Question about Ford Taurus

1 Answer

Where is the PCV valve located 2003 Ford Taurus flex fuel

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 75,197 Answers

It is in the rear valve cover.

Posted on Jul 09, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: pcv valve

I have a 98 4L SOHC . The valve seems to be behind the intake manifold. The emissions diagram shows 2 hoses going to it. Local dealership swears Part #EV225 is correct. You would not believe how much of the internet is devoted to this situation

Posted on Sep 23, 2008

  • 3 Answers

SOURCE: PCV valve location

if i know what you are asking, look at where you put your oil in. on the valve cover to the top right should be a plug with a tubeing runs to your air clear tube where the air mass sensor and carb is located. i think that is what you are looking for.

Posted on Nov 07, 2008

  • 1 Answer

SOURCE: 2003 FORD EXPEDITION PCV VALVE LOCATION

show me a picture. everyone else says it's on the passenger side. nothing white on driver side of my 03 expedition.

Posted on Mar 07, 2009

michigan man
  • 3533 Answers

SOURCE: 2003 cadillac deville pcv valve location?

try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Posted on Mar 21, 2009

Monster80
  • 460 Answers

SOURCE: What is the location of the PCV valve on a 2005

Its in the back of the intake.It points straight towards the windshield way.It has a black hose that comes off from it..If your standing in front of the car looking down at the motor at the middle of the motor look straight back and down just after the intake starts to round down you'll see it..

Posted on Mar 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where the flex fuel sensor of the ford taurus 2001 is located?


You may be speaking of the Fuel Pump/Fuel Gauge Sensor located Under Car On Front Side Of Fuel Tank. I never heard of a Flex Fuel Sensor.

Feb 28, 2015 | 2001 Ford Taurus

1 Answer

Pcv location ford escape 2010 2.5 gas engine


The PCV valve is located under the intake manifold on the non-hybrid 2.5L engine. The intake manifold MUST be removed in order to service the PCV valve.
The PCV valve sits in the crankcase vent oil separator.

May 16, 2014 | 2004 Ford Taurus

1 Answer

Location of pcv valve on 2008 ford taurus 3.5


On 3.5L engines, the PCV Valve is located on the rear valve cover (see pictures bellow). Please note: the PCV valve must be replaced if it's removed. Access to the valve is easier if you remove the upper intake manifold. However, this is not absolutely necessary and if you are already a little mechanically inclined you can do it the way you would replaced any other PCV valve.

    -A 19mm open wrench will make your life a lot easier if the PCV valve is a bit tight. It is in an awkward spot to apply pressure.

    -Disconnect the electrical connector from the valve. There is a small pin or locking device on the wire that you will have to slightly depress for the connector to release.

    -Disconnect the hose from the valve and turn the hose clockwise so that you have a bit of room to work with.

    -Turn the PCV valve counterclockwise and remove from the valve cover. Pay close attention to the position of the valve at the point when it is to be removed. The new PCV valve will go in at that same position. Why is this important? It is possible to install the PCV valve facing in the opposite direction. Once the PCV valve in and locked it in place, it damages the locking mechanism. Therefore, if you remove it you will have to throw it away and purchase a new one.

    -You just saved $130 - $150 to have the PCV replaced at the dealership...

location-pcv-valve-2008-ford-taurus-3-5-cgnwdhiy0mxwbb3xg5zhzgxj-5-0.jpg

Apr 07, 2013 | 2008 Ford Taurus SEL

2 Answers

My 2003 ford taurus gas gauge doesnt work took it to get the emissions done and the car failed they told me it was the fuel sensor where is the sensor located and is it expensive to fix


is it a flex fuel vehicle? if so it's usually the flex fuel module, logated behind the radio and slightly to the left. get a set of radio removal tools(two u shaped wire tools and fairly cheap) remove radio and replace module (also fairly cheap)

Dec 22, 2010 | 2003 Ford Taurus

1 Answer

Where is pcv valve located on 2005 taurus


It is below the egr valve close to the intake manifold below the intake air sensor, there is a tube running to it from the engine to recirculate exhaust air with fresh air, there is a clamp holding it to the air intake that you need pliers to remove, then you need to turn counter-clockwise 90 degrees to remove, do the reverse to install. to make it easier to access remove the upper intake. The pcv valve is not visible, however, you can identify it by the 3" inch long rubber hose that connects to the steel line running into the bottom of the intake. I have the part and am going to replace it soon, although Ford really makes it difficult to remove it -
pcv valve is located just under the throttle body. remove air cleaner assembly from throttle body and you will see a u shaped hose running horizontally.

Jan 27, 2010 | 2004 Ford Taurus

2 Answers

Where is the pcv valve located on a 2003 Ford Taurus SES?


it is located on the valve cover on the drivers side.

Dec 17, 2009 | 2003 Ford Taurus

3 Answers

2003 ford taurus idle problems had trouble codes


A code P0174 may mean that one or more of the following has happened:
  • The MAF (Mass Air Flow) Sensor is dirty or faulty. Note: The use of "oiled" air filters can cause the MAF to become dirty if the filter is over-oiled. There is also an issue with some vehicles where the MAF sensors leak the silicone potting material used to protect the circuitry.
  • There could be a vacuum leak downstream of the MAF sensor. and your solutions are.
    • In the vast majority of cases, simply cleaning the MAF sensor does the trick. Consult your service manual for it's location if you need help. I find it's best to take it off and spray it with electronics cleaner or brake cleaner . Make sure you are careful not to damage the MAF sensor, and make sure it's dry before reinstalling
    • Inspect all vacuum and PCV hoses, replace if necessary
    • Check for a dirty fuel filter and proper fuel pressure

Oct 24, 2009 | 2003 Ford Taurus

1 Answer

2004 ford taurus


You're pcv valve (positive crankcase ventilation valve) is located in the end of the cam cover it will have a hose connecting it to the intake manifold.

Sep 14, 2008 | 2004 Ford Taurus

2 Answers

PCV valve location


if i know what you are asking, look at where you put your oil in. on the valve cover to the top right should be a plug with a tubeing runs to your air clear tube where the air mass sensor and carb is located. i think that is what you are looking for.

Sep 05, 2008 | 2002 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...