Question about Cars & Trucks

Open Question

CHANGE TAILLIGHT BULB - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change a taillight bulb on a 1986 dodge aries station wagon


Tail light problem '1986 Dodge Aries 4 Door - faqqq

www.faqqq.com/.../tail-light-problem-1986-dodge-aries-4-door-123242...
Question Product: 1986 Dodge Aries 4 Door Question Details: Tail light problem I ...Most people suspect a bad bulb and when they go to change it, it lights up.

Oct 16, 2015 | Dodge Cars & Trucks

1 Answer

How to change breaklight bulb


Open rear hatch and remove the 2 screws holding in taillight assy. Grab taillight firmly and wiggle off. Remove bulb socket and replace bulb. Reassemble in reverse

Apr 10, 2015 | 2000 Ford Windstar

1 Answer

HOW DO I CHANGE A REAR TAILLIGHT


very simple, open the tailgate you will find 2 torx head screws , undo them and then pull the whole taillight unit out the twist the light socket to the left to access the bulb you need a push in bulb the repeat the process to in stall the unit!

Sep 11, 2014 | 2004 Dodge Durango

1 Answer

How do you change tail light bulb on 1997 Dodge Intrepid?


In the trunk. You will find black plastic wing nuts that hold the felt panels in place, remove and pull back the panel pieces and you can now access the taillight assembly, if you can't access the bulbs from that point you need to remove the tail lights by un bolting the 10mm nuts holding the taillight assembly then remove the taillight from the car now on the outside you should be able to access the bulbs from there by turning the bulb plugs about a 1/4 to a 1/2 turn, reassemble the taillight and interior panels.

Aug 28, 2014 | 1997 Dodge Intrepid

2 Answers

When i turn my headlights on, all of my tail lights go off.


THere is a short in the dashboard switch for the lights. Change the switch or just remove it and find the short!

Jan 01, 2013 | 2000 Jeep Grand Cherokee

1 Answer

Change taillight bulb


You can replace it by yourself, buy the taillight bulb from http:www.obd2express.co.uk

Oct 23, 2012 | 2003 Mitsubishi Lancer

1 Answer

How do i change out my rear brake light bulb


Instructions on how to change the bulbs should be inside your owners manual.But here you go;

Lift the tailgate and ensure that it is properly supported.
  • 3 Remove the two screws at the top of the taillight assembly with a Phillips screwdriver. Set both screws together, to the side of your work area.
  • 4 Grasp the taillight assembly horizontally on the left and right. Slowly pull the assembly toward you and away from the truck's frame. Use care while you're pulling the taillight assembly as there will still be wiring connected to it. Once the assembly is away from the frame lay it down on the bumper.
  • 5 Remove the brake light socket from the taillight assembly. Rotate the socket a quarter-turn counter-clockwise to unlock it from the assembly. Withdraw the socket slowly from the hole on the taillight assembly to avoid breaking the brake light bulb.
  • 6 Remove the brake light bulb from its socket by grasping it between three fingers and pulling it straight out of the socket. Put on some latex gloves before you touch the new brake light bulb.
  • 7 Place a small hairline bead of dielectric grease on the metal contacts at the base, on both sides of the brake light bulb. If the grease gets anywhere on the glass portion of the bulb, discard it and start with a fresh bulb. This grease is not absolutely necessary.
  • 8 Insert the brake light bulb back into its socket. Push down on the bulb gently until it seats itself.
  • 9 Now that it's connected carefully insert the bulb into the socket back through the hole on the taillight assembly. Lock the socket back in place by rotating it a quarter-turn clockwise. Do not over rotate the socket. When it locks in place, you stop rotating.
  • 10 Lift the taillight assembly up off the bumper. Position it so that it's ready for re-installation. Push the assembly back into place on the frame. Make sure that all of its wires are tucked back behind it and that no wires get pinched.
  • 11 Reinstall the two mounting screws and tighten them a quarterturn past hand tight. Shut the lift gate door.
  • Jan 19, 2011 | 1997 Mercury Mountaineer

    3 Answers

    How do you get to the taillight bulb to change it


    Here's a great video that will show you how to remove the taillight bulbs through the trunk.">

    Sep 29, 2009 | 2002 Chevrolet Monte Carlo

    1 Answer

    Change brake light on 2006 Xterra


    After you remove the 2 bolts there is 2 cone shaped tensioners that help hold the taillight housing on. Grab the taillight firmly on the top and bottom, and pull it straight towards you until the tensioners pop. They will not be damaged and are made to pop in and out.
    Then find the bulb housing of the burnt bulb, turn the housing clockwise, and remove the bulb housing, remove the bulb by pulling on the black base of the bulb only on the short sides on the housing. (DO NOT pull on the glass, as it may break in your hand). Then slide the replacement bulb into the housing (it can go in either direction), and repeat the steps in reverse order. to put the housing and taillight back on.
    Be careful to tighten the taillight bolts by hand only, they have a plastic thread sleeve that is easily stripped by a drill.

    Apr 18, 2009 | Nissan Xterra Cars & Trucks

    1 Answer

    Taillight failur switch


    did you look in the trunk hinge left side where the wires go into the backseat area of the trunk

    Mar 16, 2009 | 1993 Toyota Camry V6

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    15 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...