Question about Toyota Cars & Trucks

1 Answer

My timing chain broke on my toyota 22re engine did i bend any valves and how do i check? it was idling at the time and it just died i diudnt hear any weird sounds it just died

I think i hear that some motors are no contact and how do i tell if mines that way

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,147 Answers

Don't concern yourself with thinking you may have a bent valve or any other destruction inside. Just replace the timing chain and go on with your life. I've been thru timing chains also, nothing else ever happened. And I know these 22re's inside out, for the past 20 years or better. You just can't destroy them. One I just took of the road for frame repair has over 500,000 miles on it. Replace front main seal and sleeve twice. Anyway, if you've never replaced a 22r chain, get a Hanes manual at any Pep Boys auto parts outlet to find out how to do it. Just be sure to follow the instructions explicitly. You don't want the timing off evn a single tooth.

Posted on May 06, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set ignition timing for toyota 3yeu


How to check and adjust ignition timing: toyota 3.0L - YouTube

? 1:58
https://www.youtube.com/watch?v=pOdFqKxPviA
Dec 3, 2014 - Uploaded by SCOTT BROWN
shown is a 1990 Toyota pick up. It should be generally the same procedure for most early 90's and late 80's ...

How To Check Ignition Timing 22re - YouTube

? 2:08
https://www.youtube.com/watch?v=g-79YITt0YM
Aug 14, 2012 - Uploaded by 612to303
How To Check Ignition Timing 22re ... How to Remove and Install a Toyota 20R 22R 22RE Distributor - Duration: 7:48. by ...22RE Toyota Pickup/4Runner Valve Adjustment - Duration: 26:31. by TheAlexManVideos 68,157 views ... How to Set Ignition Timing on a 1.3L Suzuki Samurai Engine - Duration: ...

Ignition timing adjustment - YotaTech Forums

www.yotatech.com/f2/ignition-timing-adjustment-9882/


Jan 04, 2016 | Toyota 4Runner Cars & Trucks

1 Answer

Front wipers arms going extreamly slow and you can hear the wiper motor maybe a fuse ?


the wiper motor could be the problem. could also be the mechanism
needs a lube or replacing. also, lift the wiper arms off the glass so they stand up then switch on wipers. if goes right , the motor is being overloaded. if still slow, the motor needs replacing.

Apr 09, 2014 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

Wipers stopped working, not a fuse


Your wiper motor or wiper transmission may be bad. If you can hear the wiper motor running, but the wipers don't move, your wiper transmission is bad. If you can't hear the wiioper motor, and you're sure all fuses are good and all contacts are solid, your wiper motor is toast.

Mar 04, 2014 | 2004 Volkswagen New Beetle Convertible

1 Answer

Driver window down and wont go back up. think its off track seem to still hear motor


same problem wit mine on the passenger side.....the gears that move it up and down are made of plastic and wear OFTEN on the ls.....mines bein held up by a peice of wood, the parts i think cost around 60$ and i think its around 3 gears to replace?...dont quote me on the amount or how many gears....hope this helps

Oct 04, 2012 | 2002 Lincoln LS

3 Answers

1995 Olds Silhouette rattled badly, died while running


I think you had better have a local shop inspect this for a failed engine connecting rod.

Aug 23, 2012 | Oldsmobile Silhouette Cars & Trucks

1 Answer

2007 pontiac grand prix rear passenger window will not go up. all other windows work fine


There is a high possibility that that there is either just an obstruction in the way or the motor has failed you or the motor is spinning out and the gear alignment is off. For any of these possible issues, you WILL have to go to a mechanic and there is nothing you can do on your own.

However, since you asked the question I'll try to tell you what I think. If there is an obstruction in the way, the motor will try to spin but cannot so it will be on high load and start to whine. The motor shouldn't be busted because you can hear it. More likely what's connecting the motor to what pushes the window up has come lose. Contact a mechanic if you want to fix this issue.

Aug 20, 2012 | 2007 Pontiac Grand Prix

1 Answer

Timing chain broke, possible damage to heads


Has the timing chain or belt been replaced?? If not you can't check it unless you remove the head(s). If you did bend the valves it is doubtful the engine is destroyed other than needing new valves installed for the bent ones. So the cost would be about $800.00 more if a V6

Jun 20, 2012 | 1992 Toyota 4Runner

1 Answer

2006 Chrysler Town and Country passenger seat won't move front to back right track seems to be jammed


I have exactly the same problem, and I'm searching for a solution. I think there's just one motor for forward-backward, and mine seems to be operating, because the left (inboard) track moves. The motor seems to have two cables that turn in a shaft from the motor... both of my cables seem to be turning. I think the problem is at the end of the shaft or the track is sticking... I can't move it by hand. Wish I could contact you directly.

Apr 16, 2012 | 2006 Chrysler Town & Country

1 Answer

Timing chain broke on my 96 cavalier 2.2 ohv. Replaced the chain and tensioner but now the car runs rough necause of a miss n the car. The motor had to be hoisted up in order to change the timing chain im...


If the chain broke while the engine was running, and I presume it did, it is possible that you may have damaged the valves. When the chain breaks the cam shaft stops moving and the valves stay in their last position. The pistons continue to move until the engine comes to a stop. An open valve can be hit by a piston, sometimes breaking the valve or just bending the shaft. Also you have to be sure the new chain has the cam shaft and crank shaft properly timed. As I understand that that engine does not have timing marks on the chain sprockets. To test for damaged valves, remove the spark plugs and test the compression in each cylinder by cranking the engine while holding the compression gage in the spark plug hole. All the cylinder should have the same pressure within about 15 psi. A cylinder with damaged valves will not have any compression pressure. If you are unsure about the valve timing check into how that engine is timed. I don't have that information but if is out of time it has a very major effect on the engine performance and idle. I hope this gives you a place to start looking for the cause of the mis. Good luck.

Thanks for using FixYa.

Gaker

Jun 22, 2011 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...