Question about Dodge Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The sensor is right next to the heater hose outlet on the front passenger side of intake manifold. It is very small with an oval shaped connector going to it. I have the same engine.
Posted on Oct 21, 2008
located under intake in water crossover pipe,you can access the sensor by removing intake chamber box,then pcv hose connected to the block,the connector is orangeish 2pin,use a 19mmdeep socket on a 3/8 ratchet to get it loose,make sure engine is cool,also make sure there is a new brass washer with your new sensor,sometimes the old washer comes off when removing the sensor,sometimes it sticks to the pipe,some coolant will escape so make sure to top it off
Posted on Jul 14, 2009
1997 Plymouth Neon, have replaced radiator, radiation cap, thermostate and hoses, still run hot. Fans do not seem to come on, where is the temperature sensor on this vehicle?
Posted on Sep 03, 2009
Tips for a great answer:
Oct 07, 2016 | 2012 Dodge Avenger
May 29, 2016 | 2012 Dodge Avenger
Dec 08, 2015 | Dodge Cars & Trucks
Jun 18, 2015 | 2012 Dodge Avenger
Oct 21, 2012 | 1997 Dodge Ram 1500 Club Cab
Oct 27, 2011 | 1996 Dodge Avenger
Sep 23, 2017 | Dodge Cars & Trucks
46 people viewed this question
Usually answered in minutes!