Question about Cars & Trucks

Open Question

1992 jd 870 put it in gear let out clutch wont go

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 139 Answers

SOURCE: 1992 Honda Prelude Clutch

Either your master or slave cylinder is leaking (if hydraulic) Replace leaking cylinder with repair kit and blead the system. More serious it could be a problem on the clutch assembly.

Posted on Jan 09, 2009

  • 1 Answer

SOURCE: 1992 YJ clutch fluid disapears.

It's probably your slave cylinder. On my '89 it was located in the clutch housing. You have to take the tranny off to get access to it. This is probably why the fluid is "disappearing." I'd suggest changing the clutch while you're at. They sell kits for this at auto parts stores.

Posted on Feb 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont shift right


we cant guess the tranmission. sold with car new.
ever.
I can't to me , is that its stick shift car. is it?
the problem is a bad clutch actuator (pedal to clutch main)
or bad clutch.(drags) yours is dragging , only why remains.
inspect the clutch cable yet>? and adjust free play per the book.?

the car is really an Isuzu Impulse minus some of that car's more expensive features.
Geo dead
Isuzu dead, double dead car..
the online books (alldata.com) show a clutch cable
buy a new one , i bet this one is EOL. end of life.
remove it install it and set the free play right.

Dec 05, 2015 | 1992 Geo Storm

1 Answer

1992 s10 5 speed transmission which 4th gear only works


4th gear in a box is straight through from clutch to tail shaft. All other gears get the movement from the cluster shaft so if you have this problem I would be checking the oil for metal as there may be bearing failure on the shafts.

Apr 04, 2013 | 1992 Chevrolet S-10

1 Answer

Have replaced the clutch kit and the jeep still wont go into gear why


DOES IT GO INTO GEARS WHEN STOPPED AND ENGINE OFF?IF YES THEN IT SOUNDS LIKE POSSIBLY BLEEDING THE SYSTEM IF HYDROLICK SYSTEM ORLINKAGES MIS ALIGNED OR BENT.GOOD LUCK.ALI

Jun 14, 2012 | 1992 Jeep Cherokee Sport

2 Answers

92 acura vigor clutch replcd still wont go in gear


Is all the air bled out of the hydraulics??

I would then suspect a faulty clutch component.

Was it like this before the overhaul??

Mar 10, 2010 | 1992 Acura Vigor

1 Answer

After being stored clutch willnot engage


do you mean wont disengage? does the pedal feel normal, or like its pushing nothing?cant put it in gear? or goes in gear but wont move?. if you put it in gear but car wont move, the clutch is toasted. if you can put it in gear with the engine off, but not when its running, check the clutch master fluid. if its low or out, then the slave or master is leaking and you will need to replace both. if the clutch arm IS working, and the pedal feels normal, sometimes you can put in gear, and start it with the clutch pedal depressed and drive it, and goose the gas to "break the disc loose"

Oct 14, 2009 | 1997 Suzuki Sidekick

1 Answer

Manual transmission wont go into gear unless engine is off. Starts fine, air runs. Feels like it is locked out of gear. Don't know if it is clutch or transmission


if you have to shut off the car to get it in gear then you either need to adjust the clutch or repair the slave cylinder.check your fluid level for the clutch,owners manual will tell you how.

Aug 23, 2009 | 1992 Isuzu Rodeo

1 Answer

Cant shift unless i compression shift


Chances are pretty good your clutch is toast ! If your truck has a hydraulic clutch , in which mine doesn't , get a friend to pull the boot off of the clutch fork , and with a light , make sure it is disengaging the clutch at all . If you have a mechanical clutch , simply adjust it out til the problem goes away . Look forward to a new clutch very soon ! good luck !!

Apr 20, 2009 | 1992 Chevrolet C2500

1 Answer

My 92 honda accord will not go into 1st 3rd or 5th gear


check shift fork adjustment. make sure you bleed the slave cylinder.also check shift cable adjustment.

Apr 11, 2009 | 1992 Honda Accord

1 Answer

1992 ford explorer manuel transmission getting it into gear


Try putting it in 2nd, then 1st, if that works, sounds like you clutch is bad or defective. 1st gear has no syncro to slow the gears down, 2nd, 3rd, 4th, 5th do.

Mar 28, 2009 | 1992 Ford Explorer

1 Answer

1992 Honda Prelude Clutch


Either your master or slave cylinder is leaking (if hydraulic) Replace leaking cylinder with repair kit and blead the system. More serious it could be a problem on the clutch assembly.

Jan 05, 2009 | 1989 Honda Prelude

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...