Question about Cars & Trucks

Open Question

I have pfaff1122,connected cable but does not start.whenpress the foot paddle it gives noise like gunoon.light is there

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 porsche cayenne acceleration when I put foot on gas b paddle it stalls like it sont want to go then takes off really fast car has did this to me several times but this time it went up to 100mph a


You need to take it to a Porsche dealer to have the computer software updated. The sooner, the better! Until then, turn off your PSM (Porsche Stability Management), to see if that helps.

Nov 29, 2014 | 2003 Porsche Cayenne

1 Answer

Left blinker light sticks whenpressing brake


Would check the wires on that light and clean connections if corroded.

Dec 09, 2013 | 2013 Kia Soul

1 Answer

My chevy blazer parking break paddle jammed


spray wd-40 on the gear and teeth mechanisem push the foot feet down for the parking break then pull the release. if that doesn't work then try grabbing the break cable with a vise grips and pull on the cable, the old one might have streached

Jun 03, 2012 | 2000 Chevrolet Blazer

2 Answers

Having trouble with the brakes on my '90 Ford ranger. Replaced the master cylinder and still have very little braking power. Any help would be appreciated!


***Seek out professional help this vehicle is not safe to operate.***


Check the vacuum line going to the brake booster.

This is the big round chamber behind the master cylinder.

Hope this tip helps.

R/
David

Jan 23, 2010 | 1990 Ford Ranger SuperCab

2 Answers

99 dodge ram 1500 4x4. dosen't want to shift from 2 to 3 until you completely let off gas and rpm's drop. any ideas?


your kickdown lever/cable is starting to sieze. lubracate the kickdown cable, then inspect the kickdown linkage as it could be a broken cable clip.

Dec 22, 2009 | 1998 Dodge Ram 1500 4WD

2 Answers

My brake pedal goes hard when braking on my santa fe


Step on brake paddle with engine off, then with foot on brake paddle start engine, brake paddle should go down a few inches, also check for vacum at power brake booster under hood ( sit in back of master cylindre ) if you have vacum there and brake paddle did not go dnow a few inches, replace brake booster.

Nov 20, 2009 | 2004 Hyundai Santa Fe

2 Answers

I have a 96 T100 and I would like to know how to test the Brake Power Booster


if the brake pedal gets hard then the bosster is defective, u may also hear a hissing noise from under the dash.

Nov 12, 2009 | 1996 Toyota T100

1 Answer

How to replace the brake light switch on a 1998 gmc sierra truck


Brake light switch is active by the brake paddle.

Before you start,take a picture or do a sketch of the spring or linkage around the brake paddle.

Move the seat back will give you better access.

Press the paddle and the inner side (closer to the firewall) of the paddle will activate the switch.

Please keep in mind there are fuse(s) to protect the lighting circuit.

Check all the fuses before you R&R the brake switch,

Jul 16, 2009 | 1998 GMC Sierra

2 Answers

1994 Honda Accord EX 5-sp won't start


Recheck those cable connections. Gotta be a loose wire or battery cable connection. Especially when you get nothing when you put key in ignition.

Feb 20, 2009 | 1994 Honda Accord

1 Answer

Making a knocking noise


This is most likely either a piston noise or a connecting rod bearing knock

Oct 05, 2008 | 2000 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...