Question about Cars & Trucks

Open Question

Need to install trailer lights - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Trailer lights don't work


The TPMS has nothing to do with trailer wiring. Are there any trailer lights /working and what kind of vehicle do you have

May 09, 2015 | Cars & Trucks

1 Answer

I have a 2002 E 150 with the trailer light system already installed. The van lights all work but only the right trailer turn indicator light does not work. I have checked the problems thru the system and...


The trailer lights on your van should be fused independently of the vehicle lights if you have the factory wiring. There is a fuse junction block under the hood [should be in the left corner somewhere] and in that you should find the fuses for the trailer lights and other functions. This is from memory but check fuses #5 and #6, [10 amps fuses] and see if they are blown. I could be wrong on the numbers so you might have to check them all. Usually its the trailer that causes these fuses to blow so if you find a blown fuse replace it and make sure it doesn't blow again by testing all the lights with the trailer unhooked. If that's ok then hook up the trailer and check again. If it blows with the trailer hooked up then you probably have a short circuit in the trailer wiring somewhere. Good luck, hope this helps!

Jul 21, 2010 | 2002 Ford Econoline Cutaway

1 Answer

I purchased a trailer that did not have any wiring on it what-so-ever. I purchased all of the required parts (i.e. trailer flat four wiring harness, new trailer lights). I wired the trailer with the...


When this happens it is usually a bad earth on the trailer.But hey,check the car also.Check inside the trailer lights for a bad connection.It is an earthing problem.Mate.I hope this helps.

Nov 02, 2009 | 2008 Jeep Wrangler

1 Answer

I have a 2004 jeep grand cherokee i installed a 4 way flat plug for a utility trailer. I installed as instructions said but have no brake lights on the trailer, Everything else works. can you help me?


you will need to add an trailer light adaptor for this vehicle. this adaptor will combine the brake and signals from two separate sources. this unit can be purchased at walmart, Canadian Tire, Partsource, autozone. trailer shops. it will fix your issue. or purchase the vehicl specific kit for your Jeep.

Sep 12, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Trailer brake controller problem


I found the problem. Talking with a technician from the controller company, we determined that it was a fuse problem. I found that the fuse to the CHMSL was blown.


Jun 30, 2009 | 2003 GMC Sierra 1500

2 Answers

1999 ford windstar trailer light install


use the tow connector located behind the tire jack mount at the rear :)

Mar 22, 2009 | 1999 Ford Windstar

1 Answer

2004 F250 No brakelights/turn lights on trailer


You will need to get a 12 volt test light and check the trailer connector for a voltage signal to the trailer, it may also have seperate fuses under the hood for the trailer lights if the system is factory installed, federal law requires the 2 systems be isolated, if there are blown fuses find the short in the trailer before replacing fuse(s), with no exceptions the short is always in the trailer. Hint, check the fuses 1st.

Jul 28, 2008 | 2002 Ford F250 Super Duty SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...