Question about Mazda Cars & Trucks
Things already done: Replaced Timing belt Replaced Cam Position Sensor Replaced Mass Air Flow Sensor Replaced Fuel Pump Cleaned EGR Tested Compresssion & fuel pressure No codes displaying Car has low mileage, one driver Have consulted many other technicians to no avail. HELP! Thank you!!!
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: car runs rough at idle
clean out ur throttle body, just follow the hose from the air filter to the throttle body. Need 2 people to do this. Don't remove the hose completely from the throttle body. Just enuff to be able to spray ur intake cleaner into the throttle body. Do this especially if its worse when the motor is hot, as this would confirm the problem.
Posted on Sep 04, 2008
SOURCE: I have a 1996 mercury
Wow you change everything, TPS was right thing to do and so is the Idle air control,and MAF and EGR, fuel pressure, So it idles high then some one tried to defeat the stall in gear? Even if there is a vacuum leak creating high idle it shouldnt stall in gear, , What color is the transmission fluid? when in gear in drive step on the acelerator pedal to maintain idle to prevent car from stalling. Just enough to maintain let say 1100RPM. Is there a vibration? I mean a torque convertor vibration. Torque convertor stall are common an GM and Nissan,very rare do I ever see it on Ford. I really belive the IAC is not getting power and is just been adjusted manually, cause I know its not the transmission, At idle in gear pull the plug on the idle Air control does it change in idle setting? If it doesnt change in Idle setting the adjustment that was use to control the setting lower the idle to its normal setting. Plug the idle air control in then.The idle air should change the setting. If it doesnt its not getting the signal it should.
Posted on Apr 29, 2011
Remove the mass air flow,and clean it with intake cleaner spray,or mass air flow cleaner spray,if this does not help,reset the system again,by removing the negative battery cable for at least 20 seconds,then put it back on,if this does not help,replace the mass air flow sensor
Posted on Jan 17, 2012
do you get a funny smell when driving mabe a blocked cat
Posted on Mar 02, 2012
Tips for a great answer:
Jul 30, 2014 | 1999 Mazda Protege
Aug 04, 2012 | 2001 Mazda Protege
Mar 01, 2011 | 1999 Plymouth Breeze
Dec 01, 2010 | 2003 Mazda Protege
Jul 29, 2010 | Ford Escort Cars & Trucks
Apr 12, 2010 | 2001 Mazda Protege
Mar 17, 2017 | 2001 Mazda Protege
Mar 15, 2009 | 1999 Mazda Protege
Dec 30, 2008 | 2003 Mazda Protege
Nov 18, 2017 | Mazda Cars & Trucks
27 people viewed this question
Usually answered in minutes!