Question about Cars & Trucks
The 2009 Chevy Silverado 1500 doesn't have a fuel pump relay. It has a fuel pump control module. If you are having an issue with your fuel pump and it is not the pump itself, just the cost of the fuel pump control module is about $177 from GM or about $95 after market.
Didn't know your motor size but have added a link that will give you a start searching.
Module GM 20759945
Posted on May 09, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The thermostat is in the hose on the passener side of the waterpump.It is in the part that has the three 10mm bolts.Please rate my answer, Thank you.
Posted on Mar 05, 2009
Should be on the passenger side kickplate below the glovebox and to the right. You may have to remove the plastic panel to access it or look for a small hole in it and feel around for the button
Posted on Apr 23, 2009
The Fuel Pump Relay is located in the Glove Box under a little cover on the upper left side. The Fuel Control Relay is the left relay and The Fuel Pump Relay is the right. To test these relays, swap them and then try to start the vehicle, or blow the horn. If the horn blows then use that relay for the pump and you may at least drive the vehicle where needed! If the vehicle starts, then replace them as a pair.
Posted on Apr 27, 2009
passengers side firewall behind plastic cover thats about 12 inches long with a bump in the middle,where the battery cables hook together ,there should be 2 relays there and i think its the one closest to the drivers side
Posted on May 08, 2009
take the six bed bolt loose and then take three buddies slide the bed back put in the new pump slide it back n place and put the bed bolts back in. if u drop the tank u can easily break the hard plastis lines that go to the fuel tank. u only have to take the fill lines and taillight wires loose this way its alot quicker, and easier.
Posted on Aug 07, 2009
Tips for a great answer:
Jan 27, 2016 | 2013 Chevrolet Silverado 1500
Oct 23, 2015 | Cars & Trucks
Jan 20, 2013 | 2005 Chevrolet Silverado
Jan 23, 2011 | 1999 Chevrolet Silverado 1500
Sep 24, 2009 | 1999 Chevrolet Silverado 1500
Sep 08, 2009 | 2000 Chevrolet Silverado 1500
Jun 04, 2009 | 1999 Chevrolet Silverado 1500
Mar 04, 2009 | 2001 Chevrolet Silverado 1500
33 people viewed this question
Usually answered in minutes!