Question about Chevrolet Cars & Trucks

Open Question

What is the tork on the bolts of the head of my 1999 spark chevrolet

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

justuscc
  • 360 Answers

SOURCE: chevy 5.7 17 bolt heads tork specs

Cylinder Head Bolt (Preferred Method) All Bolts First Pass in Sequence 22 ft.lb Long Bolt Final Pass in Sequence 75 deg. Medium Bolt Final Pass in Sequence 65 deg Short Bolt Final Pass in Sequence 55 deg. Cylinder Head Bolt (Optional On-Vehicle Strategy) First Pass in Sequence 26 ft.lb Second Pass in Sequence 44 ft.lb Final Pass in Sequence 66 ft.lb

Posted on Oct 13, 2008

  • 1 Answer

SOURCE: replacing head after repair bent valves need tork specs for head

if interested i can e-mail you a diagram of the torque sequence and torque values just did one this weekend.

Posted on Nov 15, 2008

  • 135 Answers

SOURCE: the torque pressure on 2000 chevrolet bolts on the cylender heads

most are 65 foot pounds ,that is what i say it is . gm on v8 engines are same ,head bolts are 65 and hope this it some help,thanks robert b.

Posted on Jun 27, 2009

  • 101 Answers

SOURCE: need to replace head gasket ,need tork for head

18 ft/lbs and then three more sequences of 90 degrees each

Posted on Oct 15, 2009

Testimonial: "very helpful thanks"

  • 74 Answers

SOURCE: what is the tork spec on th head bolts on a 1999

on a 350 5.7 litre chevrolet it is 65lbs

Posted on Apr 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

HOW DO YOU INSTALL A CRANK POSITION SENSOR 1999 CHEVY ASTRO VAN 4.3 LTR MOTOR


The crank sensor is inside the distributor and may also be called an HEI pickup.
Disconnect wiring harness and remove the two tork head screws and lift out. Now would be a good time to replace the rotor & distributor cap if you haven't done so lately.
I hope this helps.

Jul 07, 2011 | 1999 Chevrolet Astro

2 Answers

NEED T0RQUE REQUIREMENTS FOR STARTER BOLTS 1994 6.5 DIESEL


If it is a bolt 3/8 dia. hard grade 8 it is 45 foot pounds if it's the tork head grade 8 it's 35 psi.

Jun 28, 2010 | 1994 Chevrolet C/K 3500

1 Answer

Tork on head bolts 05 5.3


Cylinder Head M8 Bolts - in Sequence
30 N·m
22 lb ft
Cylinder Head M11 Bolts - First Pass in Sequence
30 N·m
22 lb ft
Cylinder Head M11 Bolts - Second Pass in Sequence
90 degrees
Cylinder Head M11 Bolts - Final Pass in Sequence
70 degrees

Nov 29, 2009 | 2005 Chevrolet Tahoe

2 Answers

I have a chevy 283 v8, I have replaced the head gaskets however i dont know the tork sequence or spec to reinstall them, also the rocker bolt spec


Spark Plugs: 20-25 Cylinder Head Bolts: 60-70 Intake Manifold: 25-35 Exhaust Manifold: 18-22 Rocker Arm Shaft Bracket: none Rocker Arm Covers: 25 (inch/lbs) Connecting Rod Cap Bolts: 30-35 Main Bearing Cap Bolts: 60-70 Flywheel to Crankshaft: 55-65 Vibration Damper or Pulley: Pressed on

Nov 03, 2009 | Chevrolet Impala Cars & Trucks

1 Answer

Need the tork spec for the rods, mains, and cam 99 cav 2.2


go to any good parts store and get or order
a repair book specific for your car that
will have the info that u require

gl G

May 03, 2009 | 1999 Chevrolet Cavalier

1 Answer

Replacing head after repair bent valves need tork specs for head


if interested i can e-mail you a diagram of the torque sequence and torque values just did one this weekend.

Nov 14, 2008 | 1999 Daewoo Nubira

4 Answers

Chevy 5.7 17 bolt heads tork specs


Cylinder Head Bolt (Preferred Method) All Bolts First Pass in Sequence 22 ft.lb Long Bolt Final Pass in Sequence 75 deg. Medium Bolt Final Pass in Sequence 65 deg Short Bolt Final Pass in Sequence 55 deg. Cylinder Head Bolt (Optional On-Vehicle Strategy) First Pass in Sequence 26 ft.lb Second Pass in Sequence 44 ft.lb Final Pass in Sequence 66 ft.lb

Oct 13, 2008 | 1999 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...