Question about Plymouth Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
On a 2.0 unhook the wires from the back of the starter then there are 2 bolts that go through the nose cone of the starter into the block, you remove those 2 bolts and the starter will fall out.
Posted on Jun 16, 2009
The crankshaft sensor is behind the crankshaft pulley or harmonic balancer. You can access this by pulling off your tire and the inner wheel well. Then use an air impact preferably a 1/2 inch or 3/4 inch impact to loosen the bolt. Next you will need a pulley puller to got it off the sensor is directly behind the pulley make sure you set the sensor to where the old one was set at.
Posted on Feb 23, 2010
most starters have only two mounting bolts,i recommend disconnecting your negative battery terminal,remove the mounting bolts diconnect the solenoid wires
Posted on Jun 22, 2010
Tips for a great answer:
Aug 27, 2014 | 1999 Plymouth Breeze
Jul 19, 2013 | 1999 Plymouth Breeze
Jul 17, 2012 | 1999 Plymouth Breeze
Jun 04, 2012 | 1999 Plymouth Breeze
Jun 06, 2011 | 1999 Plymouth Breeze
Feb 10, 2011 | 1999 Plymouth Breeze
Jun 19, 2009 | 1999 Plymouth Breeze
25 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: