Question about Ford Cars & Trucks

1 Answer

1985 Ford 555B tractor hydraulics do not work

Replaced pump and drained/cleaned tank. Both front and rear will move a very slight bit if idle is high.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 40 Answers

You might have changed the conections
check the valves

Posted on May 08, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Don't know how to read the hydraulic dipstick for a 1944 ford 2n tractor


Ford Tractor Hydraulic System - My Ford Tractors

www.myfordtractors.com/hydraulics.shtml
All N-Series Tractors - Ford-Ferguson 9N, 2N, and Ford 8N ... 6 - How long has it been since you changed the hydraulic fluid? ... If that didn't do it, read on. ... then remove the bottom bolt from the inspection plate that has the hydraulic dip-stick.

Yesterday's Tractors - Fifty Tips for Ford 9N, 2N and 8N ...

www.yesterdaystractors.com/articles/artint268.htm
I'd like to say that the reason I have an 8N Ford tractor is because that's the tractor ... The N tractors have a common sump for the rear end, hydraulic pump andtransmission. ... (Read the label.) .... Take the inspection plate with the dipstick off.

Ford 8N, 9N, 2N, NAA Tractors Information - SSB Tractor ...

www.ssbtractor.com/wwwboard/messages15/
Helpful information and resources on Ford 8N, 9N, 2N, NAA tractors from SSB Tractor, a leading provider of tractor parts, manuals, implements ... 1944 ford 2n: What type of oil to use? and whats the oil pressure should be? ...... N Series Trans/Hydro Fluid - Interesting To Read ... Ford NAA/Jubilee Hydraulic dipstick location?

Jan 01, 2016 | Ford Cars & Trucks

1 Answer

Why front bucket nor rear lift arms will not move?


by your description im assuming that your rerfering too a tractor , with it seems none of your hydraulic implements that move, i guess first thing to ck is proper fluid level in hydraulic res tank (not confused with engine oil) second is to make sure hydaulic pump is turning some tractors use a Pto drive shaft right off the transmission or front of engine and others use a belt that drives off the water pump need to ck all these things

Aug 28, 2014 | Cars & Trucks

1 Answer

Low revertations in idle bedford cf


clean your map and tps sensors

Jul 17, 2012 | 1985 Ford F150

1 Answer

1985 Econoline 350 RV, filled both tanks with gas, ran on front tank needle droped 3/4 of a tank in 10 miles when I got home fuel was dumping out the rear tank. I took to repair shop they replaces...


You need to replace your fuel sending unit, This sends info, to your ecm "computer" witch sends to your gagues. It is located on top of your fuel tank. Best of luck to you.

Apr 07, 2011 | 1985 Ford F350

1 Answer

I have a 1995 ford 4x4 with the 4.9 6 cyl. I have a problem with fuel delivery from the front tank.The truck idles real ruff when starting from the front tank but the not the rear tank.The problem with the...


Hi:
You might have two seperate problems:

If fuel is draining from the rear tank to the front, there is a tank shuttle valve located on the drivers side frame rail that is the most likely suspect to fix that.
It costs around $120 or so, and when it fails, you get that siphoning going on, and often the front tank wont pump at all.
In your case, if the engine is running rough off the front tank, you might have another issue, such as a bad in tank fuel pump, but the shuttle valve needs changed first , so maybe it might fix the other problem too!

Apr 21, 2010 | 1995 Ford F150 Styleside Regular Cab

2 Answers

1985 classC 350 econoline motorhome


Either the fuel line from the front tank to the switching valve is plugged or kinked, or the valve is not moving all the way to that tank (if electrically switched). Pull the hose (from that tank) off at the valve--do you get good fuel flow? If the front tank is lower than the valve, try switching the fuel lines from the two tanks at the valve, and set the switch for the rear tank. If it now runs, clean the valve or replace it.

Aug 08, 2009 | 1985 Ford Econoline

1 Answer

Fuel Tanks reversed , Gauge not reading?


The Ford trucks were recalled for the tank switch replacement. Somehow the switches would pump fuel from one tank to the other. This would cause the one tank to overflow and or result in a fire from hot exhaust temps coming into contact with the fuel. Check the dash tank switch. It is probably bad.

Mar 12, 2009 | 1985 Ford F 250

1 Answer

My 1986 Ford Bronco II It doesn't run


1985 thru 1988 have two fuel pumps one of them is in the tank check it.the other is on the fram rail.

Jul 28, 2008 | 1986 Ford Bronco II

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...