Question about AC Cars & Trucks

Open Question

Voltas inverter AC display showing F3 error

Odu are 30 sec start and then ODU are trip

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Volta's AC was not cooling properly


Take it to a automotive AC service centre. It probably needs topping up with refrigerant gas.

Jun 19, 2016 | AC Cars & Trucks

1 Answer

04 chv p-up 4.8 5sp start an run 10 to 15 min then dies might start 1 more time for 30 sec an die again then start again an gages r trip in an radio


The very 1st thing you need to have done is a scan of the control module for fault codes. You will need a OBD2 code reader for this test, cost about $40 US

May 21, 2016 | Chevrolet Cars & Trucks

2 Answers

Temperature of my Voltas AC has changed from Celsius to Fahrenheit..How to change it back


May be the settings vary from one model of AC to another . In case of Voltas vertis premium AC ( Indian make ) , after turning it to OFF , pressing the MODE and " - " ie minus button simultaneously , the C and F could be shifted . This info is printed on the back of the remote itself .

Jun 04, 2013 | Cars & Trucks

1 Answer

How to reset the trip odometer in a 2002 jaguar x type


To the right (UK)/left(US) and on the dash below the sterring wheel level (near Fog light switch) you will see three buttons A B and Reset. With dash display showing trip millage of the one you wish to reset (A or B) press and hold the reset button for 5 secs.

Vist http://www.bluejag.co.uk for other useful info on your X-type

Dec 26, 2011 | 2002 Jaguar X-Type

1 Answer

How do I reset the computer after changing the battery in my 2004 mini cooper S? The car started three times. Now it won't start even though all of the other electrics work


Turn off ignition. Press and hold the trip reset button, then turn the ignition on (don't start the engine), within 5 sec the SIA status will be displayed. Release the reset button. Press and hold the trip reset button for 5 sec, "rst" will be displayed. Release and re-press trip reset button.

The new status should be displayed.

Oct 02, 2011 | 2004 Mini Cooper

2 Answers

Service indicator on Citroen C4 was reset today after dealer service, but when engine turned off and restarted again, service indicator spanner displaying again. Had to pick a make because Citroen not an...


yes their is no other makes catagory ,right iam not sure if this will work but i reset one yesterday on 2005 model and i held the trip meter button down and then turned to aux position then waited 30 secs then turned key to ignition position ,waited 30 secs then turned ignition off and then started engine and it went out ,but for how long?? i dont know as the owner has taken the vehicle

Sep 17, 2010 | Peugeot 405 Cars & Trucks

1 Answer

Error code on dash display


Take the vehicle to Auto Zone or O'Reilley's auto parts of any local auto parts store that offers to read stored codes for free and they will be able to tell you exactly what codes are showing and what they mean for free. In addition you will be able to by the repair parts while your there.

Jun 21, 2010 | 2006 Volvo V50

1 Answer

Oil change light.


On my 06, Set the display to Trip A and turn key to OFF. Hold the Trip reset down and turn key to ON (do not start RAV4). Wait about 5 sec until it displays 00000. Turn key to OFF and it should be reset.

Apr 02, 2010 | 2006 Toyota RAV4

2 Answers

How do I get the "change oil" message off my 2008 f 450 superduty?


Message center cluster
#1 press and release setup button until mess. cntr. displays"press reset to begin system check"
#2press and release reset button until cntr. displays"hold reset if new oil"
#3press and hold reset button for 2 sec. and release oil life should read 100%
#4 center displays"setup menu hold reset"

base cluster
#1 press and release trip/reset button until mess. cntr. displays"setup menu hold reset"
#2press and hold trip/reset button 2 sec. until mess cntr. displays"reset for system check"
#3 press and hold trip/reset button 2sec. until mess. cntr. displays"oil life XX% reset if new"
#4 press and release trip/reset button until mess.cntr.displays"hold reset if new oil"
#5 press and hold trip/reset button for 2 sec.and release to reset to 100%
#6 mess. cntr. breifly displays oil change set to 100%.

HOPE THIS HELPS

Feb 10, 2010 | 2008 Ford F 250 Super Duty 4WD

1 Answer

I have a 2004 Volvo S60. How can I clear the "Time for Regular Service" message. I service my own car.


Close all doors.Turn ignition key to position 1.PRESS AND HOLD trip reset button,immediately turn ignition to position2,keep trip button held untill trip is reset to 0.A yellow warning light will show when it is time to release trip button.Release within 4seconds ,a bleep will be confirm reset.Before you start reset, do not reset trip,If trip has been reset to 0,turn ignition to position 2 hold reset for 10- 15 secs untill previous reading is shown,then start reset.

Oct 31, 2009 | 2005 Volvo S60

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top AC Experts

Jeremy W.
Jeremy W.

Level 3 Expert

5332 Answers

JOHN LAPIER

Level 3 Expert

2428 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8125 Answers

Are you an AC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...