Question about Toyota 4Runner
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You need a charcoal canister and vent control valve.
You also need the EGR solenoid valve (I think it the brown one).
Valve is located in the valley of the V, towards the transmission side of engine.
Do these 1st and reset light. You may have other issues but you have to start here.
Posted on Sep 16, 2008
More then likely its the Canister Purge Solenoid. you can find it online at www.autozone.com the part number is PV140. And to replace it on blazer you have to remove the spare tire. Alot of people don't know where this part is so I hope this helps you and good luck.
Posted on Oct 14, 2008
SOURCE: car codes
When you have P0440, P0441 and P0446, it is a very good bet that the fuel cap was loose, or the fuel cap rubber seal is compromised. You will get all three of those codes every time that the cap is loose. Always make sure that the fuel cap is as tight as you can get it after you refuel.
Posted on Nov 13, 2008
po505 idle air control if this is the code all hondas do it eventully, small problem easy fix u have 2 choices either remove the idle air control motor and clean the inside of it u will find it's black and the spring inside is stuck clean it with carb cleaner or gum cutter any parts store will have this it's a dirty job it will work for awhile but to replace it is recommended its not expensive for a new one which u can get at any autoparts store autozone,advanced,napa etc. there is only 2 bolts in most cases maybe 3 i doubt it though if u go online t google and type in th eyear make and model and engine size in ur case it's a 3.0 v6 and look for idle air control locations u'll find it to do this job a shop will charge u anywhere from 100.00 for diag to retrive the code plus the part and the labor so about 250.00-375.00 it will only take u honestly maybe 15 minutes to perform only tools needed are a 10 millimeter wrench there is only 1 connector to disconnect and ur done if u do this u will still have the check engine light because u have not cleared it from the computer to do this just disconnect the negative battery terminal (the black one or has a neg sign - don't disconnect the positive side +)for 5 minutes then reconnect and the computer will have reset no more light. good luck it really is that easy
Posted on Oct 10, 2009
Tips for a great answer:
Dec 13, 2017 | Cars & Trucks
Jun 01, 2015 | 2010 Toyota Corolla
Jan 22, 2013 | 2005 Toyota Highlander
Jun 05, 2012 | 2000 Toyota Camry
Feb 01, 2011 | Chevrolet Venture Cars & Trucks
Jan 30, 2010 | 2000 Pontiac Grand Am GT
Dec 15, 2009 | 1999 Lexus ES 300
Oct 03, 2009 | 2002 Toyota Camry
Jun 11, 2009 | 2001 Toyota Sequoia
Mar 22, 2009 | 2003 Chevrolet TrailBlazer
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: