Question about Cars & Trucks

Open Question

I am looking for answers/diagrams on my 1976 sea king 7.5 hp gear shift assembly. I think I'm missing a part. I figured out pretty much how it shifts but can't figure out how it all connects thanks,cw

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 178 Answers

SOURCE: 1988 honda accord lx-i gear shift panel lights

hello first you need to check the bulb below the gear shift panel that is not blown then if available your book on your car has a listing page usually in back look for fuses go to page it should have a diagram for fuses see wich one is for illumination of your shifter check fuse replace if needed goodluck

Posted on Sep 18, 2008

  • 53 Answers

SOURCE: gear shift

there is a shift lock over ride button located just to the left of the shifter u have to remove a small piece of plastic to pop out then push a ball point pen through the hole and push down this will unlock the shifter. check to see if your brake kights are working as these cars have a issue with the brake switches which will cause this problem if there is no brake lights replace the brake light switch

Posted on Oct 18, 2008

tommyboinow
  • 324 Answers

SOURCE: 1994 nissan altima gear shift lockout problem

replace the brake pedal switch, it is mounted in front of the brke pedal, this is what makes the silanoid work, if it is not working the silanoid will not.

Posted on Nov 26, 2008

  • 67 Answers

SOURCE: my 1994 ford econoline van is not shifting gears

Hello.
This a repair for a transmission shop. Sounds like the pumps are bad inside the transmission. Thats the worst option I have.
It also can be a poor shift linkage adjustment. And the last solution can be the speed module that tell the transmission when to shift.
Goodluck! I hope this helps!

Posted on Dec 07, 2009

eric772001
  • 1 Answer

SOURCE: my 2002 dodge neon wont shift out of first gear

I have the same problem. I replaced the input and output speed sensors as well as the transmission shift solenoid. Still wont shift out of 1st and speedometer still wont work but tack does. Any Suggestions?

Posted on Mar 03, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 Pontiac Bonneville GXP will not shift into 4th gear I was to it was a fourth gear band but is that the only problem that will cause itI'notto shift into 4th gear


Which transmission does yours have 4T65-E or 4T80-E ?

4T80-E
No Fourth Gear

Checks

Causes

1-2 Shift Solenoid Valve
?€¢
Inoperative
?€¢
Debris
?€¢
Pinched wires

3-4 Shift Valve Bore Plug

Misassembled

4th Band

Burned, slipping, missing

4th Servo Cover

Cracked

4th Servo Pin

Broken, seized

4th Servo Piston

Damaged

4th Servo Seals

Rolled, cut or damaged
4T65-E
Slipping or No Fourth Gear
Slipping or No Fourth Gear Checks
Cause

DEFINITION: A large engine RPM increase is noted in fourth gear, Drive range, with little or no vehicle forward speed increase. First, second, and third gear operation are normal. Shifts into fourth gear are soft or do not occur. Fourth gear ratio is 0.705:1.

Automatic Transmission Fluid Level
Low fluid level

Transmission Main Line Pressure
Low transmission main line pressure

Oil Filter Assembly
• The oil filter assembly (100) is missing, plugged, or damaged.
• The oil filter seal assembly (101) is missing or is damaged.

Control Valve Body Assembly
• The 3-4 shift valve (362) or the 4-3 manual downshift valve (360) is stuck or binding.
• Debris is found in the passages of the control valve body (301) or of the control valve body spacer plate and gasket assembly (396)

Case Cover Assembly
Distortion or damage occurs at the manual valve (404) or at the case cover (401), causing PRN oil leak.

Driven Sprocket Support Assembly
A plugged third clutch oil passage in the driven sprocket support assembly (609)

Fourth Clutch Assembly
• The clutch plates (500-502) are worn, damaged, or misassembled.
• A missing or not seated fourth clutch spring retaining ring (601)
• A damaged spring assembly (602) or piston (603)
• Worn or damaged fourth clutch piston seals (604, 605)

Third Clutch Sprag Assembly
• The sprag (720) was misassembled or backwards on the inner race (661).
• A damaged third clutch sprag assembly (653, 661, 719-721)

Dec 06, 2015 | Pontiac Cars & Trucks

1 Answer

Why cant I shift my 99 mercury sable sedan into gears from the steering column anymore? Why do I have to put it on the gear I need, put on the emergency break, then have to get out to shift it into g


Sounds like a shift cable or rod broke. This is dangerous as you probably figured out. Some emergency brakes do not work well for Reverse either. There is so little fabric on the Emergency brake that you are lucky it still works for you.

There is a safety lockout on the gearshift which requires a foot on the brake pedal. Otherwise you could just move the gearshift back and forth and see that the shifter is no longer connected to the transmission.

Look at some autoparts sites for the shift cable assembly. Once you see what is a good assembly you should be able to see where yours is broke. Youtube may have a video to show how to repair your car.

Jul 31, 2014 | 1999 Mercury Sable

1 Answer

Replace shift modulator 1979 cadillac coup deville


The governor likely failed. Not a difficult part to find or replace.

Apr 14, 2014 | 1976 Cadillac Deville

1 Answer

Currently my 1999 SL1 Saturn will not change gear, and I mean that the shift stick doesn't register there being any gears at all. It's stuck in third gear when it broke and now I'm trying to...


YOU NEED A HAYNES REPAIR MANUAL IT CAN HELP YOU, YOU HAVE TO REMOVE CONSOLE, PUT SHIFT LEVER IN SECOND GEAR AND DISCONNECT THE CABLE END FROM THE LEVER.DEPRESS THE TWO TABS ON THE CABLE HOUSING USING PAIR PLIERS REMOVE THE CABLE FROM THE SHIFTER.YOU HAVE TO MOVE CARPET UNDER DASH AWAY FROM SHIFT CABLE,YOU HAVE TO GO UNDER HOOD REMOVE AIR INTAKE DUCT ASSEMBLY DISCONNECT THE CABLE END FROM THE SHIFT LEVER ON THE TRANSAXLE YOU HAVE TO DEPRESS THE TWO SHIFT CABLE HOUSING RETAINING TABS AND DETACH THE CABLE HOUSING FROM ITS BRACKET ON THE TRANSAXLE.

Aug 09, 2011 | 1999 Saturn SL

2 Answers

Need diagram for 1976 chevy pick up auto trans. shift indicator diagram


I took the front off of the dash board and found the cable runs on a track inside the dash that is part of the molding.

Jan 03, 2010 | 1983 Chevrolet K1500

1 Answer

I have 94 chevy pick up work truck. its stuck in 1st but reverse is fine . its just not shifting i changed fluid filter . and it jump pretty bad when i put it in drive. i think somethings stuck or...


YOU COULD HAVE PROBLEMS IN GOVERNOR.THE GOVERNOR VALVE STICKING.GOVERNOR DRIVE GEAR WORN DAMAGED OR RETAINING PIN MISSING.GOVERNOR WEIGHTS OR SPRINGS BINDING MISSING OR DAMAGED.YOUR 1 - 2 SHIFT VALVE IS STICKING.

Oct 31, 2009 | Chevrolet Crew Cab Cars & Trucks

1 Answer

I can`t change gears the gear lever has gone limp it feels like a clutch or clutch cable I neen a diagran og gearbox


Standing in front of the car walk around to the passenger side and look in to where the gear shift arm comes through the fire wall you will see a gear shift tube bellows with a clamp and bolt coming through and at the end you will see the "gear shift guide control"(7) there is a "gear shift control mode" (6) that clips over a round ball at each end one clip faces front and one back ,one towards the middle of the car and one closer to the passenger side of the car , this had come undone at both ends and dropped off, by replacing this the problem was solved.
The part numbers ( 7 ) and ( 6 ) are from a shift linkage diagram pages 21 and 22 found on the internet through http://www.daewooclub.cook/forums/showthread.php?tid=1002
I hope this is of help to someone else out there
Gary

Feb 20, 2009 | 2000 Daewoo Nubira

2 Answers

My sunfire is not shifting properly....


I had a similar problem except i could shift to first and third and fifth but not 2nd or 4th or reverse. the only thing that came to my mind was new transmission but that is not the case. It was a way i could but it was so frustrated. I am certain it is the shifting cables. The name of the part you need to get is TRANSMISSION SHIFTING CABLES. Only the dealership has them, about $200.00 got them and installed but a certified mechanic. I have no problems shifting into any gear at all. Hope this information helps. Any info contact me at yellowise20@aol.com

Aug 26, 2008 | 1997 Pontiac Sunfire

1 Answer

1988 honda accord lx-i gear shift panel lights


hello first you need to check the bulb below the gear shift panel that is not blown then if available your book on your car has a listing page usually in back look for fuses go to page it should have a diagram for fuses see wich one is for illumination of your shifter check fuse replace if needed goodluck

Aug 09, 2008 | 1988 Honda Accord 4 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...