Question about Cars & Trucks

1 Answer

How do I access low pressure A/C port on 2010 3.6L Lacrosse? What must be removed to gain access, or am I approaching it wrong? Need to recharge refrigerant. Live in FL, so desperate. Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 1,045 Answers

If you can see the lines going to the ac dryer you can just buy a can of R134A , which comes with a fitting to go on the low pressure line only, and plug it in and start the car and the system will draw in the Freon. Now the engine may have beauty covers over the engine and you will have to remove a bolt or two that hold them and then they just lift off, you can see the guide holes to replace them after you remove.

Posted on May 06, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A/c port to put coolant in?


The "low pressure" port. It's the only place the connector on the recharge kit will fit. There will be two ports under your hood, "high" side and "low" side. They have different connectors so you can't get them on wrong.

May 17, 2015 | Cars & Trucks

1 Answer

What is the location of low pressure port on a 1996 eagle vision tsi?


Usually close to the drier in the tube on the low pressure side. Drier looks like an aluminum cylinder about as big around as a soda can and twice as tall with two aluminum tubes coming out of it. The port has a screw off cap to access.

Jul 31, 2014 | 1996 Eagle Vision

2 Answers

Where is the ac Low port 2007 ford edge?


The low pressure port is either on the black oblong canister or very close to it. Automakers usually put the high pressure side closer to the radiator. The ports are different sizes so the refill connections should not fit each other, making it harder to connect the wrong port.

Jul 28, 2014 | Ford Edge Cars & Trucks

1 Answer

Picture of low side ac port on 2001 buick regal


You low pressure port is against the firewall just below the center of the cowl and is best accessed from the drivers side

Jun 30, 2012 | 2001 Buick Regal

1 Answer

Location of low side a/c service port


The low side port is located in the low pressure side of the AC system, this is the larger of the two lines comming from the compressor.

Jun 07, 2012 | 2005 Dodge Durango

2 Answers

Where,exactly, IS the low line port for recharging the AC on my 2003 Chevy Malibu? OR is the coupler that came with the recharge kit the wrong size? I've assumed that most AC units have a standard...


You found the high side port. The other line should have the low side and if it is not on there it might be at the AC evaporator which is a cylinder shape made of aluminum. The cap will have a L on it not a H. Do not force it on the high side.

Jun 12, 2011 | 2003 Chevrolet Malibu

1 Answer

Trying to recharge my A/C in chevy tahoe 2000 cant find the valve where i need to attach to.


The low pressure side port is located somewhere on the 'thicker' plumbing vs. the 'thinner' plumbing coming off of the compressor.

The pressure should be 25psi to 45 psi when the compressor is running.

You can't connect the low pressure hose with a can of r134a on the wrong side (high side vs. low side) because the ports are a different diameter (size).

It may be on the accumulator as well, the canister looking part of the a/c plumbing.

Aug 19, 2010 | 2000 Chevrolet Tahoe

1 Answer

Where is the R-134a vapor port on a 2004 Gallardo?


THERE IS AN ACCESS PANEL UNDER CAR INFRONT OF N/S/F WHEEL. REMOVE 4 SCREWS, BOTH PORTS ARE THERE!

Sep 22, 2009 | 2004 Lamborghini Gallardo

1 Answer

Can't find the fitting to recharge the air conditioner


  • The low-pressure service gauge port valve is located on the suction accumulator.
  • The high-pressure service gauge port valve is located on the LH top of the condenser core.

  • To access the low pressure port you have to remove the right front wheel and inner fender.

    Apr 05, 2009 | 2001 Ford Focus

    1 Answer

    Low pressure port to recharge ac in 97 pontiac grand am


    I just found it. you need to go under the car it's just in front of the oil pan. Now Im going to try to recharge it.Wish me luck.

    Aug 15, 2008 | 1996 Pontiac Grand Am

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    32 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...