Question about BMW 328i
Worked yesterday,wont even light up today
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You may try cleaning the filters and checking for loose connections. Heat and cooling filters should be changed or cleaned with some regularity. Like an air conditioner, these things require maintenance that are often overlooked.
Posted on Jan 16, 2009
Sounds exactly like what my mom's car was doing as for the blower only working on high. It was the resistor... I assumed it was the climate controls and replaced them but it didn't change anything then i thought that i must be the blower motor and replaced that too but it turned out to be the resistor which is under the dash on the passenger side of the car.
Posted on Feb 08, 2009
Page 43 in the document linked to below is a wiring diagram of the heated seats in an 850. If you're lucky some wires have come loose and are hanging under the seats, if you're unlucky you might have to do some shredding of the seats in order to replace broken parts. If so there is a fairly inexpensive repair kit made specifically for this purpose, but I don't have the part number available right now. Arm yourself with a multimeter and get to it!
Posted on May 30, 2009
Remove fuses 10 and 11 in the underhood junction box. Leave out for 5 minutes then reinstall. If the seats start working your Zephyrs dual climate control seat module will need replaced.
Posted on Jul 03, 2009
Tips for a great answer:
Jul 26, 2016 | 2011 BMW 3 Series 328i
Feb 17, 2013 | 2003 Chevrolet Silverado 1500
Apr 20, 2012 | 2007 BMW 3 Series 328i
Jun 16, 2011 | 1996 Audi A4
In order to obtain conclusive testing of the heated seat system, the Controller Area Network (CAN) data bus system must be checked.
The most reliable, efficient and accurate means to diagnose the heated seat system requires the use of a Scan Tool and the Service and Body Diagnostic Information.
Diagnostic logic is built in to the seat module and the instrument cluster (CNN) to help the person trying to locate the problem by the most efficient means possible. Anytime a problem is suspected, a Scan Tool should be obtained and used to retrieve any stored fault codes in the heated seat module and/or instrument cluster.
Feb 21, 2011 | 2007 Chrysler Aspen 4x2
Dec 07, 2010 | 1997 BMW 328
May 02, 2010 | 1997 BMW 318
Mar 20, 2010 | 2005 Ford Expedition
Aug 04, 2009 | BMW 328 Cars & Trucks
Jul 25, 2009 | 2001 BMW 325
18 people viewed this question
Usually answered in minutes!