Question about Cars & Trucks

Open Question

How to replace the led bulb in the 5638 model

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why choose H4 LED lights instead of other models?

Installing LED aftermarket bulbs in a headlight assembly designed for halogen bulbs is ******* and throws less light on the road and causes more glare. They are NOT legal drop in replacements.

Headlight replacement cost Ricks Free Auto Repair Advice

Sep 29, 2017 | Cars & Trucks

1 Answer

Hello, I have a Insignia 55" model NS-55DR620NA18 and I believe the LED bulb is blown out. I cant seem to find a bulb for the tv anywhere. Where can I buy a replacement bulb?

Sorry this website doesn't offer parts locator services. That said did you contact the online TV parts suppliers that are all over Google?

Jul 11, 2017 | Cars & Trucks

1 Answer

I just replaced all the bulbs but the book says 3457 for the front amber in the guy that car Parts told me to put 4157 them Genssi 3057 3457 4157 White LED Bulb ... > ... > Bulbs > Tail Lights, Inc.Genssi 3057 3457 4157 White LED Bulb Replacement Tail Light (Pack of 4) ... note we recommend Red LED bulbs behind red lenses, but white bulbs can also .... However, as cool as they look, I had to replace them with GE 3457NH/BP2 ... The LEDs were just not anywhere near bright enough for me at all. ... Book reviews

Sep 19, 2015 | Cars & Trucks

1 Answer

Is there a replacement led bulb for h7 on subaru legacy 2011

Mar 16, 2015 | 2011 Subaru Legacy

1 Answer

My Turn Led Signal Can Not Blink

The LED lamps are not plug-in replacements for incandescent ones because they place a much lower load on the flasher.

Mar 07, 2017 | 1994 Mercedes-Benz C-Class

1 Answer

The left side dash light is out on the air conditioning/heater guage on the panel. How do I replace that bulb?

The LED bulbs on the AC/FAN cluster can be replaced. However, if you go to a dealer, they'll want to replace the entire cluster.

There are forums that can show you step by step LED bulb replacements that require only a simple trip to Radio Shack to get a soldering gun, some LED bulbs and a solder extractor (for the old stuff that melts off).

Here's a link to a step-by-step bulb replacement with pictures:

Good luck!

Sep 07, 2011 | 2007 Toyota 4Runner

1 Answer

When failed trun signal bulb, Jeep turning signal is fastly blinking. I changed rear turn signal bulb with LED bulb, but turn signal blinking speed doesn't go to normal, At first couple of seconds it is...

Try replacing with the same bulb type as was failed. Flasher unit isusually reliant on resistence from the bulbs to what speed that side will flash at when powered.Some of these led type have less resistence and that equates to a faster flash speed.That is why when one bulb blows that side will flash faster or may even stay on without flashing.You could even swap the led to the other side( to confirm.Check with the bulb retailer to whether they have those bulbs with a higher rated resistence in led.If this vehicle has leds as standard,you may need to get the correct type from dealer. Hope this helps or get back with findings if it still has fault after replacing bulb.

Mar 29, 2011 | 2009 Jeep Patriot

2 Answers

LED does'nt work on tail light but conventional bulb is working

Maybe your LED bulb is defective and so you need to replace that LED bulb with a new good quality one.
I can recommend you search for a LED High Bay Lights which are of high quality and cost-effective.These bulbs are reliable and save a lot of power.
You can also find here simple and easy to use plug and play LED lamps.
Hope this will help!


Apr 11, 2017 | 1995 Honda Civic

1 Answer

Parking light bulb Toyota TAV

inside the rear compartment there is a triangular shaped panel on the left and right side near the rear door
open the read door and look between the back of the compartment beween there and the rear wheel arch.
open this panel and look inside toward the rear of the vehicle
you will see the back of the tail lights.
depending on model the reverse light is the lower one.
grip and turn the plastic housing about 90° to the left to remove.
remove the bulb by depressing the bulb and turing to the left and release.
warning: do this with a cloth or glove as the bulb may be damaged and break in your hand.
replace with simular rated bulb and reverse the dismantle procedure.

LED bulbs are also available, they are bright and give off little heat and last much longer than conventional bulbs.

NOTE: ensure that the use of LED bulbs are allowed by traffic law in your country.

Nov 14, 2009 | 2006 Toyota RAV4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides