Question about Cars & Trucks

Open Question

How long will a door last? - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passenger sliding door latch doesn't work right. Door closes all the way except the latch doesn't pull it in or closed the last 2 inches, when I use the remote or switch


Clean the tracks and guides the door moves on, then lubricate them with a light coat of white Lithium grease, commonly called "Lubriplate". This will greatly reduce the power needed to close the door fully.

Jul 21, 2016 | 2007 Dodge Grand Caravan SXT Minivan

2 Answers

My honda odyssey ex 2008 the doors do not move on


Do a reset on the door system, by pulling the door fuse. I don't have location, possibly drivers side fuse box.

Sep 15, 2014 | 2008 Honda Odyssey

1 Answer

Automatic door lock 1999 toyota prerunner


hi jerome
I have the procedure for Toyota auto lock, is worth to try it
AUTOMATIC LOCK SETTING
1) Step in the vehicle and make sure that all doors are closed completely
2) Insert the key into the ignition key cylinder.
3) Wait for more than 5 seconds.
4) After turning the key to the ACC position, turn the key from the ACC to the
ON position 5 times within 10 seconds (Last position : ON).
? Status Monitor LED will illuminate for 30 seconds.
Note : In case you implement 6 times or more by mistake,
action steps 6)-8) you made will be canceled.
Please retry from step 2).
5) While the LED is illuminated :
• Open and close the driver's door 2 times.
• Turn the key to the ACC position.
? LED will continue illuminating.
? Indicator lights will flash 2 times.
Ignition controlled door lock ON :
6) While the LED is illuminated:
• Open and close the driver's door 1 time.
• Turn the key ACC-ON-ACC 1 time (Last position : ACC).
? Indicator lights will flash 1 time.
? LED will extinguish.
Ignition controlled door lock OFF :
6) While the LED is illuminated :
• Open and close the driver's door 2 times.
• Turn the key ACC-ON-ACC 1 time (Last position : ACC).
? Indicator lights will flash 2 times.
? LED will extinguish.

Jan 28, 2014 | Toyota Camry Cars & Trucks

1 Answer

Driver door lock will not lock with key entry or key pad


press the last two keys on your outside door keypad simultaneously, all doors should lock. if this doesnt work suspect the doorlock actuator inside the door panel

Apr 08, 2013 | 2007 Lincoln MKZ

1 Answer

Power door locks


I didnt see the last answer. The last guy probably meant the hoses that the wires run in, into the doors from the body.

Near the hinges on each door is a rubber hose, that the wires go to the door locks and power windows,

Some times they get split or damaged and a wire can break

May 06, 2010 | 1993 Toyota 4Runner

1 Answer

I have a 55 plate VW Golf 2.0 Fsi - the alarm keeps going off by itself! We disconnected the battery last night (to get some sleep!) and it's started again today.... agh, HELP!


You probably have a faulty door,boot or bonnet lock.If you put the inside light switch to the setting for the light to come on when the doors are open,close all the doors and see if the light goes off.If your model golf has a display on the dash,it shuold tell you which door is open.It could also be a faulty interior sensor or a faulty alarm horn.A diagnostic machine will be able to tell you which was the last alarm activation.

Aug 29, 2009 | 2004 Volkswagen Golf

1 Answer

Mini one


Door panels should be 4 T-30 screws. one is behind the door reflector. just pry this out with a screw driver. then the other two are 2/3's the way twards the inside of the door. then the last one is inder the arm rest get a dull butter knife and slide the knife in the middle of the arm rest between the armrest and door handle. the armrest should slide forward toward the knife. Apply some force do not pull out slide forward. then remove the last screw from behind the armrest and remove the door panel. Just door panel clips remain. Grab the panel and pull it will just pop pff.

Feb 24, 2009 | 2002 Mini Cooper

1 Answer

Driver's side door won't open in the cold


.
Power Door Lock Operation (Front Doors)
The front doors do not have traditional door lock actuators. They have electronically controlled door latches that will operate depending on the status of the door lock system. This status is determined by the front door modules and the last known state of the lock system. If the last known state is LOCK, the latches will not release when the door handles are operated. If the last known state is UNLOCK, the latches will release when the door handles are operated. The front doors are also equipped with red door lock status indicators. The front door modules will supply power and ground to the indicators to illuminate them when the lock system is in a virtual state of lock. The indicators will not continuously illuminate when the vehicle is locked. They will illuminate for approximately 5 seconds after a lock switch activation or after a door handle has been operated and the front door modules are in a virtual state of lock. For further information on the front door latches, refer to Power Door Latch Description and Operation .
I would assume they check for DTC'S - diagnostic trouble codes ?
DTC B3062 Front Door Key Lock Switch Circuit
• DTC B3067 Front Door Key Unlock Switch Circuit
DTC B3849 Exterior Door Handle Switch Circuit
The left front exterior door handle and right front exterior door handle switch signal circuits provide inputs to the driver door module (DDM) and passenger door module (PDM) when an exterior door handle switch is activated. These inputs allow the door module to detect a door open request. The door modules provide voltage to the door handle switches. If the door module detects that a ground is applied for greater than 30 seconds continuously, a DTC is set and the door module will ignore the door handle switch input.


Free wiring diagrams here http://www.bbbind.com/free_tsb.html
Enter vehicle info. year , make , model and engine size . Under system click body & accesories .Then under subsystem click power locks . Click the search button then the blue links

Cadillac CTS Door Handle Repair Micro Switches Replacement 2nd Gen

Aug 10, 2017 | 2006 Cadillac STS

1 Answer

Problem with overhead light


if the pin switch on the door is faulty, it may be sending spikes to the bulb which it does not like. Change the pin switch at the door, and your problems may be over.

Dec 26, 2008 | 1998 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...