Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Yes, it has a fuse but I do not have a diagram unfortunately. Or it could be your indicator switch on the inside driver's side of the trunk. The remote will not work if the trunk is already open OR if the switch is bad/not contacting the stopper (at the base of the trunk) and falsley telling the PCM that the trunk is ajar. But if this were the problem, your should be getting a warning that your "trunk is ajar" from the onboard warning display on the guage cluster. The switch is cheesy...had to replace mine.
Posted on Jan 01, 2009
SOURCE: trunk lide wont open
Try to apply pressure from the top of the trunk and push short burst while using the key, If this doese not work you can try to enter from the rear seat taking out the bolts for the rear back rest.
Posted on Jan 23, 2009
It sounds like your latch has double locked. Here is the fun part, can you drop your rear seat and get into the trunk? If you can look for a tag that is possabily glowing pull it to release the emergency latch on the trunk. then with your finger lock the latch and check to see if it is leaving a large enough gap fot your pinky finger to fit in. if it is then you have reset it. if not then pull the emergency release a few more times
Posted on Feb 23, 2009
Using your keyless entry on the keypad, press the 5 digit code to get into the door and press the 6 key immediately after. Lincoln has several codes in addition to the 5 digit keyless entry like pressing the 3 to open all the doors, the 6 for the trunk and pressing the last 2 buttons at the same time to lock the doors.
Posted on Apr 29, 2009
There is a cable that runs from the key cylinder to the latch mechanism. There are clips that hold the cable housing in place, and if one of those comes loose then turning the key just moves the housing without releasing the latch. Check the clip closest to the latch. To get the trunk open drop the back seat, crawl in, and pull on the cable.
It is also possible that the cable is broken or damaged and needs to be replaced -- I assume you will then need to replace the enrite assembly.
Posted on Sep 03, 2009
Tips for a great answer:
Apr 09, 2015 | Cars & Trucks
Jan 02, 2015 | Cars & Trucks
Sep 25, 2012 | 2007 Lexus RX 350 FWD
Oct 25, 2011 | 1997 BMW 328
Apr 02, 2010 | 2001 Audi S4
Apr 03, 2009 | 1995 Jaguar XJ6
Mar 26, 2009 | 1999 Lexus ES 300
Jun 15, 2008 | 1997 BMW 328
13 people viewed this question
Usually answered in minutes!