Question about 1999 BMW 328 Series

1 Answer

Car used 2 days ago fine. Went to start today and the remote only opened the driver door. Put key in ignition and hazards went off then made a clicking noise when tried to turn over and the lights on the dash went on. Do I need a new battery

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 70 Answers

Yes, this sounds like a flat battery. You could try to get a jump start off someone else, so that you know it is definately not the engine. Otherwise, purchase a new battery and you should be fine.

Posted on Jul 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's your question?key program code for 06 xterra


1. Close and lock all doors with the driver's side power lock / unlock switch located
on drivers door panel.

2. Insert key into ignition and remove it from the ignition key cylinder at least 6 times
within 10 seconds. Your hazard lamps will flash if you have performed this step
successfully. NOTE: Withdraw key completely from ignition cylinder each time. If
this procedure is performed to fast, system will not enter programming mode.

3. Insert key into ignition and turn to the ACC position.

4. Within 5 seconds, push ANY button oon the keyless remote. Your hazard lamps
will flash. NOTE: Do not press the button on the remote more than one time or the
programming will not be successful.

5. If there are any remaining remotes (including old ones), Unlock then Lock all doors
using switch on drivers door panel and within 5 seconds press ANY button on the next
remote. Your hazard lamps will flash. Repeat this step for each remote (including any
existing remotes).

6. Turn key to the off position, remove key from the ignition. Unlock door using switch on
door panel and open drivers door.

7. Test remote(s).

Jun 27, 2016 | Cars & Trucks

1 Answer

Mazda 2006 Tribute 6 cy - why is dashboard key light on when key not in but goes off when driver door is opened?


Hi I am a tech mechanic I deal with things like that Evey day lol but sounds like the anti theft or the ignition switch n lock n key to but you also have broke wires touching even in thecolom

Oct 21, 2015 | 2006 Mazda Tribute

2 Answers

I changed my batteries in my keyless remote


  • Jeep 1990 and later Remote keyless entry programing
  • Put the key in the ignition with all doors and trunk closed
  • Open the driver's door on the automobile and leave the door open.
  • 4 Move the switch on the door to the lock position while the door is open.
  • 5 Switch the key in the ignition two clicks to the right to the "On" position. do not start
  • 6 Press the lock button on your keyless remote for your Jeep and hold the button for 5 seconds. Release the button and remove the key from the ignition to complete the programming.


  • Read more : http://www.ehow.com/how_5019251_program-keyless-entry-jeep.html

    Jan 20, 2015 | 2002 Jeep Liberty

    1 Answer

    Car is "dead" but battery/alternator/starter are all in working order. Hornet is causing this.


    Sounds more like a faulty battery terminal to me from your description ,try cleaning and make sure its tight then smear with petroleum grease.Clean terminal with a kettle of hot water first

    Jul 26, 2013 | Cars & Trucks

    1 Answer

    How do you program new spare key for 2007 rodeo RA?


    if its the ignition key it must be done by a dealer and have a lage black plastic head which has got a transponder in it. If you got a blank key cut at the locksmith it will turn the locks but wont start the car. Usually you get the dealer to do both supply ignition key and then get it cut, then they can program it.

    but if your asking how to program the keyless entry remote follow this procedure.
    take note step 5 is different for different year models.


    Make sure that all the doors are closed and unlocked and wait for dome light to go out before starting.


    Insert the ignition key into the ignition switch


    Open drivers door


    3 on/lock


    Close/open drivers door


    Wait 8 secs


    On/lock/on (MY06-07) OR 2 on/lock OR on/lock (MY08)


    Close drivers door


    Hazards flash


    Press remote & keep pressing one button & then the other slowly(2 secs) until locks start working(they wont operate if key is in ignition).


    Hazards flash

    Feb 23, 2011 | Isuzu Rodeo Cars & Trucks

    1 Answer

    2003 Sebring - no power - won't start


    sound like dead battery charge it up

    Jul 05, 2009 | 2002 Chrysler Sebring

    1 Answer

    I need to somehow reset my factory alarm on my 1995 Nissan Maxima


    this is how most nissans program the key fobs.
    get in the car and manually lock the drivers door with the door switch.
    put the key in and out of the ignition about 10 or 12 times until the hazard lights flash once.
    turn the key to the ignition setting so all the dash lights are on,but do not start the car.
    click the lock button on the remote fob.the hazards should flash once to confirm.
    turn off ignition and remove the key.
    unlock the drivers door and open the door.
    the remote should now work.
    if that does not work,the dealer can reprogram the fob with the obd diagnostic system.

    May 26, 2009 | 1995 Nissan Maxima

    2 Answers

    Honda Odyssey 2005 sliding doors won't open, beep 3 times


    If you click once your remote control ,will open just driver side doors.To unlock all of them have to press twice , and then sliders.

    Apr 11, 2009 | 2005 Honda Odyssey

    2 Answers

    How can i open nissan primera's door,


    i have Nissan Primera s manual,03 reg. Battery went dead two days ago, today i tried to open the car with my remote key, it didn't respond as battery was totally dead. I tried to open the door manually with the key,it wont open. Can any one help me please.....?

    Nov 12, 2008 | 2002 Nissan Maxima

    Not finding what you are looking for?
    1999 BMW 328 Series Logo

    Related Topics:

    161 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top BMW Experts

    Anthony Jones
    Anthony Jones

    Level 2 Expert

    128 Answers

    Frankie B

    Level 2 Expert

    65 Answers

    Doberman

    Level 2 Expert

    254 Answers

    Are you a BMW Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...