't activate unless there is an active signal coming in.

Apr 02, 2015 | 2007 Ford Edge SEL

1 Answer

1993 Geo metro 1ltr 3 cylinder engine need transmission bolt sizes

most are like 10 mm nut size and 14 wrench size , try on till it fits , most are about 2 inches lone what happened to the old ones ,

Nov 25, 2014 | 1993 Geo Metro

1 Answer

Can 205/70/r15 fit on mg 2000 acura integra

195/55 R15 is the normal size. The number 195 is the width in mm. The number after the slash is the aspect ratio. That means the side wall of the tire is 55 percent of 195. The R means radial and the 15 is the rim size. With that in mind, the 205 tires are going to be 140 mm sidewall. The 195 has a sidewall of 95 mm. I don't believe you can because the tire will hit the inside of the fender well.

Nov 01, 2014 | Cars & Trucks

1 Answer

Why does the usb port not work

hi neil
prehaps the device you connected is defective or consumed more power than possible
try changing the fuse and inspect your device before you reuse it !

Apr 25, 2014 | 2011 Fiat 500

3 Answers

I need to replace the abs sensor on a 1995 Chevy

No way are they 14.5 mm. Try an SAE socket instead of metric. I think you will find that a 9/16 is the correct size.

Oct 05, 2009 | 1995 Chevrolet Cargo

3 Answers

CD/AUX button

See here for a description and picture of an adapter.

Good luck!


Jun 16, 2008 | 2004 Pontiac Grand Prix

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

14479 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides