Question about Cars & Trucks

Open Question

Program key in new switch - Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 2002 Lincoln continental theft protection is on and won't let me program new keys


Greetings, I read your question and I think Reliable-Store can help you in this. Here's the site link.
Best Manuals

Jul 17, 2016 | Lincoln Cars & Trucks

1 Answer

How can I program my new keys that came with locksmart ignition lock cylinder switch from autozone is there a way I can do it my self on my 06 Honda civic


you can't do it!either local locksmith with correct tool or the DEALER.and you will need to take the car with you on a tow truck!it ain't gonna start,until they program it to your car with a special scan tool!

Oct 31, 2015 | 2006 Honda Civic 1.8

2 Answers

How can i get a manual for 2005 jeep liberty ?


Owners manual.. Dealer with he VIN#. Mechanics manual, any parts store. It covers all the Liberty's.

Oct 27, 2015 | 2005 Jeep Liberty

1 Answer

How do I program new key switch to car after installing a new one


1999 you had to put ignition on and wait 10 minutes until security light stop flashing and came solid now it is program .Switch must be brand new ,from scrap wont work, 2004 ?

Dec 06, 2014 | 2004 Chevrolet Impala

1 Answer

Lost my remote on my 02 jeep liberty and need to


the key fob? or radio remove or what?
remote to what.

the operators manual covers this , under car keys.
the car came with 2 Fobs. lost them both now>?
RKE its called, (makes looking fact more easy)
is this car with SKIS Immoblizer option> yes./no
if yes.
SENTRY KEY IMMOBILIZER SYSTEM - IF
EQUIPPED
im reading your operators guide now.
lost that too>?
Duplication of keys may
be performed at an authorized dealer (or locksmiths) or by using the
Customer Key Programming procedure.

DIY, takes 1 key , good, called a valid key, in the below text.
You can program new keys to the system if you have two
valid keys by doing the following:
1. Cut the additional Sentry Key Transponder blank(s) to
match the ignition switch lock cylinder key code.
2. Insert the first valid key into the ignition switch and
turn the ignition switch ON for at least 3 seconds but no
longer than 15 seconds. Turn the ignition switch OFF and
remove the first key.
3. Insert the second valid key and turn the ignition
switch ON within 15 seconds. After ten seconds, a chime
will sound and the SKIS indicator light will begin to
flash. Turn the ignition switch OFF and remove the
second key.
4. Insert a blank Sentry Key into the ignition switch and
turn the ignition switch ON within 60 seconds. After 10
seconds, a single chime will sound. The SKIS indicator
light will stop flashing, turn on for 3 seconds; then turn
off.
The new Sentry Key has been programmed. Repeat this
process to program up to a total of 8 keys.


did i guess right, the Key FOB RKE,
remove key entry fob.?

Sep 18, 2014 | 2002 Jeep Liberty

1 Answer

Got a new ignition but it wont start. how do i program the ignition to the car?


You will have to program you keys to the immobiliser in the car. The keys transmit a code to the immobiliser in the car and if you have fitted anew ignition switch you will have new keys with the wrong transponder. You may be able to fix it by replacing the new transponder in the new key with the old transponder out of the old key

May 17, 2013 | 2000 Saturn SL

3 Answers

My PT Cruiser remote have no Panic Button How I programme another one


According to the 2003 Owners Manual:

You can program new keys to the system if you have two valid sentry keys by doing the following:
1. Cut the additional Sentry Key Transponder blank to match the ignition switch lock cylinder key code.
2. Insert the first valid key into the ignition switch and turn the ignition switch ON for at least 3 seconds but no longer than 15 seconds. Turn the ignition switch OFF and remove the first key.
3. Insert the second valid key and turn the ignition switch ON within 15 seconds. After ten seconds a chime will sound and the Theft Alarm Light will begin to flash. Turn the ignition switch OFF and remove the second key.
4. Insert a blank Sentry Key into the ignition switch and turn the ignition switch ON within 60 seconds. After 10 seconds a single chime with sound. The Theft Alarm Light will stop flashing, turn on for 3 seconds; then turn off.

The new Sentry Key has been programmed. Repeat this process to program up to a total of 8 keys."

Without 2 valid keys, it is back to the dealer for them to reprogram.

Also, could check the Chrysler PT Cruiser Sedan - Convertible Owners Manual (page 17)

Hope helps.

Sep 02, 2010 | 2002 Chrysler PT Cruiser

1 Answer

Remote got wet in salt water. Had battery changed


Programming
When
Key added or replaced. System malfunction.
How
Driver's door open and key removed from ignition switch. Insert key into ignition switch, then remove it. Within 5 seconds: Insert key into ignition switch, then remove it. Within 40 seconds: Close and open driver's door twice. Insert key into ignition switch, then remove it. Within 40 seconds: Close and open driver's door twice. Insert key into ignition switch. Close driver's door. Switch ignition ON and OFF once to program a new key code whilst retaining the original codes or twice to program a new key code whilst erasing the original codes. Remove key. System should now lock and unlock vehicle, once or twice depending which mode has been selected. Carry out the following button procedure within 40 seconds: Press key lock or unlock button once. Within 3 seconds: Press same key lock or unlock button once. System should now lock and unlock vehicle.
NOTE: If system locks and unlocks vehicle twice, programming procedure has not been completed. Repeat button procedure.
If required repeat button procedure to program remaining keys.
NOTE: To exit programming mode: Open driver's door. NOTE: A maximum of 4 keys can be programmed

This will work providing printed circuit is not damaged in remote

Jul 20, 2010 | 2004 Toyota Camry

1 Answer

The key switch on my 1997 Ford Mustang has gone bad and I need to replace it. It has a key coded anti thief device on this car. How can I install the new switch and get it to accept the new key code?


usually all you have to do is replace the switch with the matching key and this would program automatically if not then you may have to have a diagnostic hooked up and program it manually.

May 22, 2010 | 1997 Ford Mustang Cobra

1 Answer

Central locking went on my lexus took it the garage they said the key wouldn't reprogramme is there anything that can be done


Programming
When
Key added or replaced. System malfunction.
How
Driver's door open and key removed from ignition switch. Insert key into ignition switch, then remove it. Within 40 seconds: Press lock and unlock on the vehicle door lock control switch at 1 second intervals 5 times. Close and re-open driver's door. Within 40 seconds: Press lock and unlock on the vehicle door lock control switch at 1 second intervals 5 times. Insert key into ignition switch. Switch ignition ON and OFF once to program a new key code whilst retaining the original codes or twice to program a new key code whilst erasing the original codes. Remove key from ignition switch. System should now lock and unlock vehicle, once or twice depending which mode has been selected. Within 40 seconds: Simultaneously press and hold key lock and unlock buttons for a maximum of 1,5 seconds. Within 3 seconds: Press any key button for a minimum of 1 second. System should now lock and unlock vehicle once.
Manufacturer: Lexus Model: IS 2,0 200 Engine code: 1G-FE Output: 114 (153) 6200 Tuned for: R-Cat Year: 1999-05
© Autodata Limited 2009 25/02/2010 V8.207M-ukad113581

NOTE: If system locks and unlocks vehicle twice, programming procedure has not been completed. Repeat programming procedure.
Within 40 seconds: If required repeat button procedure to program remaining keys.
NOTE: To exit programming mode: Close driver's door or insert ignition key. NOTE: A maximum of 4 keys can be programmed

Feb 25, 2010 | Lexus IS Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...