Question about 2001 Volkswagen Passat
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Metra makes a preamp harness that you can use if you have the partial Bose system. My A4 had that (where the front speakers were run off of the headunit with speaker-level feed, but the deck put a line level signal to a rear amp to power the speakers). This harness would let you use the aftermarket deck with your factory speakers, if you have the partial Bose system. Best bet is to do a Google search for "Metra 2001 Passat" or something like that and I'm sure it'll show up.
Posted on Aug 09, 2008
if they have all stopped working but you still have the usual warning lights then the cluster will need changing
Posted on May 07, 2010
The door panel comes off with a T-10 torx or a Hex (Allen) wrench that will fit and a large Philips Screw Driver.. Remove the Plastic cover on the inside Door handle and the screw or screw along the bottom of the door panel. Then remove the screws that hold the handle the the door.They are located behind the plastic plate you removed with a tiny screw driver earlier. Be careful not the mark up the cover whaytprying it up. It is best to pry from underneath. After this 4 screws are out . The Use of a clip tool is best for getting behind the panel to pop it off, screw driver will work. After all the clips are released. Pull the light at the bottom of the panel down and out. Disconnect it or push it back thought the hole it came from. Now you need a 10mm socket, or wrench to remove the 12 bolts that hold the metal plate to the door. Remove all the 10mm bolts, if the window has not already fallen in the door it should be released by removing the black 2" plugs. Then loosen the bolts that clamp the window with the arms. Do not loosen them all the way.Disconect all the wiring. The Door lock cable,can be a pain. I think it pulls down.Next remove the metal plate,that is the regulator. Reverse these steps again to install it.
thank you !!
Posted on May 20, 2010
Tips for a great answer:
Oct 22, 2013 | 2002 Volkswagen Passat
Feb 25, 2013 | 2001 Chrysler Sebring
Sep 25, 2012 | 2006 Volkswagen Passat
Apr 24, 2017 | 2001 Volkswagen Passat
Nov 08, 2010 | 2008 Volkswagen Passat Sedan
Jul 03, 2010 | Cars & Trucks
Aug 09, 2009 | 2001 Volkswagen Jetta TDI
Jun 01, 2009 | 2001 Mercedes-Benz C-Class
Oct 27, 2008 | 2000 Hyundai Accent
Jul 31, 2008 | 2001 Volkswagen Passat
21 people viewed this question
Usually answered in minutes!