Question about Cars & Trucks

1 Answer

Fuel system warning light on suddenly, will not stay started. This happened after getting the tire changed.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 42,218 Answers

Of course you have put fuel in the tank

Posted on May 05, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does tire light stay on 2011 Toyota?


Reset the Tire pressure monitoring system light. The reset button is located under the steering side under the finish panel. You have to bend down to see the button.
Operate the tire pressure warning system reset switch only after the inflation pressures of all 4 tires have been adjusted on the vehicle.
To initialize the system, press and hold the tire pressure warning system reset switch for 3 seconds or longer with the power switch turned IG-ON

Jul 23, 2014 | 2011 Toyota Highlander

1 Answer

Tyre Pressure and ABS


By operating the tire pressure warning system reset switch, tire pressure warning system ECU can be set to issue a warning at an inflation pressure that corresponds with the type of tires.
Operate the tire pressure warning system reset switch only after the inflation pressures of all 4 tires have been adjusted on the vehicle.
To initialize the system, press and hold the tire pressure warning system reset switch for 3 seconds or longer with the power switch turned IG-ON. When starting the initialization, the tire pressure warning light blinks 3 times at 0.5 Hz.
During the initialization, the tire pressure warning system valve & transmitter measures the inflation
pressure of the tires, and registers the signals that are transmitted into the ECU at a frequency of 1 per
minute. The initialization process is completed when the signals from the tires have been received.
Once the tire pressure warning system reset switch has been pressed, do not turn the Ignition switch OFF for a few minutes.

Mar 05, 2014 | 2002 Toyota Corolla

1 Answer

Show symbols of warnings on 2003 audi


If you have access to a VAG-com cable you can probably find out more specific info.

Could you possibly take a picture of it and upload it? Also, have you read the manual? Go through to the instrument cluster section and look for the symbol. Could be some like this...

2_15_2012_1_44_08_pm.jpg

This icon is a Low Tire Pressure Warning light. This light comes on if your vehicle's tire pressure monitoring system (TPMS) detects a tire that is more than 25 percent underinflated. Driving on a low tire can be dangerous because it increases the risk of a tire blowout. A low tire can also cause your vehicle to brake unevenly, pull to one side, handle poorly and get reduced fuel mileage. If the TPMS Low Tire Warning light is on, check the air pressure in your tires as soon as possible, and inflate them to the recommended pressure.

The other choice sound as Traction Control light. It normally lights if the car detects slippage and engages the ESP. It will stay lit if you press the ESP button on the center stack of the dash. If it stay lit all the time regardless then it means something in the ESP system is broken, but I don't have the expertise to know what...maybe ABS sensor(s), but I honestly don't know.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day

Feb 15, 2012 | 2003 Audi A6

1 Answer

Tpms light on, dic indicated low tp fr, inflated to proper pressure,tpms stays on, dic wont update


TPMS - TIRE PRESSURE MONITOR WARNING LIGHT
NOTE: Tire pressure rises and falls depending on heat caused by vehicle's operation and the outside temperature. If outside temperature is low, the air inside the tire may cool, causing a lower tire inflation pressure. This may cause the low tire pressure warning light to illuminate.

When the tire pressure warning light comes on, immediately check the air pressure of all tires and adjust to the specified pressure. Make sure the warning light goes off. If the warning light stays on or flashes, there is a malfunction in the TPM system. See appropriate manufacturer service information.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 13, 2012 | Cars & Trucks

1 Answer

Tyre pressure warning light showing when pressures are correct


Hi, the tire pressure monitor detects any changes in the tire inflation pressure. Therefore, it must initialize and store it in its memory if the tires or wheels have been replaced, re-inflated or the tires have been rotated. You can re-initialize the system by following these steps:

1. Check and make sure that your tires are inflated to the correct pressure

2. Turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (in the glove box) until the warning light turns off and then release the switch.

3. Now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. Initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

May 13, 2011 | Renault 18I Cars & Trucks

2 Answers

Had 4 new tires installed system blinked for 2 days on and off. now ligth stays on. how do you reset the light? all tires are at 35 psi.


It is possible that one of the sensors was damaged when they replaced the tires. If this occurred, the light will remain lit. Otherwise, after a pressure change the light will automatically turnoff after driving several minutes above 25MPH.

There is also a Nissan TPM reset tool which is designed to turn off the TPM warning light in 2003 and newer Nissan vehicles that have the TPM reset connector. Check your owner's manual to see if your vehicle has the connector. You can find the reset tool online for about $25.

Dec 11, 2009 | 2008 Nissan Frontier

3 Answers

The check tire pressure light and ABS auto traction sensor light keep coming on. Tire pressure is good


The tire pressure monitor detects any changes in the tire inflation pressure. Therefore, it must initialize and store it in its memory if the tires or wheels have been replaced, re-inflated or the tires have been rotated. You should be able to re-initialize the system by following these steps:

1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 11, 2009 | 2004 Cadillac Deville

2 Answers

Tire pressure warning light stays on all the time for no reason


The tire pressure monitor must be re-calibrated, this is a dealer only repair, no one else will touch it, these systems are very trouble prone.

Nov 25, 2008 | 2008 Toyota 4Runner

5 Answers

Switch off tire pressure warning light


From the manual: First find the reset button, located below the handbrake (emergency brake) lever. The button has an "exclamation mark in a tyre" symbol.

Make sure the pressures in all tyres are what you want them to be. 35psi all 'round is good for sporty driving.

Engine off. Turn ignition to the second position (ON) but don't start the engine.

Keep the re-set button pressed until the flat tyre indicator light on the dashboard COMES ON for several seconds.

Start the engine, and drive the car normally for several minutes. This will re-set the indicator to whatever pressures you have in the tyres. Hope this helps!!

May 15, 2008 | 2004 Mini Cooper

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...