Question about Hyundai Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
An easy fix, if the check engine light is on find an Auto Advance, they can clear the code for you. Any auto parts store may be able to as well, Auto Zone is another one that may be able to help.
Posted on Nov 22, 2008
it is very easy to change the oil put the car on ramps secure the back end look for the drain plug underneath the engine make sure you have the right size wrench and when you remove the plug also check the gasket on the plug to make sure it is not cracked you will also need an oil filter wrench and my other suggestion to you is to go to autozone to see if they have a Haynes repair manual for your car and if they don't see if they can order you one in the mean time they can also print you off a diagram of how to change the oil in you car safely
Posted on Jan 20, 2009
Check your engine oil and break oil weather it is in below low level or full, if it has in low level get an engine oil for your car module and pour it. otherwise go to authorized Hyundai service centre and check for it.
Posted on Aug 25, 2009
Did you change the gas cap with a Honda gas cap? Tighten it at least three clicks?
Also, Honda recommends that you never top off the tank when getting gas (only go to the click-off of the pump; otherwise you can get back flow into the system that will cause the code).
Tightening or replacing the cap will not immediately cause the light to go off; it can take up to three days of driving for the light to reset.
To check if your readiness codes (emission system) are set, turn the ignition to ON (II), without starting the engine. The Malfunction Indicator Lamp will come on for 20 seconds. If it then goes off, the readiness codes are set. If it blinks 5 times, the readiness codes are not set.
You can, of course, try resetting your engine light to see if it will come back on (which it probably will). I believe the procedure is:
Turn off the engine.
Press and hold the Select/Reset knob (odometer) in the instrument panel, then turn the ignition switch to ON (II).
Hold the knob for approximately ten seconds until the indicator resets.
Hope this helps you.
Posted on Nov 17, 2009
Tips for a great answer:
Apr 22, 2014 | 1998 Hyundai Elantra
Nov 10, 2017 | Hyundai Elantra Cars & Trucks
Sep 23, 2012 | Cars & Trucks
Mar 28, 2011 | 1997 Ford Expedition
Nov 16, 2010 | 1998 Hyundai Elantra
Mar 29, 2010 | 2004 Hyundai Elantra
Sep 26, 2009 | 2001 Hyundai Accent
Jul 22, 2009 | Hyundai Motor 2003 Elantra
13 people viewed this question
Usually answered in minutes!