Question about 2001 Chevrolet Tahoe
First step is to check ALL fuses,with the key on.Use a 12v test light and check then in place.Each fuse will have a small area on the top of each fuse at each end that can be probed with the test light.If both ends show power then the fuse is good.
Posted on May 07, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
as long as nothing is stuck in track and you hear no noise when using switches, look for broken wire at connector or in harness. ck fuse first of course, if blown, something may be stuck in track causing it to stop and blowing fuse
Posted on Nov 16, 2008
this is common, gm has had big problems with the cluster (gauges) on the 2001 to 2005 models but no recalls. to repair this you will need to replace the cluster and some models need programing from the dealer after its installed.hope this helps;.
Posted on Feb 04, 2010
you are probably correct. there are two contacts on the level sensor that wear out, which gives you the fluctuating gauge.
Posted on Feb 24, 2010
Tips for a great answer:
Jun 16, 2015 | 2001 Chevrolet Tahoe
Oct 21, 2013 | 2001 Chevrolet Tahoe
Sep 30, 2013 | 2001 Chevrolet Tahoe
Jun 20, 2012 | 2001 Chevrolet Tahoe
Sep 28, 2010 | 2001 Chevrolet Tahoe
Feb 04, 2010 | 2004 Chevrolet Tahoe
Nov 02, 2009 | 2001 Chevrolet Tahoe
Nov 15, 2008 | 2001 Chevrolet Tahoe
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: