Question about Cars & Trucks

Open Question

Trying to replace the front body plastic 2001 aprilla its strew that i think is stoping from coming a part.. plese help ...what is the side strew

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: lower body side cladding or molding im trying to find the piece on the front passenger door

I am parting several 93-97 Intrepid, Intrepid Sport, and Intrepid ES....which part of the ground effects do you need, door part(which door) or the rocker panel part (front or rear, left or rght)....email me at convert63@hotmail.com

Posted on Jun 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to replace entire drivers side headlight assembly on '95 toyota celeca Gt


the FSM covers this.
or alldata.com
you posted a Celica to a Acura forum so that is confusing.
the page is see now, online is for HL adjustment
i see them taking off the cover infront (top)of radiator
and not the HL cases is in full view, you try that yet.?
some cars have fender inner wall plastic skins that most come off
or the front bumber skins
try a real FSM or alldata.com, under body electrical +HL

Feb 27, 2014 | 2001 Acura 3.2TL

1 Answer

Body control module location


Look under carpet in front of car either driver side or passenger should be inside a black plastic box

Jan 11, 2014 | 2001 Audi A6

1 Answer

False temp reading


you will find that there is nouthing wrong all that is a bad reading due to a faulty body earth! seen it all before! just check your body earth points it will be one of those loose! or corroded!
think it's one underneeth the drivers side foot well plastic pannel I think? but it is definetly one of them stop worrying! you will find it easy now you know what it is!
Hope that helps (shuld do!)

Mar 10, 2010 | 2001 Mercury Cougar

2 Answers

Changing battery in 2001 Intrigue


Remove the body brace over it. 1 bolt in the back, 2 in the front. Remove the battery mount. One bolt on the front of the battery (kind of faces the engine). Disconnect the battery lift out, replace. Reverse disassembly.

After removing the front bolts from the chassis crossbar, loosen the back one(s) so it will swing out of the way. You can squeeze the plastic retainer holding the front wire harness to release it, then it's just a matter of (carefully!) wiggling the battery into position to lift it out.

Jan 15, 2010 | 2001 Oldsmobile Intrigue

1 Answer

'03 Dakota stalls when shifting out of reverse


Drop the evap cans and replace the hoses on top. I have a 2001 with the 5.9 with similar issue. the cans on mine are passenger side outside frame rail in front of rear tire. also replaced a couple hoses in line on top of passenger side fender under the hood. One short hose on the front of the throttle body under the air filter. Spent $10-$12 at autozone with hose left over. The long plastic hoses on mine looked like they had already been replaced.

Aug 19, 2009 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

Wiring diagram for cadillac catera 2001 need to download free diagram radio and stero shut off occasionally which also locks trunk and fuel door


It is the BCM (Body control module). The radio is married to it via the serial number. You need to replace the module (lower right kick area, pass side in front of front door, behind plastic...aluminum box), and have it programmed to your car through a Tech 2 diag system.....dealer...this unit controls just about everything apart from the brakes, engine and tranny which all have their own computer. You probably have issues with the sun roof if you have this option.

Jul 16, 2009 | 2001 Cadillac Catera

2 Answers

We have water in right front and rear floor. We have had the doors checked, the air conditioner lines were changed. The water comes in while driving in the rain, but does not drain out. There is about 4...


Remove all 4 door panels and check the plastic sheet water deflectors, This layer of plastic is necessary to keep water from running into car. Pay attention to the bottom edge and up about 8 inches on the front and back edges. if there are any bubbled or loose sections, they need to be sealed using a body grade sealer(No Silicone)

Jun 15, 2009 | 2001 Pontiac Bonneville

1 Answer

FRONT GRILLE


I just took mine off, they are held in with body push in pins (plastic), just pull straight out and they will release.

Dec 17, 2008 | 2001 Suzuki Grand Vitara

1 Answer

How do i replace a passenger side mirror on a 2001 ford focus


Interesting and fairly easy to do. I pried off the black plastic interior trim piece by simply pulling carefully on the end facing the windshield, then pulling at the back end. Came off fairly easily. Once off, I could see the wire connector. The mirror has a short wire which goes through the body of the car and connects to the wire connector which comes from inside the door. I did have to take out the two screws holding the front part of the door panel. This was to weave the wires back through because the go below the top of the door panel through the door body.
Once that was done I found the main screw through a barely big enough hole in the door and took that out.
Once that was off, all I had to do was take out one more screw that goes through the front metal body of the door into the mirror assembly.

It was just a process of weaving the wire back through the door, then I installed the front small screw next to hold the mirror in place, then I put in the big screw that really holds the mirror on, connected the wire back together and put the screws back into the door panel. Snap on the inside plastic piece and you're done.

It took me about 30 minutes or so and I had never done it before.

Nov 13, 2008 | 2001 Ford Focus

2 Answers

Front drivers side window


I had the same problem. A new window motor was need; I can't remember exactly but it wasn't too much...just don't go to a Ford dealer!

Jul 29, 2008 | 2001 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...