Question about Cars & Trucks

Open Question

97140T lighter Have this lighter is it old and when was it made

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I'm working on a 2000 olds intrigue. Lighters stopped working.. The fuses don't say anything like lighter or aux. So I looked at them all and none are blown.. Is there an in line fuse?? If so were

John, Open passenger door wide, fuse box, passenger side end of dash, under removable trim cover.
The fuse marked Cigar Ltr./Aux.Pwr. 20 amp. is the fuse you want to look at. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
2000 olds intrigue cigar lighter fuse Google Search
Where is the fuse for your cigarette lighter located at for your 98...
Where is the fuse for your cigarette lighter located at for your 99...

May 11, 2016 | Cars & Trucks

1 Answer

How to replace a cigarette lighter socket

Easiest thing on a car. The new cigarette lighter socket is provided in two pieces, which unscrew from each other. The original socket is exactly the same.
All you need to do is disconnect the positive power lead from the back of the old connector, unscrew the back of the old socket, remove the two pieces of the old socket from the ashtray assembly, put the new socket in place exactly as the old one was, and reconnect the positive power lead.
Should take you no more than five minutes.

Aug 24, 2014 | Cars & Trucks

1 Answer

How to change cigarette lighter in 2012 accent

If your cigarette lighter is not working, be sure to check the fuse. other wise, replaceing the lighter is reasonably easy, if you can get to it. all you have to do is unscrew the housing from the inner section, remove the old lighter and replace with a new one. most wireing is a simple plug in. If you are unsure how to access the lighter, a haines or chiltons manuels for your model should be able to show you how to access it.

Aug 06, 2014 | Hyundai Accent Cars & Trucks

1 Answer

86 olds cutlass and the Radio's clock/cig lighter fuse blown. Change fuse and it blows immediately. Also a leak when raining into pass front floorboard. Is there an easy fix or a complete electrical...

Depends whether you want the clock or the cig lighter try disconnecting the lighter and if the clock still works it is more than likely something in the lighter.they are inexspensive to replace.

Nov 21, 2010 | 1986 Oldsmobile Cutlass Supreme

1 Answer

How do A wire a replacement lighter when the old one is no longer there?

Is any of the wiring still there behind the ashtray? It just takes two wires. One all time power and one ground

May 12, 2010 | 1991 Chevrolet Caprice

1 Answer

How do A wire a replacement lighter when THe old one is no longer there?

The red wire on the replacement lighter is the hot wire. Hook it into the fuse panel if you can't find the old lead from the original lighter. If there is a black wire on the new lighter it is a ground. If there isn't a black one you may have to install one to ground the lighter depending on how you mount it. Just hook it up to the nut on the lighter and ground it.

Mar 19, 2010 | 1991 Chevrolet Caprice

1 Answer

I'm Replacing the cigarette lighter in my 98 toyota corolla and i need to know which are the red and black wires i need 2 connect the new lighter(blew my old one.) And both wire's i see are yellow.

Get a tester and check the one which has 'live' current connect it to the center point of the lighter(positive)and the othe r one to the body sid eof the lighter (negative).

Nov 28, 2009 | Toyota Corolla Cars & Trucks

2 Answers

The cigarette lighter does not work on 1998 Olds Cutlass

It could be the plug on the back side of the lighter has come loose or is not making a good connection. It also may be the fuse, But if it has worked before, and doesn't now it is most likely the connection. You would need to take a section of the dash apart to get to it, but it's not too bad. Hope it helps.

Aug 09, 2009 | 1998 Oldsmobile Cutlass

1 Answer

Replacing cigarette lighter in 1989 Jeep Wrangler

Usually you need to be able to reach the back side of the old cigarette lighter to unscrew it and unplug it from the dash... undo the wiring and slide the new one in... really simple.... good luck

Apr 08, 2009 | 1989 Jeep Wrangler

1 Answer


It has a large sheet metal nut at the back of the lighter, you need to access this and then unscrew it to remove te old lighter receptacle.

Oct 17, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides