Question about Mazda Cars & Trucks
New battery no ignition lights at all not even a clicking sound
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1996 TOYOTA 4 RUNNER
Do you have a "Security" light anywhere on the dash? If so, when you change the battery, this activates the security feature. Try this: Cycle the key in the ignition on-off 5 times. This will deactivate the security system (if you do indeed have the Toyota system) Hope this works for you.
Posted on Sep 15, 2008
This is almost certainly a bad starter/solenoid sticking. If you hear the click sound hit the solenoid(NOT the electrical connection!!) on the starter several times with a hammer. If it starts you definitely need a starter. This trick will only work for a few days - so replace that starter.(disconnect battery before replacing it !)
Posted on Apr 19, 2009
Find the relay making the clicking noise by setting your finger on top lightly, then check map on under side of cover for identification.
Posted on Jul 17, 2009
SOURCE: 2005 Mazda 3 won't start;
the battery is low on power. the lights will still light for a bit longer but your engine needs more cranking amps to turn it over. The clicking sound is your starter without enough power. Have someone help you jump the car. or if you have a manual transmission, get the car moving 5mph+ somehow (push or hill) and pop the clutch out with the keys in the ignition in the "on" position. your car will start right up. if your car regularly needs jumped you probably have a bad battery. if your car looses power while driving you have a bad alternator.
Posted on May 03, 2011
A few checks here,,, if the vehicle was otherwise in good working order prior to battery exchange , check that all the "+" cables are connected securely to the battery positibe post. it's unlikely to be the Negative post. Check heavy cable from starter motor is securely connected also. check "nuteral" inhibitor switch on transmission is operational ! Good luck
Posted on Aug 26, 2012
Tips for a great answer:
Sep 10, 2017 | Mazda Cars & Trucks
May 04, 2015 | Mazda 323 Cars & Trucks
Mar 14, 2015 | 1995 Land Rover Range Rover
Jan 23, 2015 | 2004 Mazda Tribute
Sep 02, 2013 | 1990 Mazda 929
Oct 04, 2011 | 2001 Mazda Protege
May 03, 2011 | 2005 Mazda 3
Jan 09, 2010 | 1988 Mazda B2200
Sep 25, 2017 | Mazda Cars & Trucks
23 people viewed this question
Usually answered in minutes!